← Commit history
hc32l176jata-lq48: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+314−1
page.json+314−1@@ -32,5 +32,318 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "HC32L176JATA-LQ48",+ "manufacturer": "XHSC",+ "package": "LQFP-48(7x7)",+ "pin_count": 48,+ "category": "Microcontrollers (MCU/MPU/SOC)",+ "parts": {+ "symbol": "hc32l176jata-lq48.kicad_sym",+ "footprint": "hc32l176jata-lq48.kicad_mod",+ "model_3d": "hc32l176jata-lq48-etched.glb",+ "model_3d_plain": "hc32l176jata-lq48.glb",+ "model_3d_step": "hc32l176jata-lq48-etched.step",+ "model_3d_step_plain": "hc32l176jata-lq48.step",+ "lbr": "hc32l176jata-lq48.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "VCAP",+ "type": "power_out",+ "description": "Internal LDO core-voltage output. Must be tied to an external decoupling capacitor of not less than 1 uF to DVSS; for internal circuit use only, do not draw current externally."+ },+ {+ "number": "2",+ "name": "PC13",+ "type": "bidirectional",+ "description": "General-purpose I/O on port C bit 13. Alternate digital functions: RTC_1HZ, TIM3_CH1B; analog function: LVD0 input."+ },+ {+ "number": "3",+ "name": "PC14/XTLI",+ "type": "bidirectional",+ "description": "General-purpose I/O on port C bit 14, or low-speed external crystal (XTL) input pin. Configure via clock control registers when driving a 32.768 kHz crystal."+ },+ {+ "number": "4",+ "name": "PC15/XTLO",+ "type": "bidirectional",+ "description": "General-purpose I/O on port C bit 15, or low-speed external crystal (XTL) output pin. Pairs with PC14/XTLI for the 32.768 kHz oscillator."+ },+ {+ "number": "5",+ "name": "PF00/XTHI",+ "type": "bidirectional",+ "description": "General-purpose I/O on port F bit 0, or high-speed external crystal (XTH) input (4-32 MHz). Alternate digital functions: I2C0_SDA, UART1_TXD."+ },+ {+ "number": "6",+ "name": "PF01/XTHO",+ "type": "bidirectional",+ "description": "General-purpose I/O on port F bit 1, or high-speed external crystal (XTH) output. Alternate digital functions: I2C0_SCL, TIM4_CHB, UART1_RXD."+ },+ {+ "number": "7",+ "name": "RESETB",+ "type": "input",+ "description": "Active-low external reset input with internal pull-up. Drive low to assert a chip reset."+ },+ {+ "number": "8",+ "name": "AVSS",+ "type": "power_in",+ "description": "Analog ground. Tie to the analog return of the ADC/DAC/OPA/VC supply; typically joined to DVSS at a single point."+ },+ {+ "number": "9",+ "name": "AVCC",+ "type": "power_in",+ "description": "Analog supply voltage (1.8-5.5 V) for ADC, DAC, comparators, and op-amp. Decouple with 100 nF close to the pin."+ },+ {+ "number": "10",+ "name": "PA00/SEG23",+ "type": "bidirectional",+ "description": "General-purpose I/O on port A bit 0. Digital alt: UART1_CTS, LPUART1_TXD, TIM0_ETR, VC0_OUT, TIM1_CHA, TIM3_ETR, TIM0_CHA. Analog: AIN0, VC0_INP4, VC0_INN0, VC1_INP0, VC1_INN4. LCD SEG23."+ },+ {+ "number": "11",+ "name": "PA01/SEG22",+ "type": "bidirectional",+ "description": "General-purpose I/O on port A bit 1. Digital alt: UART1_RTS, LPUART1_RXD, TIM0_CHB, TIM1_ETR, TIM1_CHB, HCLK_OUT, SPI1_MOSI. Analog: AIN1, VC0_INP5, VC0_INN1, VC1_INP1, VC1_INN5. LCD SEG22."