← Commit history
README.mdadded+127@@ -0,0 +1,127 @@+# GD32F303RCT6++**GigaDevice Semicon Beijing** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)++GD32F303RCT6 from GigaDevice Semicon Beijing, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Battery backup supply for RTC and backup registers when VDD is off. Nominal 1.8-3.6 V. |+| 2 | PC13/TAMPER-RTC | bidirectional | General-purpose I/O PC13; alternate function TAMPER-RTC (RTC tamper detect / RTC alarm/second output). Backup-domain pin with limited drive. |+| 3 | PC14/OSC32IN | bidirectional | General-purpose I/O PC14; alternate function OSC32IN input for the 32.768 kHz LXTAL oscillator. |+| 4 | PC15/OSC32OUT | bidirectional | General-purpose I/O PC15; alternate function OSC32OUT output for the 32.768 kHz LXTAL oscillator. |+| 5 | OSCIN | input | HXTAL crystal oscillator input (4-32 MHz) or external clock input. Can be remapped as PD0. |+| 6 | OSCOUT | output | HXTAL crystal oscillator output. Can be remapped as PD1. |+| 7 | NRST | bidirectional | Bidirectional active-low system reset. Internal pull-up; drive low externally to reset. |+| 8 | PC0 | bidirectional | General-purpose I/O PC0; alternate function ADC012_IN10 (ADC0/1/2 channel 10 input). |+| 9 | PC1 | bidirectional | General-purpose I/O PC1; alternate function ADC012_IN11. |+| 10 | PC2 | bidirectional | General-purpose I/O PC2; alternate function ADC012_IN12. |+| 11 | PC3 | bidirectional | General-purpose I/O PC3; alternate function ADC012_IN13. |+| 12 | VSSA | power_in | Analog ground reference for ADC/DAC. Tie to system ground with proper decoupling. |+| 13 | VDDA | power_in | Analog supply for ADC/DAC and reset block. Nominal 2.6-3.6 V; typically tied to VDD through a ferrite bead with decoupling. |+| 14 | PA0-WKUP | bidirectional | General-purpose I/O PA0 with WKUP wake-up function; alt: USART1_CTS, ADC012_IN0, TIMER1_CH0, TIMER1_ETI, TIMER4_CH0, TIMER7_ETI. |+| 15 | PA1 | bidirectional | General-purpose I/O PA1; alt: USART1_RTS, ADC012_IN1, TIMER1_CH1, TIMER4_CH1. |+| 16 | PA2 | bidirectional | General-purpose I/O PA2; alt: USART1_TX, ADC012_IN2, TIMER1_CH2, TIMER4_CH2, TIMER8_CH0, SPI0_IO2. |+| 17 | PA3 | bidirectional | General-purpose I/O PA3; alt: USART1_RX, ADC012_IN3, TIMER1_CH3, TIMER4_CH3, TIMER8_CH1, SPI0_IO3. |+| 18 | VSS_4 | power_in | Digital ground supply. |+| 19 | VDD_4 | power_in | Digital supply. Nominal 2.6-3.6 V; decouple with 100 nF close to pin. |+| 20 | PA4 | bidirectional | General-purpose I/O PA4; alt: SPI0_NSS, USART1_CK, ADC01_IN4, DAC0_OUT0; remap: SPI2_NSS, I2S2_WS. |+| 21 | PA5 | bidirectional | General-purpose I/O PA5; alt: SPI0_SCK, ADC01_IN5, DAC0_OUT1. |+| 22 | PA6 | bidirectional | General-purpose I/O PA6; alt: SPI0_MISO, ADC01_IN6, TIMER2_CH0, TIMER7_BRKIN, TIMER12_CH0; remap: TIMER0_BRKIN. |+| 23 | PA7 | bidirectional | General-purpose I/O PA7; alt: SPI0_MOSI, ADC01_IN7, TIMER2_CH1, TIMER7_CH0_ON, TIMER13_CH0; remap: TIMER0_CH0_ON. |+| 24 | PC4 | bidirectional | General-purpose I/O PC4; alt: ADC01_IN14. |+| 25 | PC5 | bidirectional | General-purpose I/O PC5; alt: ADC01_IN15. |+| 26 | PB0 | bidirectional | General-purpose I/O PB0; alt: ADC01_IN8, TIMER2_CH2, TIMER7_CH1_ON; remap: TIMER0_CH1_ON. |+| 27 | PB1 | bidirectional | General-purpose I/O PB1; alt: ADC01_IN9, TIMER2_CH3, TIMER7_CH2_ON; remap: TIMER0_CH2_ON. |+| 28 | PB2 | bidirectional | General-purpose I/O PB2 / BOOT1. 5 V tolerant. Sampled at reset with BOOT0 to select boot memory. |+| 29 | PB10 | bidirectional | General-purpose I/O PB10; alt: I2C1_SCL, USART2_TX; remap: TIMER1_CH2. 5 V tolerant. |+| 30 | PB11 | bidirectional | General-purpose I/O PB11; alt: I2C1_SDA, USART2_RX; remap: TIMER1_CH3. 5 V tolerant. |+| 31 | VSS_1 | power_in | Digital ground supply. |+| 32 | VDD_1 | power_in | Digital supply. Nominal 2.6-3.6 V; decouple with 100 nF close to pin. |+| 33 | PB12 | bidirectional | General-purpose I/O PB12; alt: SPI1_NSS, I2C1_SMBA, USART2_CK, TIMER0_BRKIN, I2S1_WS. 5 V tolerant. |+| 34 | PB13 | bidirectional | General-purpose I/O PB13; alt: SPI1_SCK, USART2_CTS, TIMER0_CH0_ON, I2S1_CK. 5 V tolerant. |+| 35 | PB14 | bidirectional | General-purpose I/O PB14; alt: SPI1_MISO, USART2_RTS, TIMER0_CH1_ON, TIMER11_CH0. 5 V tolerant. |+| 36 | PB15 | bidirectional | General-purpose I/O PB15; alt: SPI1_MOSI, TIMER0_CH2_ON, I2S1_SD, TIMER11_CH1. 5 V tolerant. |+| 37 | PC6 | bidirectional | General-purpose I/O PC6; alt: I2S1_MCK, TIMER7_CH0, SDIO_D6; remap: TIMER2_CH0. 5 V tolerant. |+| 38 | PC7 | bidirectional | General-purpose I/O PC7; alt: I2S2_MCK, TIMER7_CH1, SDIO_D7; remap: TIMER2_CH1. 5 V tolerant. |+| 39 | PC8 | bidirectional | General-purpose I/O PC8; alt: TIMER7_CH2, SDIO_D0; remap: TIMER2_CH2. 5 V tolerant. |+| 40 | PC9 | bidirectional | General-purpose I/O PC9; alt: TIMER7_CH3, SDIO_D1; remap: TIMER2_CH3. 5 V tolerant. |+| 41 | PA8 | bidirectional | General-purpose I/O PA8; alt: USART0_CK, TIMER0_CH0, CK_OUT0, CTC_SYNC. 5 V tolerant. |+| 42 | PA9 | bidirectional | General-purpose I/O PA9; alt: USART0_TX, TIMER0_CH1. 5 V tolerant. |+| 43 | PA10 | bidirectional | General-purpose I/O PA10; alt: USART0_RX, TIMER0_CH2. 5 V tolerant. |+| 44 | PA11 | bidirectional | General-purpose I/O PA11; alt: USART0_CTS, CAN0_RX, USBDM, TIMER0_CH3. 5 V tolerant. |+| 45 | PA12 | bidirectional | General-purpose I/O PA12; alt: USART0_RTS, CAN0_TX, TIMER0_ETI, USBDP. 5 V tolerant. |+| 46 | PA13 | bidirectional | JTMS / SWDIO debug pin; remappable to GPIO PA13. 5 V tolerant. |+| 47 | VSS_2 | power_in | Digital ground supply. |+| 48 | VDD_2 | power_in | Digital supply. Nominal 2.6-3.6 V; decouple with 100 nF close to pin. |+| 49 | PA14 | bidirectional | JTCK / SWCLK debug pin; remappable to GPIO PA14. 