← Commit history
README.mdadded+78@@ -0,0 +1,78 @@+# HC89S105AK8T7CM++**Shanghai Holychip Elec** · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-32(7x7)++HC89S105AK8T7CM from Shanghai Holychip Elec, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | P3.7/INT7/SCK | bidirectional | GPIO P3.7. Alt: external interrupt INT7 input; two-wire ISP/debug clock input (SCK). |+| 2 | P5.4/XOUT | bidirectional | GPIO P5.4. Alt: external crystal oscillator output XOUT (analog). |+| 3 | P5.5/XIN | bidirectional | GPIO P5.5. Alt: external crystal oscillator input XIN (analog); supports 4-24 MHz HF crystal or 32.768 kHz LF crystal. |+| 4 | GND | power_in | Ground (power return). |+| 5 | P4.1/RST | bidirectional | External reset input (active low, Schmitt with pull-up) by factory default on the LQFP32 variant; may be reconfigured via code option as ordinary GPIO P4.1. |+| 6 | VDD | power_in | Main supply input. Operating range 2.0-5.5 V. Decouple to GND with ≥0.1 µF close to the pin. |+| 7 | P2.1/ADC9/INT9/TCK | bidirectional | GPIO P2.1. Alt: 12-bit ADC channel 9 (analog); external interrupt INT9; JTAG TCK clock input. |+| 8 | P2.2/ADC10/INT10/TDI | bidirectional | GPIO P2.2. Alt: ADC channel 10 (analog); external interrupt INT10; JTAG TDI data input. |+| 9 | P2.3/ADC11/INT11/TMS | bidirectional | GPIO P2.3. Alt: ADC channel 11 (analog); external interrupt INT11; JTAG TMS mode input. |+| 10 | P2.4/ADC12/INT12/TDO | bidirectional | GPIO P2.4. Alt: ADC channel 12 (analog); external interrupt INT12; JTAG TDO data output. |+| 11 | P2.5/ADC13/INT13/Vref | bidirectional | GPIO P2.5. Alt: ADC channel 13 (analog); external interrupt INT13; external ADC reference voltage Vref input/output. |+| 12 | P0.7/ADC23 | bidirectional | GPIO P0.7. Alt: ADC channel 23 analog input. |+| 13 | P0.6/ADC22 | bidirectional | GPIO P0.6. Alt: ADC channel 22 analog input. |+| 14 | P0.5/ADC21 | bidirectional | GPIO P0.5. Alt: ADC channel 21 analog input. |+| 15 | P0.4/ADC20 | bidirectional | GPIO P0.4. Alt: ADC channel 20 analog input. |+| 16 | P0.3/ADC19 | bidirectional | GPIO P0.3. Alt: ADC channel 19 analog input. |+| 17 | P0.1/ADC17/CMP3+ | bidirectional | GPIO P0.1. Alt: ADC channel 17 analog input; comparator 3 non-inverting (+) analog input. |+| 18 | P0.0/ADC16/CMP2+ | bidirectional | GPIO P0.0. Alt: ADC channel 16 analog input; comparator 2 non-inverting (+) analog input. |+| 19 | P4.2/PLVD/CMP- | bidirectional | GPIO P4.2. Alt: port low-voltage detect input PLVD (analog, 1.2 V threshold, interruptible); shared inverting (-) input of comparators CMP1/2/3. |+| 20 | P1.0/ADC0/CMP1+ | bidirectional | GPIO P1.0. Alt: ADC channel 0 analog input; comparator 1 non-inverting (+) analog input. |+| 21 | P1.1/ADC1 | bidirectional | GPIO P1.1. Alt: ADC channel 1 analog input. |+| 22 | P1.2/ADC2 | bidirectional | GPIO P1.2. Alt: ADC channel 2 analog input. |+| 23 | P1.3/ADC3 | bidirectional | GPIO P1.3. Alt: ADC channel 3 analog input. |+| 24 | P1.4/ADC4 | bidirectional | GPIO P1.4. Alt: ADC channel 4 analog input. |+| 25 | P5.3/ADC26 | bidirectional | GPIO P5.3. Alt: ADC channel 26 analog input. |+| 26 | P4.3/SDA | bidirectional | GPIO P4.3. Alt: two-wire ISP/debug data input/output (SDA). This is the debug SDA, not the IIC-bus SDA (IIC is PTM-mapped). |+| 27 | P3.1/INT3/ADC27 | bidirectional | GPIO P3.1. Alt: external interrupt INT3 input; ADC channel 27 analog input. |+| 28 | P3.2/ADC28 | bidirectional | GPIO P3.2. Alt: ADC channel 28 analog input. |+| 29 | P3.3/ADC29 | bidirectional | GPIO P3.3. Alt: ADC channel 29 analog input. |+| 30 | P3.4/INT4/ADC30 | bidirectional | GPIO P3.4. Alt: external interrupt INT4 input; ADC channel 30 analog input. |+| 31 | P3.5/INT5/ADC31 | bidirectional | GPIO P3.5. Alt: external interrupt INT5 input; ADC channel 31 analog input. |+| 32 | P3.6/INT6 | bidirectional | GPIO P3.6. Alt: external interrupt INT6 input. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Shanghai Holychip Elec |+| Package | LQFP-32(7x7) |+| Category | Single Chip Microcomputer/Microcontroller |+| Pins | 32 |++## Ordering variants++Same part, different packaging or reel option.++- `HC89S105AK8T7CM`+- `HC89S105AK8T7CMAS8T7CM`+- `HC89S105AS8T7CM`+- `HC89S105AK8T7CMAC8T7M`+- `HC89S105AC8T7M`++## CAD (KiCad official)++- Symbol: `HC89S105AK8T7CM`+- Footprint: `Package_QFP:LQFP-32_7x7mm_P0.8mm`+- 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Shanghai Holychip Elec datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589834571253374976) (221 pp, sha256 `6c85c1d6e46dbbbf`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/hc89s105ak8t7cm-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "hc89s105ak8t7cm",+ "version": "0.1.0",+ "type": "component",+ "description": "Shanghai Holychip Elec Microcontroller Units (MCUs/MPUs/SOCs), LQFP-32(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "single chip microcomputer-microcontroller",+ "hc89s105ak8t7cm"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "hc89s105ak8t7cm.kicad_sym",+ "hc89s105ak8t7cm.kicad_mod",+ "hc89s105ak8t7cm.glb",+ "hc89s105ak8t7cm.step",+ "hc89s105ak8t7cm.lbr",+ "docs/hero.png",+ "docs/hc89s105ak8t7cm-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}