+ },+ {+ "number": "12",+ "name": "PA02/SEG21",+ "type": "bidirectional",+ "description": "General-purpose I/O on port A bit 2. Digital alt: UART1_TXD, TIM0_CHA, VC1_OUT, TIM1_CHA, TIM2_CHA, PCLK_OUT, SPI1_MISO. Analog: AIN2, VC0_INP6, VC0_INN2, VC1_INP2. LCD SEG21."+ },+ {+ "number": "13",+ "name": "PA03/SEG20",+ "type": "bidirectional",+ "description": "General-purpose I/O on port A bit 3. Digital alt: UART1_RXD, TIM0_GATE, TIM1_CHB, TIM2_CHB, SPI1_CS, TIM3_CH1A, TIM5_CHA. Analog: AIN3, VC0_INP7, VC0_INN3, VC1_INP3. LCD SEG20."+ },+ {+ "number": "14",+ "name": "PA04/SEG19",+ "type": "bidirectional",+ "description": "General-purpose I/O on port A bit 4. Digital alt: SPI0_CS, UART1_TXD, PCA_CH4, TIM2_ETR, TIM5_CHA, LVD_OUT, TIM3_CH2B. Analog: AIN4, VC0_INP8, VC0_INN4, VC1_INP4, DAC_OUT, OPA_OUT0. LCD SEG19."+ },+ {+ "number": "15",+ "name": "PA05/SEG18",+ "type": "bidirectional",+ "description": "General-purpose I/O on port A bit 5. Digital alt: SPI0_SCK, TIM0_ETR, PCA_ECI, TIM0_CHA, TIM5_CHB, XTL_OUT, XTH_OUT. Analog: AIN5, VC0_INP9, VC0_INN5, VC1_INP5, VC2_INP0, VC2_INN0, OPA_OUT1. LCD SEG18."+ },+ {+ "number": "16",+ "name": "PA06/SEG17",+ "type": "bidirectional",+ "description": "General-purpose I/O on port A bit 6. Digital alt: SPI0_MISO, PCA_CH0, TIM3_BK, TIM1_CHA, VC0_OUT, TIM3_GATE, LPUART0_CTS. Analog: AIN6, VC0_INP10, VC0_INN6, OPA_OUT2. LCD SEG17."+ },+ {+ "number": "17",+ "name": "PA07/SEG16",+ "type": "bidirectional",+ "description": "General-purpose I/O on port A bit 7. Digital alt: SPI0_MOSI, PCA_CH1, HCLK_OUT, TIM3_CH0B, TIM2_CHA, VC1_OUT, TIM4_CHB. Analog: AIN7, VC0_INP11, VC0_INN7, OPA_OUT3. LCD SEG16."+ },+ {+ "number": "18",+ "name": "PB00/SEG13",+ "type": "bidirectional",+ "description": "General-purpose I/O on port B bit 0. Digital alt: PCA_CH2, TIM3_CH1B, LPUART0_TXD, TIM5_CHB, RCH_OUT, RCL_OUT, PLL_OUT. Analog: AIN8, VC0_INN10, VC1_INN6, OPA_INP. LCD SEG13."+ },+ {+ "number": "19",+ "name": "PB01/SEG12",+ "type": "bidirectional",+ "description": "General-purpose I/O on port B bit 1. Digital alt: PCA_CH3, PCLK_OUT, TIM3_CH2B, TIM6_CHB, LPUART0_RTS, VC2_OUT, TCLK_OUT. Analog: AIN9/EXVREF, VC1_INP6, VC1_INN7, VC2_INP1, VC2_INN1. LCD SEG12."+ },+ {+ "number": "20",+ "name": "PB02/SEG11",+ "type": "bidirectional",+ "description": "General-purpose I/O on port B bit 2. Digital alt: LPTIM0_TOG, PCA_ECI, LPUART1_TXD, TIM4_CHA, TIM1_BK, TIM0_BK, TIM2_BK. Analog: AIN16, VC1_INP7, VC1_INN8. LCD SEG11."+ },+ {+ "number": "21",+ "name": "PB10/SEG10",+ "type": "bidirectional",+ "description": "General-purpose I/O on port B bit 10. Digital alt: I2C1_SCL, SPI1_SCK, TIM1_CHA, LPUART0_TXD, TIM3_CH1A, LPUART1_RTS, UART1_RTS. Analog: AIN17, VC1_INP8. LCD SEG10."+ },+ {+ "number": "22",+ "name": "PB11/SEG9",+ "type": "bidirectional",+ "description": "General-purpose I/O on port B bit 11. Digital alt: I2C1_SDA, TIM1_CHB, LPUART0_RXD, TIM2_GATE, TIM6_CHA, LPUART1_CTS, UART1_CTS. Analog: AIN18, VC2_INP8, VC2_INN4. LCD SEG9."+ },+ {+ "number": "23",+ "name": "DVSS",+ "type": "power_in",+ "description": "Digital ground return for the core, I/O ring, and digital peripherals."+ },+ {+ "number": "24",+ "name": "DVCC",+ "type": "power_in",+ "description": "Digital supply voltage (1.8-5.5 V) for the I/O ring and digital peripherals. Decouple with 100 nF close to the pin."+ },+ {+ "number": "25",+ "name": "PB12/SEG8",+ "type": "bidirectional",+ "description": "General-purpose I/O on port B bit 12. Digital alt: SPI1_CS, TIM3_BK, LPUART0_TXD, TIM0_BK, LPUART0_RTS, TIM6_CHA. Analog: AIN19, VC1_INP9. LCD SEG8."+ },+ {+ "number": "26",+ "name": "PB13/SEG7",+ "type": "bidirectional",+ "description": "General-purpose I/O on port B bit 13. Digital alt: SPI1_SCK, I2C1_SCL, TIM3_CH0B, LPUART0_CTS, TIM1_CHA, TIM1_GATE, TIM6_CHB. Analog: AIN20, VC1_INP10. LCD SEG7."+ },+ {+ "number": "27",+ "name": "PB14/SEG6",+ "type": "bidirectional",+ "description": "General-purpose I/O on port B bit 14. Digital alt: SPI1_MISO, I2C1_SDA, TIM3_CH1B, TIM0_CHA, RTC_1HZ, LPUART0_RTS, TIM1_BK. Analog: AIN21, VC1_INP11, VC2_INP9, VC2_INN5. LCD SEG6."+ },+ {+ "number": "28",+ "name": "PB15/SEG5",+ "type": "bidirectional",+ "description": "General-purpose I/O on port B bit 15. Digital alt: SPI1_MOSI, TIM3_CH2B, TIM0_CHB, TIM0_GATE, LPUART1_RXD. Analog: AIN22. LCD SEG5."+ },+ {+ "number": "29",+ "name": "PA08/SEG0",+ "type": "bidirectional",+ "description": "General-purpose I/O on port A bit 8. Digital alt: UART0_TXD, TIM3_CH0A, TIM1_GATE, TIM4_CHA, TIM3_BK. LCD SEG0."+ },+ {+ "number": "30",+ "name": "PA09/COM0",+ "type": "bidirectional",+ "description": "General-purpose I/O on port A bit 9. Digital alt: UART0_TXD, TIM3_CH1A, TIM0_BK, I2C0_SCL, HCLK_OUT, TIM5_CHA. LCD COM0 common driver."+ },+ {+ "number": "31",+ "name": "PA10/COM1",+ "type": "bidirectional",+ "description": "General-purpose I/O on port A bit 10. Digital alt: UART0_RXD, TIM3_CH2A, TIM2_BK, I2C0_SDA, TIM2_GATE, PCLK_OUT, TIM6_CHA. LCD COM1 common driver."+ },+ {+ "number": "32",+ "name": "PA11/COM2",+ "type": "bidirectional",+ "description": "General-purpose I/O on port A bit 11. Digital alt: UART0_CTS, TIM3_GATE, I2C1_SCL, VC0_OUT, SPI0_MISO, TIM4_CHB. LCD COM2 common driver."+ },+ {+ "number": "33",+ "name": "PA12/COM3",+ "type": "bidirectional",+ "description": "General-purpose I/O on port A bit 12. Digital alt: UART0_RTS, TIM3_ETR, I2C1_SDA, VC1_OUT, SPI0_MOSI, PCNT_S0. LCD COM3 common driver."+ },+ {+ "number": "34",+ "name": "PA13/SWDIO",+ "type": "bidirectional",+ "description": "SWD data pin (default after reset) or general-purpose I/O on port A bit 13. Digital alt: IR_OUT, UART0_RXD, LVD_OUT, TIM3_ETR, RTC_1HZ, PCNT_S1, VC2_OUT."+ },+ {+ "number": "35",+ "name": "PF06",+ "type": "bidirectional",+ "description": "General-purpose I/O on port F bit 6. Digital alt: I2C1_SCL, LPUART1_CTS, UART0_CTS."+ },+ {+ "number": "36",+ "name": "PF07",+ "type": "bidirectional",+ "description": "General-purpose I/O on port F bit 7. Digital alt: I2C1_SDA, LPUART1_RTS, UART0_RTS."+ },+ {+ "number": "37",+ "name": "PA14/SWCLK",+ "type": "bidirectional",+ "description": "SWD clock pin (default after reset) or general-purpose I/O on port A bit 14. Digital alt: UART1_TXD, UART0_TXD, TIM3_CH2A, LVD_OUT, RCH_OUT, RCL_OUT, PLL_OUT."+ },+ {+ "number": "38",+ "name": "PA15",+ "type": "bidirectional",+ "description": "General-purpose I/O on port A bit 15. Digital alt: SPI0_CS, UART1_RXD, LPUART1_RTS, TIM0_ETR, TIM0_CHA, TIM3_CH1A."+ },+ {+ "number": "39",+ "name": "PB03/SEG35/VLCDH",+ "type": "bidirectional",+ "description": "General-purpose I/O on port B bit 3. Digital alt: SPI0_SCK, TIM0_CHB, TIM1_GATE, TIM3_CH0A, LPTIM0_GATE, XTL_OUT, XTH_OUT. Analog: VC1_INN9. LCD SEG35 or LCD VLCDH bias-generator top-rail pin."+ },+ {+ "number": "40",+ "name": "PB04/SEG34/VLCD3",+ "type": "bidirectional",+ "description": "General-purpose I/O on port B bit 4. Digital alt: SPI0_MISO, PCA_CH0, TIM2_BK, UART0_CTS, TIM2_GATE, TIM3_CH0B, LPTIM0_ETR. Analog: VC0_INP12, VC1_INP12. LCD SEG34 or LCD VLCD3 bias pin."+ },+ {+ "number": "41",+ "name": "PB05/SEG33/VLCD2",+ "type": "bidirectional",+ "description": "General-purpose I/O on port B bit 5. Digital alt: SPI0_MOSI, TIM1_BK, PCA_CH1, LPTIM0_GATE, PCNT_S0, UART0_RTS. Analog: VC0_INP13. LCD SEG33 or LCD VLCD2 bias pin."+ },+ {+ "number": "42",+ "name": "PB06/SEG32/VLCD1",+ "type": "bidirectional",+ "description": "General-purpose I/O on port B bit 6. Digital alt: I2C0_SCL, UART0_TXD, TIM1_CHB, TIM0_CHA, LPTIM0_ETR, TIM3_CH0A, LPTIM0_TOG. Analog: VC0_INP14, VC1_INP14. LCD SEG32 or LCD VLCD1 bias pin."+ },+ {+ "number": "43",+ "name": "PB07/SEG31",+ "type": "bidirectional",+ "description": "General-purpose I/O on port B bit 7. Digital alt: I2C0_SDA, UART0_RXD, TIM2_CHB, LPUART1_CTS, TIM0_CHB, LPTIM0_TOGN, PCNT_S1. Analog: VC1_INP15, LVD2. LCD SEG31."+ },+ {+ "number": "44",+ "name": "BOOT0/PF11/SEG30",+ "type": "input",+ "description": "BOOT0 selection pin sampled at reset - high enters ISP mode (Flash programming over the ISP protocol), low enters user mode (executes application from Flash; SWD programming still available). Also usable as GPIO PF11 or LCD SEG30 after reset."+ },+ {+ "number": "45",+ "name": "PB08/SEG29",+ "type": "bidirectional",+ "description": "General-purpose I/O on port B bit 8. Digital alt: I2C0_SCL, TIM1_CHA, TIM2_CHA, TIM0_GATE, TIM3_CH2A, UART0_TXD. Analog: LVD1. LCD SEG29."+ },+ {+ "number": "46",+ "name": "PB09/SEG28",+ "type": "bidirectional",+ "description": "General-purpose I/O on port B bit 9. Digital alt: I2C0_SDA, IR_OUT, SPI1_CS, TIM2_CHA, TIM2_CHB, UART0_RXD. LCD SEG28."+ },+ {+ "number": "47",+ "name": "DVSS",+ "type": "power_in",+ "description": "Digital ground return for the core, I/O ring, and digital peripherals (second ground pin)."+ },+ {+ "number": "48",+ "name": "DVCC",+ "type": "power_in",+ "description": "Digital supply voltage (1.8-5.5 V) for the I/O ring and digital peripherals (second supply pin). Decouple with 100 nF close to the pin."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}