5 V tolerant. |+| 50 | PA15 | bidirectional | JTDI (default). Alt: SPI2_NSS, I2S2_WS; remap: TIMER1_CH0, TIMER1_ETI, GPIO PA15, SPI0_NSS. 5 V tolerant. |+| 51 | PC10 | bidirectional | General-purpose I/O PC10; alt: UART3_TX, SDIO_D2; remap: USART2_TX, SPI2_SCK, I2S2_CK. 5 V tolerant. |+| 52 | PC11 | bidirectional | General-purpose I/O PC11; alt: UART3_RX, SDIO_D3; remap: USART2_RX, SPI2_MISO. 5 V tolerant. |+| 53 | PC12 | bidirectional | General-purpose I/O PC12; alt: UART4_TX, SDIO_CK; remap: USART2_CK, SPI2_MOSI, I2S2_SD. 5 V tolerant. |+| 54 | PD2 | bidirectional | General-purpose I/O PD2; alt: TIMER2_ETI, SDIO_CMD, UART4_RX. 5 V tolerant. |+| 55 | PB3 | bidirectional | JTDO (default). Alt: SPI2_SCK, I2S2_CK; remap: GPIO PB3, TRACESWO, TIMER1_CH1, SPI0_SCK. 5 V tolerant. |+| 56 | PB4 | bidirectional | NJTRST (default). Alt: SPI2_MISO; remap: TIMER2_CH0, GPIO PB4, SPI0_MISO. 5 V tolerant. |+| 57 | PB5 | bidirectional | General-purpose I/O PB5; alt: I2C0_SMBA, SPI2_MOSI, I2S2_SD; remap: TIMER2_CH1, SPI0_MOSI. 5 V tolerant. |+| 58 | PB6 | bidirectional | General-purpose I/O PB6; alt: I2C0_SCL, TIMER3_CH0; remap: USART0_TX, SPI0_IO2. 5 V tolerant. |+| 59 | PB7 | bidirectional | General-purpose I/O PB7; alt: I2C0_SDA, TIMER3_CH1; remap: USART0_RX, SPI0_IO3. 5 V tolerant. |+| 60 | BOOT0 | input | Boot mode select input, sampled at reset together with BOOT1 to select main Flash / system memory / SRAM boot. |+| 61 | PB8 | bidirectional | General-purpose I/O PB8; alt: TIMER3_CH2, SDIO_D4, TIMER9_CH0; remap: I2C0_SCL, CAN0_RX. 5 V tolerant. |+| 62 | PB9 | bidirectional | General-purpose I/O PB9; alt: TIMER3_CH3, SDIO_D5, TIMER10_CH0; remap: I2C0_SDA, CAN0_TX. 5 V tolerant. |+| 63 | VSS_3 | power_in | Digital ground supply. |+| 64 | VDD_3 | power_in | Digital supply. Nominal 2.6-3.6 V; decouple with 100 nF close to pin. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | GigaDevice Semicon Beijing |+| Package | LQFP-64(10x10) |+| Category | MCU |+| Pins | 64 |++## Ordering variants++- `GD32F303RCT6RKT6`+- `GD32F303RCT6RIT6`+- `GD32F303RCT6RGT6`+- `GD32F303RCT6RET6`+- `GD32F303RCT6RET7`+- `GD32F303RCT6`+- `GD32F303RCT6RCT7`+- `GD32F303RCT6ZKT6`+- `GD32F303RCT6ZIT6`+- `GD32F303RCT6ZGT6`+- `GD32F303RCT6ZET6`+- `GD32F303RCT6ZCT6`+- `GD32F303RCT6VKT6`+- `GD32F303RCT6VIT6`+- `GD32F303RCT6VGT6`+- `GD32F303RCT6VGT7`+- `GD32F303RCT6VET6`+- `GD32F303RCT6VET7`+- `GD32F303RCT6VCT6`+- `GD32F303RCT6CGT6`+- `GD32F303RCT6CET6`+- `GD32F303RCT6CCT6`+- `GD32F303RCT6CCT7`+- `GD32F303RCT6CCU6`+- `GD32F303RCT6CCU7`++## CAD (KiCad official)++- Symbol: `GD32F303RCT6`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [GigaDevice Semicon Beijing datasheet](docs/gd32f303rct6-datasheet.pdf) (103 pp, sha256 `df6b797095a9416e`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/gd32f303rct6-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "gd32f303rct6",+ "version": "0.1.0",+ "type": "component",+ "description": "GigaDevice Semicon Beijing Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "mcu",+ "gd32f303rct6"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "gd32f303rct6.kicad_sym",+ "gd32f303rct6.kicad_mod",+ "gd32f303rct6.glb",+ "gd32f303rct6.step",+ "gd32f303rct6.lbr",+ "docs/hero.png",+ "docs/gd32f303rct6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}