← Commit history

Initial commit: component/gd32e230k8t6

Ray ·30ba69bd0d ·
2 files changed +122
README.mdadded+88
@@ -0,0 +1,88 @@+# GD32E230K8T6++**GigaDevice Semicon Beijing** · Microcontrollers (MCU/MPU/SOC) · LQFP-32(7x7)++GD32E230K8T6 from GigaDevice Semicon Beijing, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VDD | power_in | Digital positive supply, 1.8 V to 3.6 V. Decouple with a 100 nF ceramic per VDD pin plus a bulk cap. |+| 2 | PF0/OSCIN | bidirectional | GPIO PF0 (5 V tolerant). Alternate function I2C0_SDA. Additional function OSCIN (HXTAL crystal input). |+| 3 | PF1/OSCOUT | bidirectional | GPIO PF1 (5 V tolerant). Alternate function I2C0_SCL. Additional function OSCOUT (HXTAL crystal output). |+| 4 | NRST | bidirectional | Active-low bidirectional reset pin. Internal weak pull-up; can be driven low to reset the MCU, and is driven low by internal reset sources. |+| 5 | VDDA | power_in | Analog supply for ADC, comparator and reset block, 1.8 V to 3.6 V. Must be tied to VDD (or filtered from VDD) and decoupled to VSSA/VSS. |+| 6 | PA0/WKUP | bidirectional | GPIO PA0. Alternates: USART1_CTS, CMP_OUT, I2C1_SCL. Additional: ADC_IN0, CMP_IM6, RTC_TAMP1, WKUP0 (wakeup from Standby). |+| 7 | PA1 | bidirectional | GPIO PA1. Alternates: USART1_RTS, EVENTOUT. Additional: ADC_IN1, CMP_IP. |+| 8 | PA2 | bidirectional | GPIO PA2. Alternates: USART1_TX. Additional: ADC_IN2, CMP_IM7. |+| 9 | PA3 | bidirectional | GPIO PA3. Alternates: USART1_RX. Additional: ADC_IN3. |+| 10 | PA4 | bidirectional | GPIO PA4. Alternates: SPI0_NSS, I2S0_WS, USART1_CK, TIMER13_CH0, SPI1_NSS. Additional: ADC_IN4, CMP_IM4. |+| 11 | PA5 | bidirectional | GPIO PA5. Alternates: SPI0_SCK, I2S0_CK. Additional: ADC_IN5, CMP_IM5. |+| 12 | PA6 | bidirectional | GPIO PA6. Alternates: SPI0_MISO, I2S0_MCK, TIMER2_CH0, TIMER0_BRKIN, TIMER15_CH0, EVENTOUT, CMP_OUT. Additional: ADC_IN6. |+| 13 | PA7 | bidirectional | GPIO PA7. Alternates: SPI0_MOSI, I2S0_SD, TIMER2_CH1, TIMER13_CH0, TIMER0_CH0_ON, TIMER16_CH0, EVENTOUT. Additional: ADC_IN7. |+| 14 | PB0 | bidirectional | GPIO PB0. Alternates: TIMER2_CH2, TIMER0_CH1_ON, USART1_RX, EVENTOUT. Additional: ADC_IN8. |+| 15 | PB1 | bidirectional | GPIO PB1. Alternates: TIMER2_CH3, TIMER13_CH0, TIMER0_CH2_ON, SPI1_SCK. Additional: ADC_IN9. |+| 16 | VSS | power_in | Digital ground, 0 V reference. Tie to system ground plane along with analog VSSA. |+| 17 | VDD | power_in | Digital positive supply, 1.8 V to 3.6 V. Decouple with a 100 nF ceramic close to the pin. |+| 18 | PA8 | bidirectional | GPIO PA8 (5 V tolerant). Alternates: USART0_CK, TIMER0_CH0, CK_OUT, USART1_TX, EVENTOUT. |+| 19 | PA9 | bidirectional | GPIO PA9 (5 V tolerant). Alternates: USART0_TX, TIMER0_CH1, TIMER14_BRKIN, I2C0_SCL, CK_OUT. |+| 20 | PA10 | bidirectional | GPIO PA10 (5 V tolerant). Alternates: USART0_RX, TIMER0_CH2, TIMER16_BRKIN, I2C0_SDA. |+| 21 | PA11 | bidirectional | GPIO PA11 (5 V tolerant). Alternates: USART0_CTS, TIMER0_CH3, CMP_OUT, EVENTOUT, SPI1_IO2, I2C0_SMBA, I2C1_SCL. |+| 22 | PA12 | bidirectional | GPIO PA12 (5 V tolerant). Alternates: USART0_RTS, TIMER0_ETI, EVENTOUT, SPI1_IO3, I2C0_TXFRAME, I2C1_SDA. |+| 23 | PA13/SWDIO | bidirectional | GPIO PA13 (5 V tolerant). Default function is SWDIO (serial-wire debug data). Alternates: IFRP_OUT, SPI1_MISO. |+| 24 | PA14/SWCLK | bidirectional | GPIO PA14 (5 V tolerant). Default function is SWCLK (serial-wire debug clock). Alternates: USART1_TX, SPI1_MOSI. |+| 25 | PA15 | bidirectional | GPIO PA15 (5 V tolerant). Alternates: SPI0_NSS, I2S0_WS, USART1_RX, SPI1_NSS, EVENTOUT. |+| 26 | PB3 | bidirectional | GPIO PB3 (5 V tolerant). Alternates: SPI0_SCK, I2S0_CK, EVENTOUT. |+| 27 | PB4 | bidirectional | GPIO PB4 (5 V tolerant). Alternates: SPI0_MISO, I2S0_MCK, TIMER2_CH0, EVENTOUT, I2C0_TXFRAME, TIMER16_BRKIN. |+| 28 | PB5 | bidirectional | GPIO PB5 (5 V tolerant). Alternates: SPI0_MOSI, I2S0_SD, I2C0_SMBA, TIMER15_BRKIN, TIMER2_CH1. Additional: WKUP5 (wakeup from Standby). |+| 29 | PB6 | bidirectional | GPIO PB6 (5 V tolerant). Alternates: I2C0_SCL, USART0_TX, TIMER15_CH0_ON. |+| 30 | PB7 | bidirectional | GPIO PB7 (5 V tolerant). Alternates: I2C0_SDA, USART0_RX, TIMER16_CH0_ON. |+| 31 | BOOT0 | input | Boot-mode selection input. Sampled at reset to choose between Flash, System memory and SRAM boot sources. Tie low for normal Flash boot. |+| 32 | VSS | power_in | Digital ground, 0 V reference. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | GigaDevice Semicon Beijing |+| Package | LQFP-32(7x7) |+| Category | MCU |+| Pins | 32 |++## Ordering variants++- `GD32E230K8T6K4T6`+- `GD32E230K8T6K6T6`+- `GD32E230K8T6`+- `GD32E230K8T6K4U6`+- `GD32E230K8T6K6U6`+- `GD32E230K8T6K8U6`+- `GD32E230K8T6C4T6`+- `GD32E230K8T6C6T6`+- `GD32E230K8T6C8T6`+- `GD32E230K8T6G4U6`+- `GD32E230K8T6G6U6`+- `GD32E230K8T6G8U6`+- `GD32E230K8T6F4P6`+- `GD32E230K8T6F6P6`+- `GD32E230K8T6F8P6`+- `GD32E230K8T6F4V6`+- `GD32E230K8T6F6V6`+- `GD32E230K8T6F8V6`++## CAD (KiCad official)++- Symbol: `GD32E230K8T6`+- Footprint: `Package_QFP:LQFP-32_7x7mm_P0.8mm`+- 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [GigaDevice Semicon Beijing datasheet](docs/gd32e230k8t6-datasheet.pdf) (78 pp, sha256 `61f9b2a8e15460f6`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/gd32e230k8t6-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "gd32e230k8t6",+  "version": "0.1.0",+  "type": "component",+  "description": "GigaDevice Semicon Beijing Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "mcu",+    "gd32e230k8t6"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "gd32e230k8t6.kicad_sym",+    "gd32e230k8t6.kicad_mod",+    "gd32e230k8t6.glb",+    "gd32e230k8t6.step",+    "gd32e230k8t6.lbr",+    "docs/hero.png",+    "docs/gd32e230k8t6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file