← Commit history
gd32e230k8u6: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+224−1
page.json+224−1@@ -33,5 +33,228 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "GD32E230K8U6",+ "manufacturer": "GigaDevice Semicon Beijing",+ "package": "QFN-32-EP(5x5)",+ "pin_count": 33,+ "category": "Microcontrollers (MCU/MPU/SOC)",+ "parts": {+ "symbol": "gd32e230k8u6.kicad_sym",+ "footprint": "gd32e230k8u6.kicad_mod",+ "model_3d": "gd32e230k8u6-etched.glb",+ "model_3d_plain": "gd32e230k8u6.glb",+ "model_3d_step": "gd32e230k8u6-etched.step",+ "model_3d_step_plain": "gd32e230k8u6.step",+ "lbr": "gd32e230k8u6.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital supply, 2.6-3.6 V. Bypass with 100 nF close to the pin (share bulk cap with pin 17)."+ },+ {+ "number": "2",+ "name": "PF0/OSCIN",+ "type": "bidirectional",+ "description": "Muxed GPIO PF0 / HXTAL oscillator input (OSCIN) / I2C0_SDA alternate function. 5 V tolerant when used as digital I/O; drive from a crystal or external clock when configured as OSCIN."+ },+ {+ "number": "3",+ "name": "PF1/OSCOUT",+ "type": "bidirectional",+ "description": "Muxed GPIO PF1 / HXTAL oscillator output (OSCOUT) / I2C0_SCL alternate function. 5 V tolerant when used as digital I/O."+ },+ {+ "number": "4",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Active-low system reset, bi-directional open-drain with internal pull-up. Drive low externally to reset the MCU; pulled low internally during a power-on / watchdog / software reset."+ },+ {+ "number": "5",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog supply for ADC and comparator, 2.6-3.6 V. Must be tied to VDD (through a ferrite/filter for best ADC performance) and bypassed with 100 nF + 1 µF."+ },+ {+ "number": "6",+ "name": "PA0/WKUP",+ "type": "bidirectional",+ "description": "General-purpose I/O PA0 with multiple alternate functions: USART0_CTS / USART1_CTS, CMP_OUT, I2C1_SCL; additional analog ADC_IN0, CMP_IM6, RTC_TAMP1, and WKUP0 wake-up source."+ },+ {+ "number": "7",+ "name": "PA1",+ "type": "bidirectional",+ "description": "General-purpose I/O PA1. Alternate: USART0_RTS, USART1_RTS, I2C1_SDA, EVENTOUT, TIMER14_CH0_ON. Additional: ADC_IN1, CMP_IP."+ },+ {+ "number": "8",+ "name": "PA2",+ "type": "bidirectional",+ "description": "General-purpose I/O PA2. Alternate: USART0_TX, USART1_TX, TIMER14_CH0. Additional: ADC_IN2, CMP_IM7."+ },+ {+ "number": "9",+ "name": "PA3",+ "type": "bidirectional",+ "description": "General-purpose I/O PA3. Alternate: USART0_RX, USART1_RX, TIMER14_CH1. Additional: ADC_IN3."+ },+ {+ "number": "10",+ "name": "PA4",+ "type": "bidirectional",+ "description": "General-purpose I/O PA4. Alternate: SPI0_NSS, I2S0_WS, USART0_CK, USART1_CK, TIMER13_CH0, SPI1_NSS. Additional: ADC_IN4, CMP_IM4."+ },+ {+ "number": "11",+ "name": "PA5",+ "type": "bidirectional",+ "description": "General-purpose I/O PA5. Alternate: SPI0_SCK, I2S0_CK. Additional: ADC_IN5, CMP_IM5."+ },+ {+ "number": "12",+ "name": "PA6",+ "type": "bidirectional",+ "description": "General-purpose I/O PA6. Alternate: SPI0_MISO, I2S0_MCK, TIMER2_CH0, TIMER0_BRKIN, TIMER15_CH0, EVENTOUT, CMP_OUT. Additional: ADC_IN6."+ },+ {+ "number": "13",+ "name": "PA7",+ "type": "bidirectional",+ "description": "General-purpose I/O PA7. Alternate: SPI0_MOSI, I2S0_SD, TIMER2_CH1, TIMER13_CH0, TIMER0_CH0_ON, TIMER16_CH0, EVENTOUT. Additional: ADC_IN7."+ },+ {+ "number": "14",+ "name": "PB0",+ "type": "bidirectional",+ "description": "General-purpose I/O PB0. Alternate: TIMER2_CH2, TIMER0_CH1_ON, USART1_RX, EVENTOUT. Additional: ADC_IN8."+ },+ {+ "number": "15",+ "name": "PB1",+ "type": "bidirectional",+ "description": "General-purpose I/O PB1. Alternate: TIMER2_CH3, TIMER13_CH0, TIMER0_CH2_ON, SPI1_SCK. Additional: ADC_IN9."+ },+ {+ "number": "16",+ "name": "PB2",+ "type": "bidirectional",+ "description": "General-purpose I/O PB2. 5 V tolerant. Alternate: TIMER2_ETI."+ },+ {+ "number": "17",+ "name": "VDD",+ "type": "power_in",+ "description": "Second digital supply pin, 2.6-3.6 V. Tie to the same rail as pin 1 and bypass locally with 100 nF."+ },+ {+ "number": "18",+ "name": "PA8",+ "type": "bidirectional",+ "description": "General-purpose I/O PA8. 5 V tolerant. Alternate: USART0_CK, TIMER0_CH0, CK_OUT, USART1_TX, EVENTOUT."+ },+ {+ "number": "19",+ "name": "PA9",+ "type": "bidirectional",+ "description": "General-purpose I/O PA9. 5 V tolerant. Alternate: USART0_TX, TIMER0_CH1, TIMER14_BRKIN, I2C0_SCL, CK_OUT."+ },+ {+ "number": "20",+ "name": "PA10",+ "type": "bidirectional",+ "description": "General-purpose I/O PA10. 5 V tolerant. Alternate: USART0_RX, TIMER0_CH2, TIMER16_BRKIN, I2C0_SDA."+ },+ {+ "number": "21",+ "name": "PA11",+ "type": "bidirectional",+ "description": "General-purpose I/O PA11. 5 V tolerant. Alternate: USART0_CTS, TIMER0_CH3, CMP_OUT, EVENTOUT, SPI1_IO2, I2C0_SMBA, I2C1_SCL."+ },+ {+ "number": "22",+ "name": "PA12",+ "type": "bidirectional",+ "description": "General-purpose I/O PA12. 5 V tolerant. Alternate: USART0_RTS, TIMER0_ETI, EVENTOUT, SPI1_IO3, I2C0_TXFRAME, I2C1_SDA."+ },+ {+ "number": "23",+ "name": "PA13",+ "type": "bidirectional",+ "description": "General-purpose I/O PA13, default assigned to SWDIO (Serial Wire Debug data). 5 V tolerant. Alternate: SWDIO, IFRP_OUT, SPI1_MISO."+ },+ {+ "number": "24",+ "name": "PA14",+ "type": "bidirectional",+ "description": "General-purpose I/O PA14, default assigned to SWCLK (Serial Wire Debug clock). 5 V tolerant. Alternate: USART0_TX, USART1_TX, SWCLK, SPI1_MOSI."+ },+ {+ "number": "25",+ "name": "PA15",+ "type": "bidirectional",+ "description": "General-purpose I/O PA15. 5 V tolerant. Alternate: SPI0_NSS, I2S0_WS, USART0_RX, USART1_RX, SPI1_NSS, EVENTOUT."+ },+ {+ "number": "26",+ "name": "PB3",+ "type": "bidirectional",+ "description": "General-purpose I/O PB3. 5 V tolerant. Alternate: SPI0_SCK, I2S0_CK, EVENTOUT."+ },+ {+ "number": "27",+ "name": "PB4",+ "type": "bidirectional",+ "description": "General-purpose I/O PB4. 5 V tolerant. Alternate: SPI0_MISO, I2S0_MCK, TIMER2_CH0, EVENTOUT, I2C0_TXFRAME, TIMER16_BRKIN."+ },+ {+ "number": "28",+ "name": "PB5",+ "type": "bidirectional",+ "description": "General-purpose I/O PB5. 5 V tolerant. Alternate: SPI0_MOSI, I2S0_SD, I2C0_SMBA, TIMER15_BRKIN, TIMER2_CH1. Additional: WKUP5."+ },+ {+ "number": "29",+ "name": "PB6",+ "type": "bidirectional",+ "description": "General-purpose I/O PB6. 5 V tolerant. Alternate: I2C0_SCL, USART0_TX, TIMER15_CH0_ON."+ },+ {+ "number": "30",+ "name": "PB7",+ "type": "bidirectional",+ "description": "General-purpose I/O PB7. 5 V tolerant. Alternate: I2C0_SDA, USART0_RX, TIMER16_CH0_ON."+ },+ {+ "number": "31",+ "name": "BOOT0",+ "type": "input",+ "description": "Boot mode select input, sampled at reset. Low = boot from main Flash; high = boot from system-memory (built-in bootloader) or SRAM per option bytes. Tie low through a resistor for normal operation."+ },+ {+ "number": "32",+ "name": "PB8",+ "type": "bidirectional",+ "description": "General-purpose I/O PB8. 5 V tolerant. Alternate: I2C0_SCL, TIMER15_CH0."+ },+ {+ "number": "33",+ "name": "EPAD/VSS",+ "type": "power_in",+ "description": "Exposed thermal die pad on the QFN32 underside - combined VSS / VSSA return. Solder to the PCB ground plane for electrical return and heat dissipation; the QFN32 pinout figure labels this pad 'VSS, VSSA' because there are no separate VSS pins in the 32 numbered leads."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}