← Commit history

gx21m15u: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·978d707bc1 · ·parent 341979a
1 file changed +74−1
page.json+74−1
@@ -33,5 +33,78 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "GX21M15U",+    "manufacturer": "GXCAS",+    "package": "MSOP-8",+    "pin_count": 8,+    "category": "Temperature and Humidity Sensor",+    "parts": {+      "symbol": "gx21m15u.kicad_sym",+      "footprint": "gx21m15u.kicad_mod",+      "model_3d": "gx21m15u-etched.glb",+      "model_3d_plain": "gx21m15u.glb",+      "model_3d_step": "gx21m15u-etched.step",+      "model_3d_step_plain": "gx21m15u.step",+      "lbr": "gx21m15u.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "SDA",+        "type": "bidirectional",+        "description": "I²C bus bidirectional data line; open-drain output requiring an external pull-up (≈10 kΩ typical). VOL ≤ 0.4 V at IOL = 3 mA. Do not leave floating."+      },+      {+        "number": "2",+        "name": "SCL",+        "type": "input",+        "description": "I²C bus clock input, digital. Operates 20 Hz to 400 kHz, VIH ≥ 0.7·VCC, VIL ≤ 0.3·VCC, ~500 mV input hysteresis. Requires an external pull-up per I²C spec; do not leave floating."+      },+      {+        "number": "3",+        "name": "OS",+        "type": "output",+        "description": "Overtemperature shutdown / interrupt output; open-drain. Asserts when temperature exceeds Tth(ots) (default 80 °C) and releases per comparator/interrupt mode configured in the Conf register. Polarity programmable (default active-low). Sink capability up to 10 mA (abs max); recommend pull-up up to 200 kΩ to minimize self-heating."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference; connect to system ground."+      },+      {+        "number": "5",+        "name": "A2",+        "type": "input",+        "description": "I²C slave-address bit 2 (MSB of the 3 user address bits). Tie to GND (logic 0) or VCC (logic 1); no internal bias, must not float. Combined with the fixed '1001' upper nibble to form the 7-bit slave address (1001 A2 A1 A0)."+      },+      {+        "number": "6",+        "name": "A1",+        "type": "input",+        "description": "I²C slave-address bit 1. Tie to GND or VCC; must not float. Part of the 7-bit slave address (1001 A2 A1 A0)."+      },+      {+        "number": "7",+        "name": "A0",+        "type": "input",+        "description": "I²C slave-address bit 0 (LSB of the 3 user address bits). Tie to GND or VCC; must not float. Enables up to 8 devices on the same bus."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage input; 2.8 V to 5.5 V recommended operating range (absolute max 6.0 V). Bypass with 0.1 µF decoupling capacitor to GND close to the pin. Typical supply current 80 µA (I²C idle), 0.2 µA in shutdown."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}