← Commit history

gm1200acpz: factory component page (tier=lcsc)

Ray ·8e568d61f7 · ·parent 02a0253
1 file changed +134−8
page.json+134−8
@@ -1,13 +1,144 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "gm1200acpz",+  "title": "GM1200ACPZ",+  "brief": "GONGMOSEMI Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, DFN-10(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "GONGMOSEMI Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, DFN-10(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",     "gm1200acpz"   ],+  "component": {+    "mpn": "GM1200ACPZ",+    "manufacturer": "GONGMOSEMI",+    "package": "DFN-10(3x3)",+    "pin_count": 11,+    "category": "PMIC",+    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2405211625_GONGMOSEMI-GM1200ACPZ_C2928233.pdf",+    "parts": {+      "symbol": "gm1200acpz.kicad_sym",+      "footprint": "gm1200acpz.kicad_mod",+      "model_3d": "gm1200acpz.glb",+      "model_3d_step": "gm1200acpz.step",+      "lbr": "gm1200acpz.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "IN",+        "type": "power_in",+        "description": "Regulator supply input. Pins 1 and 2 are tied together internally to IN. Requires a typical 4.7\u00b5F bypass capacitor; large load transients need more input capacitance to prevent supply droop. Input range 2.6V to 20V."+      },+      {+        "number": "2",+        "name": "IN",+        "type": "power_in",+        "description": "Regulator supply input, paralleled with pin 1. Requires 4.7\u00b5F typical bypass capacitor."+      },+      {+        "number": "3",+        "name": "EN/UV",+        "type": "input",+        "description": "Enable / undervoltage-lockout input. Pulling EN/UV low (<1\u00b5A quiescent) places the device in shutdown. A resistor divider between IN, EN/UV, and GND sets a programmable UVLO threshold; rising threshold typically 1.07V with 100mV hysteresis. Tie to IN if not used; do not leave floating."+      },+      {+        "number": "4",+        "name": "PG",+        "type": "output",+        "description": "Power-good open-drain output. Asserts high (Hi-Z) when PGFB > 302mV, indicating output regulation is within spec. Leave floating if power-good indication is not needed."+      },+      {+        "number": "5",+        "name": "ILIM",+        "type": "passive",+        "description": "Programmable current-limit input. A resistor from ILIM to GND (Kelvin-connected to the GM1200 GND pin) sets the current limit; programming scale factor is typically 128mA\u00b7k\u03a9. May also serve as a 0V-to-300mV current-monitor output. Tie to GND if programmable limit is not needed."+      },+      {+        "number": "6",+        "name": "PGFB",+        "type": "input",+        "description": "Power-good feedback input. PG asserts when PGFB rises above 302mV, with 60mV falling hysteresis. External divider between OUT, PGFB, and GND programs the power-good threshold: VPG_thr = 0.305V\u00b7(1 + RPG2/RPG1). PGFB also enables the fast-start-up circuit. Tie to IN if power-good and fast-start are not needed."+      },+      {+        "number": "7",+        "name": "SET",+        "type": "input",+        "description": "Output-voltage setpoint. Inverting input of the error amplifier. Sources a precise 100\u00b5A reference current through an external RSET between SET and GND: VOUT = ISET\u00b7RSET (adjustable 1.5V to 15V). Adding a capacitor from SET to GND reduces output noise, PSRR ripple, and improves transient response at the cost of longer startup. Use Kelvin connection of the RSET ground to the load return for best load regulation."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground. The DFN exposed pad (pin 11) must be soldered to the PCB GND plane and connected directly to this pin for proper electrical and thermal performance."+      },+      {+        "number": "9",+        "name": "OUTS",+        "type": "input",+        "description": "Output sense; non-inverting input of the error amplifier. For best transient response and load regulation, Kelvin-connect OUTS directly to the output capacitor and the load. Route the input/output capacitor GND returns near this pin."+      },+      {+        "number": "10",+        "name": "OUT",+        "type": "power_out",+        "description": "Regulated output; supplies load current up to 200mA. Requires a minimum 4.7\u00b5F ceramic output capacitor with ESR < 50m\u03a9 and ESL < 2nH for stability. Larger load transients require more output capacitance to limit peak deviation."+      },+      {+        "number": "11",+        "name": "GND (EPAD)",+        "type": "power_in",+        "description": "Exposed thermal pad on the DFN package bottom. Must be soldered directly to a PCB ground plane for proper electrical and thermal performance and connected to pin 8."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2405211625_GONGMOSEMI-GM1200ACPZ_C2928233.pdf",+        "pages": 16,+        "sha256": "f11e08b838cc3a46",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 11,+        "described": 11,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "GONGMOSEMI",+      "Package": "DFN-10(3x3)",+      "Category": "PMIC",+      "Pins": "11"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "gm1200acpz"+  ],+  "discovery_pitch": "GM1200ACPZ (GONGMOSEMI) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +156,5 @@     "docs/gm1200acpz-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file