← Commit history
README.mdadded+68@@ -0,0 +1,68 @@+# GN1628T++**GN Semic** · LED Display Drivers · SSOP-28-150mil++GN1628T from GN Semic, in a SSOP-28-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | NC | unconnected | No connect. Leave floating. |+| 2 | DIO | bidirectional | Serial data I/O for the 3-wire host interface. N-channel open-drain output with an internal ~24 kΩ pull-up to VDD. Data is shifted LSB first synchronous to CLK; direction switches between write (display RAM) and read (key-scan) cycles. |+| 3 | CLK | input | Serial clock input for the 3-wire host interface. Data on DIO is sampled on the rising edge. Max clock frequency 1 MHz at 50% duty; min pulse width 400 ns. |+| 4 | STB | input | Chip-select / strobe input. A falling edge starts a command/data frame; the rising edge latches it. Held high between transfers. |+| 5 | K1 | input | Key-matrix return line 1. Input with internal ~10 kΩ pull-down; driven high through the pressed key by the currently scanning KSn line. |+| 6 | K2 | input | Key-matrix return line 2. Input with internal ~10 kΩ pull-down; second row of the 10x2 key matrix. |+| 7 | VDD | power_in | Positive supply, 3.0-5.5 V (typ 5 V). Bypass to GND with a local decoupling capacitor. Tied internally to pin 21. |+| 8 | SEG1/KS1 | output | Muxed LED segment output SEG1 / key-scan drive line KS1. P-channel open-drain output; sources up to -25 mA typ (-40 mA max) for LED anode drive and pulses to strobe key column 1 during key scan. |+| 9 | SEG2/KS2 | output | Muxed LED segment output SEG2 / key-scan drive line KS2. P-channel open-drain, same drive rating as SEG1/KS1. |+| 10 | SEG3/KS3 | output | Muxed LED segment output SEG3 / key-scan drive line KS3. P-channel open-drain. |+| 11 | SEG4/KS4 | output | Muxed LED segment output SEG4 / key-scan drive line KS4. P-channel open-drain. |+| 12 | SEG5/KS5 | output | Muxed LED segment output SEG5 / key-scan drive line KS5. P-channel open-drain. |+| 13 | SEG6/KS6 | output | Muxed LED segment output SEG6 / key-scan drive line KS6. P-channel open-drain. |+| 14 | SEG7/KS7 | output | Muxed LED segment output SEG7 / key-scan drive line KS7. P-channel open-drain. |+| 15 | SEG8/KS8 | output | Muxed LED segment output SEG8 / key-scan drive line KS8. P-channel open-drain. |+| 16 | SEG9/KS9 | output | Muxed LED segment output SEG9 / key-scan drive line KS9. P-channel open-drain. |+| 17 | SEG10/KS10 | output | Muxed LED segment output SEG10 / key-scan drive line KS10. P-channel open-drain. |+| 18 | SEG12/GRID7 | output | Muxed segment SEG12 / grid (digit) driver GRID7. Push-pull (P/N) open-drain output; role depends on the display-mode command (4/13, 5/12, 6/11 or 7/10 grid/segment). |+| 19 | SEG13/GRID6 | output | Muxed segment SEG13 / grid driver GRID6. Push-pull (P/N) open-drain output. |+| 20 | SEG14/GRID5 | output | Muxed segment SEG14 / grid driver GRID5. Push-pull (P/N) open-drain output. |+| 21 | VDD | power_in | Positive supply (tied to pin 7). 3.0-5.5 V. Both VDD pins should be connected to the same rail with local decoupling. |+| 22 | GND | power_in | Ground return. All three GND pins (22, 25, 28) must be tied to the board 0 V plane. |+| 23 | GRID4 | output | Digit (grid) driver 4. N-channel open-drain sink, IOL 100 mA typ at VO = 0.3 V; strobes the common cathode of digit 4 during display refresh. |+| 24 | GRID3 | output | Digit (grid) driver 3. N-channel open-drain sink. |+| 25 | GND | power_in | Ground return (see pin 22). |+| 26 | GRID2 | output | Digit (grid) driver 2. N-channel open-drain sink. |+| 27 | GRID1 | output | Digit (grid) driver 1. N-channel open-drain sink. |+| 28 | GND | power_in | Ground return (see pin 22). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | GN Semic |+| Package | SSOP-28-150mil |+| Category | LED-drv |+| Pins | 28 |++## Ordering variants++- `GN1628T`++## CAD (KiCad official)++- Symbol: `GN1628T`+- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`+- 3D model: SSOP-28-150mil (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [GN Semic datasheet](docs/gn1628t-datasheet.pdf) (15 pp, sha256 `d96ca73eb1d02e82`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/gn1628t-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "gn1628t",+ "version": "0.1.0",+ "type": "component",+ "description": "GN Semic LED Display Drivers, SSOP-28-150mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "led-drv",+ "gn1628t"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "gn1628t.kicad_sym",+ "gn1628t.kicad_mod",+ "gn1628t.glb",+ "gn1628t.step",+ "gn1628t.lbr",+ "docs/hero.png",+ "docs/gn1628t-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}