← Commit history
gs8092-mr: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+74−1
page.json+74−1@@ -33,5 +33,78 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "GS8092-MR",+ "manufacturer": "Gainsil",+ "package": "MSOP-8",+ "pin_count": 8,+ "category": "Operational Amplifier",+ "parts": {+ "symbol": "gs8092-mr.kicad_sym",+ "footprint": "gs8092-mr.kicad_mod",+ "model_3d": "gs8092-mr-etched.glb",+ "model_3d_plain": "gs8092-mr.glb",+ "model_3d_step": "gs8092-mr-etched.step",+ "model_3d_step_plain": "gs8092-mr.step",+ "lbr": "gs8092-mr.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "OUTA",+ "type": "output",+ "description": "Output of amplifier A. Rail-to-rail output; typically swings within 30mV of the supply rails into >=1k ohm loads and within 120mV into 150 ohm loads. Output current capability >=100mA (min at +25 C)."+ },+ {+ "number": "2",+ "name": "INA-",+ "type": "input",+ "description": "Inverting input of amplifier A. High-impedance CMOS input; typical input bias current 1pA. Input voltage must remain within Vss-0.5V to VDD+0.5V absolute-max range."+ },+ {+ "number": "3",+ "name": "INA+",+ "type": "input",+ "description": "Non-inverting input of amplifier A. High-impedance CMOS input; input common-mode voltage range typically -0.2V to +3.8V on a +5V supply."+ },+ {+ "number": "4",+ "name": "VSS",+ "type": "power_in",+ "description": "Negative supply / ground pin. Connect to GND for single-supply operation (+2.5V to +5.5V at VDD) or to the negative rail for dual-supply (+/-1.25V to +/-2.75V) operation. Bypass with a 0.1uF ceramic capacitor to ground in dual-supply mode."+ },+ {+ "number": "5",+ "name": "INB+",+ "type": "input",+ "description": "Non-inverting input of amplifier B. High-impedance CMOS input; input common-mode voltage range typically -0.2V to +3.8V on a +5V supply."+ },+ {+ "number": "6",+ "name": "INB-",+ "type": "input",+ "description": "Inverting input of amplifier B. High-impedance CMOS input; typical input bias current 1pA."+ },+ {+ "number": "7",+ "name": "OUTB",+ "type": "output",+ "description": "Output of amplifier B. Rail-to-rail output with the same drive characteristics as OUTA (>=100mA output current, <=120mV swing from rail into 150 ohm loads)."+ },+ {+ "number": "8",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive supply pin. Operating range +2.5V to +5.5V single-supply (absolute max 7.5V VDD-VSS). Bypass with a 0.1uF ceramic capacitor placed close to the pin for best AC performance."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}