component
GN4051B
Public Made by Adomby adom
GN Semic Analog Switches, Multiplexers, SOP-16. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -44,7 +44,7 @@ "number": "3", "name": "Z", "type": "bidirectional",- "description": "Common analog I/O. Bidirectional: signals may flow Z\u2192Yn (demux) or Yn\u2192Z (mux). Routed to one of Y0-Y7 selected by A2:A0 when E is low."+ "description": "Common analog I/O. Bidirectional: signals may flow Z→Yn (demux) or Yn→Z (mux). Routed to one of Y0-Y7 selected by A2:A0 when E is low." }, { "number": "4",@@ -62,13 +62,13 @@ "number": "6", "name": "E", "type": "input",- "description": "Active-low enable input. When E = low, the selected Yn\u2194Z channel is on. When E = high, all channels are OFF (high-impedance) regardless of A2:A0. Digital logic input referenced to VSS."+ "description": "Active-low enable input. When E = low, the selected Yn↔Z channel is on. When E = high, all channels are OFF (high-impedance) regardless of A2:A0. Digital logic input referenced to VSS." }, { "number": "7", "name": "VEE", "type": "power_in",- "description": "Negative analog supply (typically 0 V to \u22126 V). Sets the negative excursion limit for analog signals through the switch. Tie to VSS (0 V) for single-supply digital-signal switching; connect to a negative rail for bipolar analog signals. VDD\u2212VEE must not exceed 9 V."+ "description": "Negative analog supply (typically 0 V to −6 V). Sets the negative excursion limit for analog signals through the switch. Tie to VSS (0 V) for single-supply digital-signal switching; connect to a negative rail for bipolar analog signals. VDD−VEE must not exceed 9 V." }, { "number": "8",@@ -80,7 +80,7 @@ "number": "9", "name": "A2", "type": "input",- "description": "Address select input, MSB of the 3-bit channel select. Combined with A1:A0 to choose which Y0-Y7 connects to Z. Logic input referenced to VSS/VDD; VIH \u2265 3.5 V at VDD = 5 V."+ "description": "Address select input, MSB of the 3-bit channel select. Combined with A1:A0 to choose which Y0-Y7 connects to Z. Logic input referenced to VSS/VDD; VIH ≥ 3.5 V at VDD = 5 V." }, { "number": "10",@@ -186,5 +186,8 @@ "docs/gn4051b-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }