← Commit history

Initial commit: component/gx21m15u

Ray ·2753cf771f ·
2 files changed +86
README.mdadded+52
@@ -0,0 +1,52 @@+# GX21M15U++**GXCAS** · Temperature and Humidity Sensor · MSOP-8++GX21M15U from GXCAS, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SDA | bidirectional | I²C bus bidirectional data line; open-drain output requiring an external pull-up (≈10 kΩ typical). VOL ≤ 0.4 V at IOL = 3 mA. Do not leave floating. |+| 2 | SCL | input | I²C bus clock input, digital. Operates 20 Hz to 400 kHz, VIH ≥ 0.7·VCC, VIL ≤ 0.3·VCC, ~500 mV input hysteresis. Requires an external pull-up per I²C spec; do not leave floating. |+| 3 | OS | output | Overtemperature shutdown / interrupt output; open-drain. Asserts when temperature exceeds Tth(ots) (default 80 °C) and releases per comparator/interrupt mode configured in the Conf register. Polarity programmable (default active-low). Sink capability up to 10 mA (abs max); recommend pull-up up to 200 kΩ to minimize self-heating. |+| 4 | GND | power_in | Ground reference; connect to system ground. |+| 5 | A2 | input | I²C slave-address bit 2 (MSB of the 3 user address bits). Tie to GND (logic 0) or VCC (logic 1); no internal bias, must not float. Combined with the fixed '1001' upper nibble to form the 7-bit slave address (1001 A2 A1 A0). |+| 6 | A1 | input | I²C slave-address bit 1. Tie to GND or VCC; must not float. Part of the 7-bit slave address (1001 A2 A1 A0). |+| 7 | A0 | input | I²C slave-address bit 0 (LSB of the 3 user address bits). Tie to GND or VCC; must not float. Enables up to 8 devices on the same bus. |+| 8 | VCC | power_in | Supply voltage input; 2.8 V to 5.5 V recommended operating range (absolute max 6.0 V). Bypass with 0.1 µF decoupling capacitor to GND close to the pin. Typical supply current 80 µA (I²C idle), 0.2 µA in shutdown. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | GXCAS |+| Package | MSOP-8 |+| Category | Sensor |+| Pins | 8 |++## Ordering variants++- `GX21M15U-T&R`+- `GX21M15U`+- `GX21M15UGX21M15-T&R`+- `GX21M15UGX21M15D-T&R`+- `GX21M15UGX21M15D`++## CAD (KiCad official)++- Symbol: `GX21M15U`+- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`+- 3D model: MSOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [GXCAS datasheet](docs/gx21m15u-datasheet.pdf) (None pp, sha256 `a29f7f228c0cfe5c`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/gx21m15u-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "gx21m15u",+  "version": "0.1.0",+  "type": "component",+  "description": "GXCAS Temperature and Humidity Sensor, MSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "sensor",+    "gx21m15u"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "gx21m15u.kicad_sym",+    "gx21m15u.kicad_mod",+    "gx21m15u.glb",+    "gx21m15u.step",+    "gx21m15u.lbr",+    "docs/hero.png",+    "docs/gx21m15u-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file