component
HCPL-7800A-000E
Public Made by Adomby adom
Broadcom AVAGO Isolation Amplifiers, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
hcpl-7800a-000e: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+91−11
package.json+49−9@@ -53,19 +53,19 @@ "number": "1", "name": "VDD1", "type": "power_in",- "description": "Input-side supply voltage; 4.5 V to 5.5 V recommended operating range (absolute max 5.5 V); draws up to 16.0 mA (IDD1 max); requires 0.1 \u00b5F bypass capacitor placed as close as possible to pin 1 and pin 4."+ "description": "Input-side supply voltage; 4.5 V to 5.5 V recommended operating range (absolute max 5.5 V); draws up to 16.0 mA (IDD1 max); requires 0.1 µF bypass capacitor placed as close as possible to pin 1 and pin 4." }, { "number": "2", "name": "VIN+", "type": "power_in",- "description": "Positive differential analog input; accurate/linear range \u2212200 mV to +200 mV, functional range \u22122 V to VDD1; equivalent input impedance 500 k\u03a9; input bias current typ. 5.0 \u00b5A max; RC anti-aliasing filter (39 \u03a9, 0.01 \u00b5F) recommended."+ "description": "Positive differential analog input; accurate/linear range −200 mV to +200 mV, functional range −2 V to VDD1; equivalent input impedance 500 kΩ; input bias current typ. 5.0 µA max; RC anti-aliasing filter (39 Ω, 0.01 µF) recommended." }, { "number": "3", "name": "VIN-", "type": "power_in",- "description": "Negative differential analog input; accurate/linear range \u2212200 mV to +200 mV; typically shorted to GND1 (pin 4) per recommended application circuit; if brought above VDD1 \u2212 2 V an internal LED-coupling test mode is activated."+ "description": "Negative differential analog input; accurate/linear range −200 mV to +200 mV; typically shorted to GND1 (pin 4) per recommended application circuit; if brought above VDD1 − 2 V an internal LED-coupling test mode is activated." }, { "number": "4",@@ -77,25 +77,25 @@ "number": "5", "name": "GND2", "type": "power_in",- "description": "Output-side ground return for VDD2 and output signals; galvanically isolated from GND1 by 3750 Vrms / 1 min (UL 1577), maximum working insulation voltage 891 VPEAK (IEC/EN/DIN EN 60747-5-2); requires 0.1 \u00b5F bypass capacitor to pin 8."+ "description": "Output-side ground return for VDD2 and output signals; galvanically isolated from GND1 by 3750 Vrms / 1 min (UL 1577), maximum working insulation voltage 891 VPEAK (IEC/EN/DIN EN 60747-5-2); requires 0.1 µF bypass capacitor to pin 8." }, { "number": "6", "name": "VOUT-", "type": "output",- "description": "Negative rail of fully differential output; output common-mode voltage 2.2 V min / 2.545 V typ / 2.8 V max; output resistance 15 \u03a9 typ; output short-circuit current 18.6 mA typ when shorted to VDD2 or GND2."+ "description": "Negative rail of fully differential output; output common-mode voltage 2.2 V min / 2.545 V typ / 2.8 V max; output resistance 15 Ω typ; output short-circuit current 18.6 mA typ when shorted to VDD2 or GND2." }, { "number": "7", "name": "VOUT+", "type": "output",- "description": "Positive rail of fully differential output; differential gain 7.92-8.08 V/V (HCPL-7800A, \u00b11% tolerance); \u22123 dB bandwidth 50 kHz min / 100 kHz typ; gain drift 0.00025 V/V/\u00b0C typ; output resistance 15 \u03a9 typ."+ "description": "Positive rail of fully differential output; differential gain 7.92-8.08 V/V (HCPL-7800A, ±1% tolerance); −3 dB bandwidth 50 kHz min / 100 kHz typ; gain drift 0.00025 V/V/°C typ; output resistance 15 Ω typ." }, { "number": "8", "name": "VDD2", "type": "power_in",- "description": "Output-side supply voltage; 4.5 V to 5.5 V recommended operating range (absolute max 5.5 V); draws up to 16.0 mA (IDD2 max); requires 0.1 \u00b5F bypass capacitor placed as close as possible to pin 8 and pin 5."+ "description": "Output-side supply voltage; 4.5 V to 5.5 V recommended operating range (absolute max 5.5 V); draws up to 16.0 mA (IDD2 max); requires 0.1 µF bypass capacitor placed as close as possible to pin 8 and pin 5." } ], "provenance": {@@ -132,6 +132,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "hcpl-7800a-000e.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 7.874,+ 9.27,+ 6.98+ ],+ "zmin_mm": -3.3,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "hcpl-7800a-000e-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 7.874,+ 9.27,+ 6.98+ ],+ "zmin_mm": -3.3,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "ad8959b1d7d6381ee659f7a433abe44a83b979c7a93ff40259d64a268c506af4",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -117,7 +117,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "hcpl-7800a-000e.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 7.874,+ 9.27,+ 6.98+ ],+ "zmin_mm": -3.3,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "hcpl-7800a-000e-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 7.874,+ 9.27,+ 6.98+ ],+ "zmin_mm": -3.3,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "ad8959b1d7d6381ee659f7a433abe44a83b979c7a93ff40259d64a268c506af4",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -165,4 +205,4 @@ "public": true }, "updated_at": "2026-09-24T21:36:47.672Z"-}+}