component
GD5F1GQ5REYIGR
Public Made by Adomby adom
GigaDevice Semicon Beijing NAND FLASH, WSON-8-EP(6x8). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+45@@ -0,0 +1,45 @@+# GD5F1GQ5REYIGR++**GigaDevice Semicon Beijing** · NAND FLASH · WSON-8-EP(6x8)++GD5F1GQ5REYIGR from GigaDevice Semicon Beijing, in a WSON-8-EP(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CS# | input | Chip Select input, active low; device enters idle state when CS# is HIGH; recommended to pull HIGH when SPI flash is not in use to avoid device remaining in read state. |+| 2 | SO/SIO1 | bidirectional | Serial Data Output in Standard SPI mode; Serial Data Input Output 1 (bidirectional) in Dual SPI (3BH/BBH) and Quad SPI (6BH/EBH/EEH) modes. |+| 3 | WP#/SIO2 | bidirectional | Write Protect input, active low; when BRWD=1 and WP# is LOW the block protect bits and Protection register (A0H) cannot be changed; functions as Serial Data Input Output 2 in Quad SPI mode when QE=1. |+| 4 | VSS | power_in | Ground reference for all internal circuitry; 0 V. |+| 5 | HOLD#/SIO3 | bidirectional | Hold input, active low, suspends serial communications while CS# is held low without aborting an in-progress write, program, or erase; available only when QE=0; functions as Serial Data Input Output 3 in Quad SPI mode when QE=1. |+| 6 | SI/SIO0 | bidirectional | Serial Data Input in Standard SPI mode, data latched on rising edge of SCLK; Serial Data Input Output 0 (bidirectional) in Dual and Quad SPI modes. |+| 7 | SCLK | input | Serial Clock input; supports CPOL=0/CPHA=0 (Mode 0) and CPOL=1/CPHA=1 (Mode 3); maximum frequency 133 MHz at 3.3 V (30 pF load), 104 MHz at 1.8 V (30 pF load). |+| 8 | VCC | power_in | Power Supply; 1.7 V to 2.0 V for R (1.8 V) variant; 30 mA maximum active current (read/program/erase), 50 µA maximum standby current. |+| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | GigaDevice Semicon Beijing |+| Package | WSON-8-EP(6x8) |+| Category | Memory |+| Pins | 9 |++## CAD (KiCad official)++- Symbol: `GD5F1GQ5REYIGR`+- Footprint: `Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm`+- 3D model: WSON-8-EP(6x8), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)+- 3D model files: `gd5f1gq5reyigr-etched.step` / `gd5f1gq5reyigr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `gd5f1gq5reyigr.step` / `gd5f1gq5reyigr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [GigaDevice Semicon Beijing datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589042092094205952) (64 pp, sha256 `404058e4ae70989a`, retrieved 2026-10-01, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/gd5f1gq5reyigr-datasheet.pdf)
page.jsonadded+163@@ -0,0 +1,163 @@+{+ "slug": "gd5f1gq5reyigr",+ "version": "0.1.0",+ "type": "component",+ "description": "GigaDevice Semicon Beijing NAND FLASH, WSON-8-EP(6x8). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "memory",+ "gd5f1gq5reyigr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "gd5f1gq5reyigr.kicad_sym",+ "gd5f1gq5reyigr.kicad_mod",+ "gd5f1gq5reyigr.glb",+ "gd5f1gq5reyigr.step",+ "gd5f1gq5reyigr.lbr",+ "docs/hero.png",+ "docs/gd5f1gq5reyigr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "GD5F1GQ5REYIGR",+ "manufacturer": "GigaDevice Semicon Beijing",+ "package": "WSON-8-EP(6x8)",+ "pin_count": 9,+ "category": "Memory",+ "subcategory": "NAND FLASH",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589042092094205952",+ "parts": {+ "symbol": "gd5f1gq5reyigr.kicad_sym",+ "footprint": "gd5f1gq5reyigr.kicad_mod",+ "model_3d": "gd5f1gq5reyigr-etched.glb",+ "model_3d_plain": "gd5f1gq5reyigr.glb",+ "model_3d_step": "gd5f1gq5reyigr-etched.step",+ "model_3d_step_plain": "gd5f1gq5reyigr.step",+ "lbr": "gd5f1gq5reyigr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2927042",+ "digikey": "1970-GD5F1GQ5REYIGRTR-ND",+ "mouser": "363-GD5F1GQ5REYIGR"+ },+ "distributor_check": {+ "checked_at": "2026-10-01T17:23:39Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "1970-GD5F1GQ5REYIGRTR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "363-GD5F1GQ5REYIGR",+ "status": "found",+ "lifecycle": "New Product"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "CS#",+ "type": "input",+ "description": "Chip Select input, active low; device enters idle state when CS# is HIGH; recommended to pull HIGH when SPI flash is not in use to avoid device remaining in read state."+ },+ {+ "number": "2",+ "name": "SO/SIO1",+ "type": "bidirectional",+ "description": "Serial Data Output in Standard SPI mode; Serial Data Input Output 1 (bidirectional) in Dual SPI (3BH/BBH) and Quad SPI (6BH/EBH/EEH) modes."+ },+ {+ "number": "3",+ "name": "WP#/SIO2",+ "type": "bidirectional",+ "description": "Write Protect input, active low; when BRWD=1 and WP# is LOW the block protect bits and Protection register (A0H) cannot be changed; functions as Serial Data Input Output 2 in Quad SPI mode when QE=1."+ },+ {+ "number": "4",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground reference for all internal circuitry; 0 V."+ },+ {+ "number": "5",+ "name": "HOLD#/SIO3",+ "type": "bidirectional",+ "description": "Hold input, active low, suspends serial communications while CS# is held low without aborting an in-progress write, program, or erase; available only when QE=0; functions as Serial Data Input Output 3 in Quad SPI mode when QE=1."+ },+ {+ "number": "6",+ "name": "SI/SIO0",+ "type": "bidirectional",+ "description": "Serial Data Input in Standard SPI mode, data latched on rising edge of SCLK; Serial Data Input Output 0 (bidirectional) in Dual and Quad SPI modes."+ },+ {+ "number": "7",+ "name": "SCLK",+ "type": "input",+ "description": "Serial Clock input; supports CPOL=0/CPHA=0 (Mode 0) and CPOL=1/CPHA=1 (Mode 3); maximum frequency 133 MHz at 3.3 V (30 pF load), 104 MHz at 1.8 V (30 pF load)."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Power Supply; 1.7 V to 2.0 V for R (1.8 V) variant; 30 mA maximum active current (read/program/erase), 50 µA maximum standby current."+ },+ {+ "number": "9",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 64,+ "cost_usd": 0.3418,+ "at": "2026-10-01T17:23:18"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589042092094205952",+ "pages": 64,+ "sha256": "404058e4ae70989a",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 9,+ "described": 9,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}