component
GP7596A
Public Made by Adomby adom
HaloChip Synchronous Rectifier Controllers, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+6−3@@ -50,13 +50,13 @@ "number": "4", "name": "VCC", "type": "power_in",- "description": "Chip supply pin, nominally 5 V (UVLO on 3.7 V, UVLO off 2.8 V, internally clamped to 6 V at 20 mA). Place a bypass capacitor (typ. 1 \u00b5F) close to this pin; the internal HV LDO charges VCC from SW/SWS so no auxiliary winding is needed."+ "description": "Chip supply pin, nominally 5 V (UVLO on 3.7 V, UVLO off 2.8 V, internally clamped to 6 V at 20 mA). Place a bypass capacitor (typ. 1 µF) close to this pin; the internal HV LDO charges VCC from SW/SWS so no auxiliary winding is needed." }, { "number": "5", "name": "SW", "type": "power_out",- "description": "Drain of the integrated synchronous-rectifier power MOSFET. Operating drain-source voltage rated to 65 V (recommended 4.7-60 V); RDS(on) 18 m\u03a9 for the GP7596A. Tie pins 5-8 in parallel to carry the SR current with minimum resistance."+ "description": "Drain of the integrated synchronous-rectifier power MOSFET. Operating drain-source voltage rated to 65 V (recommended 4.7-60 V); RDS(on) 18 mΩ for the GP7596A. Tie pins 5-8 in parallel to carry the SR current with minimum resistance." }, { "number": "6",@@ -176,5 +176,8 @@ "docs/gp7596a-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }