← Commit history
README.mdadded+94@@ -0,0 +1,94 @@+# GD25Q16EEIGR++**GigaDevice Semicon Beijing** · NOR FLASH · USON-8(2x3)++GD25Q16EEIGR from GigaDevice Semicon Beijing, in a USON-8(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CS# | input | Active-low Chip Select input. Drives the SPI transaction: falling edge starts a command, rising edge terminates it. Must be driven high when the device is not selected; do not leave floating. |+| 2 | SO/IO1 | bidirectional | Standard SPI serial data output (SO). In Dual and Quad SPI modes this pin becomes bidirectional I/O line IO1. Data is shifted out on the falling edge of SCLK. |+| 3 | WP#/IO2 | bidirectional | Active-low Write Protect input; when low, protects the Block Protect bits (BP4-BP0) and SRP bits from being modified. In Quad SPI mode this pin becomes bidirectional data line IO2 (requires Quad Enable QE=1 in Status Register). Must be driven high or pulled up if unused. |+| 4 | VSS | power_in | Device ground reference. Connect to the system 0 V rail with a short, low-impedance return. |+| 5 | SI/IO0 | bidirectional | Standard SPI serial data input (SI). In Dual and Quad SPI modes this pin becomes bidirectional I/O line IO0. Input data is latched on the rising edge of SCLK. |+| 6 | SCLK | input | Serial Clock input. Provides the timing reference for the SPI bus; supports SPI modes 0 and 3. Maximum 133 MHz for fast-read operations with 30 pF load. |+| 7 | HOLD#/IO3 | bidirectional | Active-low HOLD input when QE=0: pausing serial communication without deselecting the chip. When Quad Enable (QE=1) this pin becomes bidirectional data line IO3. Must be driven high or pulled up if unused. |+| 8 | VCC | power_in | Single-supply power input, 2.7 V to 3.6 V. Decouple locally with a 100 nF ceramic capacitor close to the pin. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | GigaDevice Semicon Beijing |+| Package | USON-8(2x3) |+| Category | Memory |+| Pins | 8 |++## Ordering variants++- `GD25Q16EEIGR`+- `GD25Q16EEIGREEIS`+- `GD25Q16EEIGREEJG`+- `GD25Q16EEIGREEJS`+- `GD25Q16EEIGREEEG`+- `GD25Q16EEIGREEES`+- `GD25Q16EEIGREEFG`+- `GD25Q16EEIGREEFS`+- `GD25Q16EEIGRETIG`+- `GD25Q16EEIGRETIS`+- `GD25Q16EEIGRETJG`+- `GD25Q16EEIGRETJS`+- `GD25Q16EEIGRETEG`+- `GD25Q16EEIGRETES`+- `GD25Q16EEIGRETFG`+- `GD25Q16EEIGRETFS`+- `GD25Q16EEIGRESIG`+- `GD25Q16EEIGRESIS`+- `GD25Q16EEIGRESJG`+- `GD25Q16EEIGRESJS`+- `GD25Q16EEIGRESEG`+- `GD25Q16EEIGRESES`+- `GD25Q16EEIGRESFG`+- `GD25Q16EEIGRESFS`+- `GD25Q16EEIGRENIG`+- `GD25Q16EEIGRENIS`+- `GD25Q16EEIGRENJG`+- `GD25Q16EEIGRENJS`+- `GD25Q16EEIGRENEG`+- `GD25Q16EEIGRENES`+- `GD25Q16EEIGRENFG`+- `GD25Q16EEIGRENFS`+- `GD25Q16EEIGREQIG`+- `GD25Q16EEIGREQIS`+- `GD25Q16EEIGREQJG`+- `GD25Q16EEIGREQJS`+- `GD25Q16EEIGREQEG`+- `GD25Q16EEIGREQES`+- `GD25Q16EEIGREQFG`+- `GD25Q16EEIGREQFS`+- `GD25Q16EEIGREWIG`+- `GD25Q16EEIGREWIS`+- `GD25Q16EEIGREWJG`+- `GD25Q16EEIGREWJS`+- `GD25Q16EEIGREWEG`+- `GD25Q16EEIGREWES`+- `GD25Q16EEIGREWFG`+- `GD25Q16EEIGREWFS`++## CAD (KiCad official)++- Symbol: `GD25Q16EEIGR`+- Footprint: `Package_SON:Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm`+- 3D model: USON-8(2x3) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [GigaDevice Semicon Beijing datasheet](docs/gd25q16eeigr-datasheet.pdf) (58 pp, sha256 `cde85a649968cd40`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/gd25q16eeigr-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "gd25q16eeigr",+ "version": "0.1.0",+ "type": "component",+ "description": "GigaDevice Semicon Beijing NOR FLASH, USON-8(2x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "memory",+ "gd25q16eeigr"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "gd25q16eeigr.kicad_sym",+ "gd25q16eeigr.kicad_mod",+ "gd25q16eeigr.glb",+ "gd25q16eeigr.step",+ "gd25q16eeigr.lbr",+ "docs/hero.png",+ "docs/gd25q16eeigr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}