← Commit history
README.mdadded+64@@ -0,0 +1,64 @@+# GN1638++**GN Semic** · LED Display Drivers · SOP-28-300mil++GN1638 from GN Semic, in a SOP-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | K1 | input | Key-scan data input 1. Data on this pin is latched after the end of the display cycle. Has an internal ~10 kΩ pull-down (RL, K1~K3). |+| 2 | K2 | input | Key-scan data input 2. Data on this pin is latched after the end of the display cycle. Has an internal ~10 kΩ pull-down. |+| 3 | K3 | input | Key-scan data input 3. Data on this pin is latched after the end of the display cycle. Has an internal ~10 kΩ pull-down. |+| 4 | VDD | power_in | Logic supply voltage. 5 V typical (3.0 V min, 5.5 V max recommended; absolute max 7.0 V). Tied together with pin 15. |+| 5 | SEG1/KS1 | output | Segment output 1 with muxed key-scan strobe KS1. P-channel open-drain, sourcing up to 25 mA typical (Vo = VDD-2V) for driving LED anodes; also drives the KS1 row of the 8x3 key matrix during scanning. |+| 6 | SEG2/KS2 | output | Segment output 2 with muxed key-scan strobe KS2. P-channel open-drain LED segment driver and key matrix row strobe. |+| 7 | SEG3/KS3 | output | Segment output 3 with muxed key-scan strobe KS3. P-channel open-drain LED segment driver and key matrix row strobe. |+| 8 | SEG4/KS4 | output | Segment output 4 with muxed key-scan strobe KS4. P-channel open-drain LED segment driver and key matrix row strobe. |+| 9 | SEG5/KS5 | output | Segment output 5 with muxed key-scan strobe KS5. P-channel open-drain LED segment driver and key matrix row strobe. |+| 10 | SEG6/KS6 | output | Segment output 6 with muxed key-scan strobe KS6. P-channel open-drain LED segment driver and key matrix row strobe. |+| 11 | SEG7/KS7 | output | Segment output 7 with muxed key-scan strobe KS7. P-channel open-drain LED segment driver and key matrix row strobe. |+| 12 | SEG8/KS8 | output | Segment output 8 with muxed key-scan strobe KS8. P-channel open-drain LED segment driver and key matrix row strobe. |+| 13 | SEG9 | output | Segment output 9. P-channel open-drain LED segment driver, sourcing up to 25 mA typical (Vo = VDD-2V). Not muxed with key scan. |+| 14 | SEG10 | output | Segment output 10. P-channel open-drain LED segment driver, sourcing up to 25 mA typical (Vo = VDD-2V). Not muxed with key scan. |+| 15 | VDD | power_in | Logic supply voltage (5 V ±10%). Tied together with pin 4. |+| 16 | GR8 | output | Grid (digit) output 8. N-channel open-drain sink, IOL typ 140 mA @ Vo=0.3 V. Connects to the common cathode of digit 8 in a common-cathode LED display. |+| 17 | GR7 | output | Grid (digit) output 7. N-channel open-drain sink, IOL typ 140 mA @ Vo=0.3 V. |+| 18 | GND | power_in | Logic ground. Connect to system ground; tied together with pin 25. |+| 19 | GR6 | output | Grid (digit) output 6. N-channel open-drain sink, IOL typ 140 mA @ Vo=0.3 V. |+| 20 | GR5 | output | Grid (digit) output 5. N-channel open-drain sink, IOL typ 140 mA @ Vo=0.3 V. |+| 21 | GR4 | output | Grid (digit) output 4. N-channel open-drain sink, IOL typ 140 mA @ Vo=0.3 V. |+| 22 | GR3 | output | Grid (digit) output 3. N-channel open-drain sink, IOL typ 140 mA @ Vo=0.3 V. |+| 23 | GR2 | output | Grid (digit) output 2. N-channel open-drain sink, IOL typ 140 mA @ Vo=0.3 V. |+| 24 | GR1 | output | Grid (digit) output 1. N-channel open-drain sink, IOL typ 140 mA @ Vo=0.3 V. |+| 25 | GND | power_in | Logic ground. Connect to system ground; tied together with pin 18. |+| 26 | DIO | bidirectional | Serial data input/output for the proprietary 3-wire (CLK/DIO/STB) interface, LSB first. N-channel open-drain when driving out; needs an external 1 k-10 kΩ pull-up (10 kΩ recommended) to VDD when reading key data. Data is sampled on the rising edge of CLK. |+| 27 | CLK | input | Serial clock input for the 3-wire interface. Data on DIO is shifted on the rising edge. Max clock frequency 1 MHz @ 50% duty cycle. |+| 28 | STB | input | Chip-select / strobe. A rising or falling edge initializes the serial interface; the first byte after STB goes low is interpreted as a command. When STB is high, CLK is ignored and any in-progress transfer is treated as invalid. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | GN Semic |+| Package | SOP-28-300mil |+| Category | LED-drv |+| Pins | 28 |++## CAD (KiCad official)++- Symbol: `GN1638`+- Footprint: `Package_SO:SOP-28_8.4x18.16mm_P1.27mm`+- 3D model: SOP-28-300mil (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [GN Semic datasheet](docs/gn1638-datasheet.pdf) (None pp, sha256 `db9355f571cb2752`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/gn1638-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "gn1638",+ "version": "0.1.0",+ "type": "component",+ "description": "GN Semic LED Display Drivers, SOP-28-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "led-drv",+ "gn1638"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "gn1638.kicad_sym",+ "gn1638.kicad_mod",+ "gn1638.glb",+ "gn1638.step",+ "gn1638.lbr",+ "docs/hero.png",+ "docs/gn1638-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}