← Commit history
page.json+13−10@@ -38,7 +38,7 @@ "number": "2", "name": "V+", "type": "power_out",- "description": "Positive voltage produced by the internal charge pump (approximately +2\u00d7VCC). Bypass to GND with a reservoir capacitor (0.1\u00b5F typ, 0.33\u00b5F at 5V VCC)."+ "description": "Positive voltage produced by the internal charge pump (approximately +2×VCC). Bypass to GND with a reservoir capacitor (0.1µF typ, 0.33µF at 5V VCC)." }, { "number": "3",@@ -62,19 +62,19 @@ "number": "6", "name": "V-", "type": "power_out",- "description": "Negative voltage generated by the internal inverting charge pump (approximately -2\u00d7VCC). Bypass to GND with a reservoir capacitor (0.1\u00b5F typ, 0.33\u00b5F at 5V VCC)."+ "description": "Negative voltage generated by the internal inverting charge pump (approximately -2×VCC). Bypass to GND with a reservoir capacitor (0.1µF typ, 0.33µF at 5V VCC)." }, { "number": "7", "name": "DOUT2", "type": "output",- "description": "RS-232 driver output for channel 2. Swings between V+ and V- (typ \u00b15V) to drive an RS-232 line. Short-circuit protected to ground."+ "description": "RS-232 driver output for channel 2. Swings between V+ and V- (typ ±5V) to drive an RS-232 line. Short-circuit protected to ground." }, { "number": "8", "name": "RIN2", "type": "input",- "description": "RS-232 receiver input for channel 2. Accepts \u00b125V RS-232 signals with a standard built-in ~5k\u03a9 input load resistor. Thresholds ~1.5V typ (VIT+) / ~1.1V typ (VIT-)."+ "description": "RS-232 receiver input for channel 2. Accepts ±25V RS-232 signals with a standard built-in ~5kΩ input load resistor. Thresholds ~1.5V typ (VIT+) / ~1.1V typ (VIT-)." }, { "number": "9",@@ -86,13 +86,13 @@ "number": "10", "name": "DIN2", "type": "input",- "description": "TTL/CMOS driver input for channel 2. VIH \u2265 2.0V (VCC=3.3V) / 2.4V (VCC=5V); VIL \u2264 0.8V. Inverted through the driver to DOUT2."+ "description": "TTL/CMOS driver input for channel 2. VIH ≥ 2.0V (VCC=3.3V) / 2.4V (VCC=5V); VIL ≤ 0.8V. Inverted through the driver to DOUT2." }, { "number": "11", "name": "DIN1", "type": "input",- "description": "TTL/CMOS driver input for channel 1. VIH \u2265 2.0V (VCC=3.3V) / 2.4V (VCC=5V); VIL \u2264 0.8V. Inverted through the driver to DOUT1."+ "description": "TTL/CMOS driver input for channel 1. VIH ≥ 2.0V (VCC=3.3V) / 2.4V (VCC=5V); VIL ≤ 0.8V. Inverted through the driver to DOUT1." }, { "number": "12",@@ -104,13 +104,13 @@ "number": "13", "name": "RIN1", "type": "input",- "description": "RS-232 receiver input for channel 1. Accepts \u00b125V RS-232 signals with a standard built-in ~5k\u03a9 input load resistor. Thresholds ~1.5V typ (VIT+) / ~1.1V typ (VIT-)."+ "description": "RS-232 receiver input for channel 1. Accepts ±25V RS-232 signals with a standard built-in ~5kΩ input load resistor. Thresholds ~1.5V typ (VIT+) / ~1.1V typ (VIT-)." }, { "number": "14", "name": "DOUT1", "type": "output",- "description": "RS-232 driver output for channel 1. Swings between V+ and V- (typ \u00b15V) to drive an RS-232 line. Short-circuit protected to ground."+ "description": "RS-232 driver output for channel 1. Swings between V+ and V- (typ ±5V) to drive an RS-232 line. Short-circuit protected to ground." }, { "number": "15",@@ -122,7 +122,7 @@ "number": "16", "name": "VCC", "type": "power_in",- "description": "+3.0V to +5.5V power supply input. Bypass with a 1\u00b5F (typ) capacitor to GND close to the pin. Absolute maximum +6V."+ "description": "+3.0V to +5.5V power supply input. Bypass with a 1µF (typ) capacitor to GND close to the pin. Absolute maximum +6V." } ], "provenance": {@@ -204,5 +204,8 @@ "docs/gm3232eba-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }