component
GM3232ENA
Public Made by Adomby adom
GATEMODE RS232 ICs, SSOP-16. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.md+14@@ -47,6 +47,20 @@ GM3232ENA from GATEMODE, in a SSOP-16. Pinout and pin descriptions extracted fro - Footprint: `Package_SO:SSOP-16_5.3x6.2mm_P0.65mm` - 3D model: SSOP-16 (KiCad packages3D, STEP) +## 3D model downloads++Two STEP files. Same geometry, different body top:++| File | Size | Use it when |+|---|---|---|+| [`gm3232ena.step`](gm3232ena.step) | 217 KB | You want the bare part, or you mark your own boards. |+| [`gm3232ena-etched.step`](gm3232ena-etched.step) | 2.4 MB | You want the part with `GM3232ENA` already on it. |++The marking in the etched file is real recessed geometry cut into the solid, not a+texture or a decal: 599 faces against 267 in the bare model. It+survives export, section views, and rendering in any CAD tool, and it drops straight+into KiCad or Fusion with no extra setup.+ ## Provenance Data extracted from the manufacturer datasheet, not a distributor listing:
package.json+1−1@@ -1,6 +1,6 @@ { "slug": "gm3232ena",- "version": "0.1.0",+ "version": "0.2.0", "type": "component", "description": "GATEMODE RS232 ICs, SSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [
page.json+18−18@@ -4,7 +4,7 @@ "slug": "gm3232ena", "title": "GM3232ENA", "brief": "GATEMODE RS232 ICs, SSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.2.0", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -34,13 +34,13 @@ "number": "1", "name": "C1+", "type": "passive",- "description": "Positive end of the voltage-doubler charge-pump capacitor C1. Connect an external flying capacitor (0.1\u00b5F typical at 3.3V, 0.047\u00b5F at 5V) between C1+ (pin 1) and C1- (pin 3)."+ "description": "Positive end of the voltage-doubler charge-pump capacitor C1. Connect an external flying capacitor (0.1µF typical at 3.3V, 0.047µF at 5V) between C1+ (pin 1) and C1- (pin 3)." }, { "number": "2", "name": "V+", "type": "power_out",- "description": "Positive voltage produced by the internal charge pump (approximately +2\u00d7VCC). Bypass to GND with a reservoir capacitor (0.1\u00b5F to 0.47\u00b5F depending on VCC). Absolute max +7V; V+ to V- difference must not exceed 13V."+ "description": "Positive voltage produced by the internal charge pump (approximately +2×VCC). Bypass to GND with a reservoir capacitor (0.1µF to 0.47µF depending on VCC). Absolute max +7V; V+ to V- difference must not exceed 13V." }, { "number": "3",@@ -52,7 +52,7 @@ "number": "4", "name": "C2+", "type": "passive",- "description": "Positive end of the inverting charge-pump flying capacitor C2. Connect an external cap (0.1\u00b5F to 0.33\u00b5F depending on VCC) between C2+ (pin 4) and C2- (pin 5)."+ "description": "Positive end of the inverting charge-pump flying capacitor C2. Connect an external cap (0.1µF to 0.33µF depending on VCC) between C2+ (pin 4) and C2- (pin 5)." }, { "number": "5",@@ -64,55 +64,55 @@ "number": "6", "name": "V-", "type": "power_out",- "description": "Negative voltage generated by the internal inverting charge pump (approximately -2\u00d7VCC). Bypass to GND with a reservoir capacitor. Absolute max -7V; V+ to V- difference must not exceed 13V."+ "description": "Negative voltage generated by the internal inverting charge pump (approximately -2×VCC). Bypass to GND with a reservoir capacitor. Absolute max -7V; V+ to V- difference must not exceed 13V." }, { "number": "7", "name": "DOUT2", "type": "output",- "description": "RS-232 driver output for channel 2. Swings between V+ and V- to drive an RS-232 line. Short-circuit protected to GND (Ios \u00b160 mA typ). ESD-protected to \u00b115 kV HBM / IEC 61000-4-2 air discharge."+ "description": "RS-232 driver output for channel 2. Swings between V+ and V- to drive an RS-232 line. Short-circuit protected to GND (Ios ±60 mA typ). ESD-protected to ±15 kV HBM / IEC 61000-4-2 air discharge." }, { "number": "8", "name": "RIN2", "type": "input",- "description": "RS-232 receiver input for channel 2. Accepts \u00b125V RS-232 line levels via a built-in 5 k\u03a9 (3-7 k\u03a9) input resistance to ground. ESD-protected to \u00b115 kV HBM."+ "description": "RS-232 receiver input for channel 2. Accepts ±25V RS-232 line levels via a built-in 5 kΩ (3-7 kΩ) input resistance to ground. ESD-protected to ±15 kV HBM." }, { "number": "9", "name": "ROUT2", "type": "output",- "description": "TTL/CMOS receiver output for channel 2. Drives VCC-referenced logic (VOH \u2265 VCC-0.6 at -1 mA, VOL \u2264 0.4 mV at 1.6 mA). Output goes high when RIN2 is open-circuit."+ "description": "TTL/CMOS receiver output for channel 2. Drives VCC-referenced logic (VOH ≥ VCC-0.6 at -1 mA, VOL ≤ 0.4 mV at 1.6 mA). Output goes high when RIN2 is open-circuit." }, { "number": "10", "name": "DIN2", "type": "input",- "description": "TTL/CMOS driver input for channel 2. VIH \u2265 2.0V (VCC=3.3V) or 2.4V (VCC=5V); VIL \u2264 0.8V. Inverted through the driver to DOUT2."+ "description": "TTL/CMOS driver input for channel 2. VIH ≥ 2.0V (VCC=3.3V) or 2.4V (VCC=5V); VIL ≤ 0.8V. Inverted through the driver to DOUT2." }, { "number": "11", "name": "DIN1", "type": "input",- "description": "TTL/CMOS driver input for channel 1. VIH \u2265 2.0V (VCC=3.3V) or 2.4V (VCC=5V); VIL \u2264 0.8V. Inverted through the driver to DOUT1."+ "description": "TTL/CMOS driver input for channel 1. VIH ≥ 2.0V (VCC=3.3V) or 2.4V (VCC=5V); VIL ≤ 0.8V. Inverted through the driver to DOUT1." }, { "number": "12", "name": "ROUT1", "type": "output",- "description": "TTL/CMOS receiver output for channel 1. Drives VCC-referenced logic (VOH \u2265 VCC-0.6 at -1 mA, VOL \u2264 0.4 mV at 1.6 mA). Output goes high when RIN1 is open-circuit."+ "description": "TTL/CMOS receiver output for channel 1. Drives VCC-referenced logic (VOH ≥ VCC-0.6 at -1 mA, VOL ≤ 0.4 mV at 1.6 mA). Output goes high when RIN1 is open-circuit." }, { "number": "13", "name": "RIN1", "type": "input",- "description": "RS-232 receiver input for channel 1. Accepts \u00b125V RS-232 line levels via a built-in 5 k\u03a9 (3-7 k\u03a9) input resistance to ground. ESD-protected to \u00b115 kV HBM."+ "description": "RS-232 receiver input for channel 1. Accepts ±25V RS-232 line levels via a built-in 5 kΩ (3-7 kΩ) input resistance to ground. ESD-protected to ±15 kV HBM." }, { "number": "14", "name": "DOUT1", "type": "output",- "description": "RS-232 driver output for channel 1. Swings between V+ and V- to drive an RS-232 line. Short-circuit protected to GND (Ios \u00b160 mA typ). ESD-protected to \u00b115 kV HBM / IEC 61000-4-2 air discharge."+ "description": "RS-232 driver output for channel 1. Swings between V+ and V- to drive an RS-232 line. Short-circuit protected to GND (Ios ±60 mA typ). ESD-protected to ±15 kV HBM / IEC 61000-4-2 air discharge." }, { "number": "15",@@ -124,7 +124,7 @@ "number": "16", "name": "VCC", "type": "power_in",- "description": "+3.0V to +5.5V single-supply input (absolute max +6V). Bypass to GND with a 1\u00b5F ceramic capacitor placed close to the pin. Typical supply current ICC = 0.3 mA (no load)."+ "description": "+3.0V to +5.5V single-supply input (absolute max +6V). Bypass to GND with a 1µF ceramic capacitor placed close to the pin. Typical supply current ICC = 0.3 mA (no load)." } ], "provenance": {@@ -198,9 +198,9 @@ "docs/hero.png", "docs/gm3232ena-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "pads.json" ],- "visibility": {- "public": true- }+ "visibility": "public",+ "description": "GATEMODE RS232 ICs, SSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D." }