← Commit history
README.mdadded+71@@ -0,0 +1,71 @@+# GN1628++**GN Semic** · Digital Tube Drivers · SOP-28-300mil++GN1628 from GN Semic, in a SOP-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | NC | unconnected | No connection. Leave floating. |+| 2 | DIO | bidirectional | Serial data I/O. N-channel open-drain output with internal ~24kΩ pull-up. Carries display data written into the chip and key-scan data read out over the 3-wire serial interface. |+| 3 | CLK | input | Serial clock input for the 3-wire interface. Data is clocked on the CLK edges relative to STB. Max clock 1 MHz. |+| 4 | STB | input | Chip-select / strobe input. Falling edge starts a command frame; rising edge ends it and latches data. |+| 5 | K1 | input | Key-scan return input line 1 of the 10x2 key matrix. Internal ~10kΩ pull-down (RL). Sampled against KS1..KS10 during key-read frames. |+| 6 | K2 | input | Key-scan return input line 2 of the 10x2 key matrix. Internal ~10kΩ pull-down (RL). Sampled against KS1..KS10 during key-read frames. |+| 7 | VDD | power_in | Positive supply. Operating range 3.0 V to 5.5 V, typical 5 V. Tied to pin 21 (both VDD). |+| 8 | SEG1/KS1 | output | Muxed LED segment 1 output / key-scan drive 1. P-channel open-drain output; sources segment current when driving the display and drives the key-scan strobe otherwise. |+| 9 | SEG2/KS2 | output | Muxed LED segment 2 output / key-scan drive 2. P-channel open-drain. |+| 10 | SEG3/KS3 | output | Muxed LED segment 3 output / key-scan drive 3. P-channel open-drain. |+| 11 | SEG4/KS4 | output | Muxed LED segment 4 output / key-scan drive 4. P-channel open-drain. |+| 12 | SEG5/KS5 | output | Muxed LED segment 5 output / key-scan drive 5. P-channel open-drain. |+| 13 | SEG6/KS6 | output | Muxed LED segment 6 output / key-scan drive 6. P-channel open-drain. |+| 14 | SEG7/KS7 | output | Muxed LED segment 7 output / key-scan drive 7. P-channel open-drain. |+| 15 | SEG8/KS8 | output | Muxed LED segment 8 output / key-scan drive 8. P-channel open-drain. |+| 16 | SEG9/KS9 | output | Muxed LED segment 9 output / key-scan drive 9. P-channel open-drain. |+| 17 | SEG10/KS10 | output | Muxed LED segment 10 output / key-scan drive 10. P-channel open-drain. |+| 18 | SEG12/GRID7 | output | Muxed segment 12 / grid 7 output. P/N open-drain output; role selected by display-mode command (e.g. 4-digit x 13-seg vs 7-digit x 10-seg). |+| 19 | SEG13/GRID6 | output | Muxed segment 13 / grid 6 output. P/N open-drain. Role selected by display mode. |+| 20 | SEG14/GRID5 | output | Muxed segment 14 / grid 5 output. P/N open-drain. Role selected by display mode. |+| 21 | VDD | power_in | Positive supply (second VDD pin, tied internally with pin 7). 3.0-5.5 V. |+| 22 | GND | power_in | Ground reference (0 V). Bonded together with pins 25 and 28. |+| 23 | GRID4 | output | Grid (digit) drive output 4. N-channel open-drain sink used to enable one common of the LED matrix (up to +150 mA sink capability, typ IOL1 = 100 mA at VO = 0.3 V). |+| 24 | GRID3 | output | Grid (digit) drive output 3. N-channel open-drain sink. |+| 25 | GND | power_in | Ground reference (0 V). Bonded with pins 22 and 28. |+| 26 | GRID2 | output | Grid (digit) drive output 2. N-channel open-drain sink. |+| 27 | GRID1 | output | Grid (digit) drive output 1. N-channel open-drain sink. |+| 28 | GND | power_in | Ground reference (0 V). Bonded with pins 22 and 25. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | GN Semic |+| Package | SOP-28-300mil |+| Category | LED Drivers |+| Pins | 28 |++## Ordering variants++Same part, different packaging or reel option.++- `GN1628`+- `GN1628T`++## CAD (KiCad official)++- Symbol: `GN1628`+- Footprint: `Package_SO:SOP-28_8.4x18.16mm_P1.27mm`+- 3D model: SOP-28-300mil (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [GN Semic datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590225294436577280) (15 pp, sha256 `595f9105e69603ac`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/gn1628-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "gn1628",+ "version": "0.1.0",+ "type": "component",+ "description": "GN Semic Digital Tube Drivers, SOP-28-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "led drivers",+ "gn1628"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "gn1628.kicad_sym",+ "gn1628.kicad_mod",+ "gn1628.glb",+ "gn1628.step",+ "gn1628.lbr",+ "docs/hero.png",+ "docs/gn1628-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}