← Commit history
README.mdadded+123@@ -0,0 +1,123 @@+# GD32F103CBT6++**GigaDevice Semicon Beijing** · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)++GD32F103CBT6 from GigaDevice Semicon Beijing, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Battery/backup power supply for RTC and backup registers when VDD is off. |+| 2 | PC13/TAMPER-RTC | bidirectional | General-purpose I/O PC13; alternate function TAMPER-RTC (tamper detection / RTC output). |+| 3 | PC14/OSC32IN | bidirectional | General-purpose I/O PC14; alternate function OSC32IN input for the 32.768 kHz LXTAL crystal. |+| 4 | PC15/OSC32OUT | bidirectional | General-purpose I/O PC15; alternate function OSC32OUT for the 32.768 kHz LXTAL crystal. |+| 5 | OSCIN | input | High-speed external oscillator input (HXTAL crystal input, or external clock in bypass mode). |+| 6 | OSCOUT | output | High-speed external oscillator output (HXTAL crystal drive). |+| 7 | NRST | bidirectional | Bidirectional active-low device reset input/output with internal pull-up. |+| 8 | VSSA | power_in | Analog ground reference for ADC, DAC, and analog supply return. |+| 9 | VDDA | power_in | Analog supply (2.6-3.6 V) for ADC, DAC, and reset block; must be tied to VDD range. |+| 10 | PA0/WKUP | bidirectional | General-purpose I/O PA0; alternates: WKUP wake-up, USART1_CTS, ADC012_IN0, TIMER1_CH0, TIMER1_ETI. |+| 11 | PA1 | bidirectional | General-purpose I/O PA1; alternates: USART1_RTS, ADC012_IN1, TIMER1_CH1. |+| 12 | PA2 | bidirectional | General-purpose I/O PA2; alternates: USART1_TX, ADC012_IN2, TIMER1_CH2. |+| 13 | PA3 | bidirectional | General-purpose I/O PA3; alternates: USART1_RX, ADC012_IN3, TIMER1_CH3. |+| 14 | PA4 | bidirectional | General-purpose I/O PA4; alternates: SPI0_NSS, USART1_CK, ADC01_IN4. |+| 15 | PA5 | bidirectional | General-purpose I/O PA5; alternates: SPI0_SCK, ADC01_IN5. |+| 16 | PA6 | bidirectional | General-purpose I/O PA6; alternates: SPI0_MISO, ADC01_IN6, TIMER2_CH0; remap TIMER0_BRKIN. |+| 17 | PA7 | bidirectional | General-purpose I/O PA7; alternates: SPI0_MOSI, ADC01_IN7, TIMER2_CH1; remap TIMER0_CH0_ON. |+| 18 | PB0 | bidirectional | General-purpose I/O PB0; alternates: ADC01_IN8, TIMER2_CH2; remap TIMER0_CH1_ON. |+| 19 | PB1 | bidirectional | General-purpose I/O PB1; alternates: ADC01_IN9, TIMER2_CH3; remap TIMER0_CH2_ON. |+| 20 | PB2/BOOT1 | bidirectional | General-purpose I/O PB2; also serves as BOOT1 boot-mode select strap sampled at reset. |+| 21 | PB10 | bidirectional | General-purpose I/O PB10; alternates: I2C1_SCL, USART2_TX; remap TIMER1_CH2. |+| 22 | PB11 | bidirectional | General-purpose I/O PB11; alternates: I2C1_SDA, USART2_RX; remap TIMER1_CH3. |+| 23 | VSS_1 | power_in | Digital ground return. |+| 24 | VDD_1 | power_in | Digital supply input (2.6-3.6 V). |+| 25 | PB12 | bidirectional | General-purpose I/O PB12; alternates: SPI1_NSS, I2C1_SMBA, USART2_CK, TIMER0_BRKIN. |+| 26 | PB13 | bidirectional | General-purpose I/O PB13; alternates: SPI1_SCK, USART2_CTS, TIMER0_CH0_ON. |+| 27 | PB14 | bidirectional | General-purpose I/O PB14; alternates: SPI1_MISO, USART2_RTS, TIMER0_CH1_ON. |+| 28 | PB15 | bidirectional | General-purpose I/O PB15; alternates: SPI1_MOSI, TIMER0_CH2_ON. |+| 29 | PA8 | bidirectional | General-purpose I/O PA8; alternates: USART0_CK, TIMER0_CH0, CK_OUT0 (MCO). |+| 30 | PA9 | bidirectional | General-purpose I/O PA9; alternates: USART0_TX, TIMER0_CH1. |+| 31 | PA10 | bidirectional | General-purpose I/O PA10; alternates: USART0_RX, TIMER0_CH2. |+| 32 | PA11 | bidirectional | General-purpose I/O PA11; alternates: USART0_CTS, CAN0_RX, USBDM, TIMER0_CH3. |+| 33 | PA12 | bidirectional | General-purpose I/O PA12; alternates: USART0_RTS, CAN0_TX, TIMER0_ETI, USBDP. |+| 34 | PA13/JTMS/SWDIO | bidirectional | Debug pin JTMS (JTAG) / SWDIO (Serial Wire); default is debug function, can be remapped to GPIO PA13. |+| 35 | VSS_2 | power_in | Digital ground return. |+| 36 | VDD_2 | power_in | Digital supply input (2.6-3.6 V). |+| 37 | PA14/JTCK/SWCLK | bidirectional | Debug pin JTCK (JTAG) / SWCLK (Serial Wire); default is debug function, can be remapped to GPIO PA14. |+| 38 | PA15/JTDI | bidirectional | Debug pin JTDI; can be remapped to GPIO PA15 with alt functions TIMER1_CH0, TIMER1_ETI, SPI0_NSS. |+| 39 | PB3/JTDO | bidirectional | Debug pin JTDO; can be remapped to GPIO PB3 with alt functions TIMER1_CH1, SPI0_SCK. |+| 40 | PB4/NJTRST | bidirectional | Debug pin NJTRST (JTAG reset, active low); can be remapped to GPIO PB4 with alt functions TIMER2_CH0, SPI0_MISO. |+| 41 | PB5 | bidirectional | General-purpose I/O PB5; alternates: I2C0_SMBA; remap TIMER2_CH1, SPI0_MOSI. |+| 42 | PB6 | bidirectional | General-purpose I/O PB6; alternates: I2C0_SCL, TIMER3_CH0; remap USART0_TX. |+| 43 | PB7 | bidirectional | General-purpose I/O PB7; alternates: I2C0_SDA, TIMER3_CH1; remap USART0_RX. |+| 44 | BOOT0 | input | Boot-mode select strap sampled at reset (combined with BOOT1/PB2). |+| 45 | PB8 | bidirectional | General-purpose I/O PB8; alternates: TIMER3_CH2; remap I2C0_SCL, CAN0_RX. |+| 46 | PB9 | bidirectional | General-purpose I/O PB9; alternates: TIMER3_CH3; remap I2C0_SDA, CAN0_TX. |+| 47 | VSS_3 | power_in | Digital ground return. |+| 48 | VDD_3 | power_in | Digital supply input (2.6-3.6 V). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | GigaDevice Semicon Beijing |+| Package | LQFP-48(7x7) |+| Category | MCU |+| Pins | 48 |++## Ordering variants++Same part, different packaging or reel option.++- `GD32F103CBT6C4T6`+- `GD32F103CBT6C6T6`+- `GD32F103CBT6C8T6`+- `GD32F103CBT6`+- `GD32F103CBT6T4U6`+- `GD32F103CBT6U6`+- `GD32F103CBT6T8U6`+- `GD32F103CBT6TBU6`+- `GD32F103CBT6R4T6`+- `GD32F103CBT6R6T6`+- `GD32F103CBT6R8T6`+- `GD32F103CBT6RBT6`+- `GD32F103CBT6RCT6`+- `GD32F103CBT6RDT6`+- `GD32F103CBT6RET6`+- `GD32F103CBT6RFT6`+- `GD32F103CBT6RGT6`+- `GD32F103CBT6RIT6`+- `GD32F103CBT6RKT6`+- `GD32F103CBT6V8T6`+- `GD32F103CBT6VBT6`+- `GD32F103CBT6VCT6`+- `GD32F103CBT6VDT6`+- `GD32F103CBT6VET6`+- `GD32F103CBT6VFT6`+- `GD32F103CBT6VGT6`+- `GD32F103CBT6VIT6`+- `GD32F103CBT6VKT6`+- `GD32F103CBT6ZCT6`+- `GD32F103CBT6ZDT6`+- `GD32F103CBT6ZET6`+- `GD32F103CBT6ZFT6`+- `GD32F103CBT6ZGT6`+- `GD32F103CBT6ZIT6`+- `GD32F103CBT6ZKT6`++## CAD (KiCad official)++- Symbol: `GD32F103CBT6`+- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`+- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [GigaDevice Semicon Beijing datasheet](docs/gd32f103cbt6-datasheet.pdf) (112 pp, sha256 `53da1a17a1523e83`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/gd32f103cbt6-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "gd32f103cbt6",+ "version": "0.1.0",+ "type": "component",+ "description": "GigaDevice Semicon Beijing Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "mcu",+ "gd32f103cbt6"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "gd32f103cbt6.kicad_sym",+ "gd32f103cbt6.kicad_mod",+ "gd32f103cbt6.glb",+ "gd32f103cbt6.step",+ "gd32f103cbt6.lbr",+ "docs/hero.png",+ "docs/gd32f103cbt6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}