← Commit history

ft64f0a5-trb: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·a25fdf8ee9 · ·parent 8168f68
1 file changed +146−1
page.json+146−1
@@ -33,5 +33,150 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "FT64F0A5-TRB",+    "manufacturer": "FMD Fremont Micro Devices",+    "package": "TSSOP-20",+    "pin_count": 20,+    "category": "Microcontrollers (MCU/MPU/SOC)",+    "parts": {+      "symbol": "ft64f0a5-trb.kicad_sym",+      "footprint": "ft64f0a5-trb.kicad_mod",+      "model_3d": "ft64f0a5-trb-etched.glb",+      "model_3d_plain": "ft64f0a5-trb.glb",+      "model_3d_step": "ft64f0a5-trb-etched.step",+      "model_3d_step_plain": "ft64f0a5-trb.step",+      "lbr": "ft64f0a5-trb.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "PA5/LVDOUT/TIM2_CH1/UART1_CK/OP0P",+        "type": "bidirectional",+        "description": "GPIO PA5. Alt: LVDOUT (LVD level output), TIM2 PWM channel 1, UART1 synchronous-mode clock output, OP0 op-amp non-inverting input."+      },+      {+        "number": "2",+        "name": "PA6/AN3/UART1_TX/OP0N/[AT0]",+        "type": "bidirectional",+        "description": "GPIO PA6. Alt: ADC input channel AN3, UART1 TX data output, OP0 op-amp inverting input, internal test pin AT0."+      },+      {+        "number": "3",+        "name": "PA7/AN4/[CLKO]/[TIM1_CH4]/UART1_RX/ELVD0/OP0OUT/[AT1]/[UART2_TX]",+        "type": "bidirectional",+        "description": "GPIO PA7. Alt: ADC input AN4, internal clock output CLKO (remap), TIM1 PWM CH4 (remap), UART1 RX input, external LVD input ELVD0, OP0 op-amp output, internal test AT1, UART2 TX (remap)."+      },+      {+        "number": "4",+        "name": "PC0/AN5/MCLRB/TIM1_CH1N/ELVD1",+        "type": "bidirectional",+        "description": "GPIO PC0. Alt: ADC input AN5, external master reset MCLRB (active low), TIM1 PWM CH1 complementary output, external LVD input ELVD1."+      },+      {+        "number": "5",+        "name": "PC1/OSC1/[SPI_MISO]/ELVD2",+        "type": "bidirectional",+        "description": "GPIO PC1. Alt: crystal oscillator input OSC1, SPI MISO (remap), external LVD input ELVD2."+      },+      {+        "number": "6",+        "name": "PB7/OSC2/[SPI_MOSI]/ELVD3",+        "type": "bidirectional",+        "description": "GPIO PB7. Alt: crystal oscillator output OSC2, SPI MOSI (remap), external LVD input ELVD3."+      },+      {+        "number": "7",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference (0 V)."+      },+      {+        "number": "8",+        "name": "PB6/AN6/I2C_SDA/[UART1_TX]/ISPDAT",+        "type": "bidirectional",+        "description": "GPIO PB6. Alt: ADC input AN6, I2C SDA data line, UART1 TX (remap), ISP programming data ISPDAT."+      },+      {+        "number": "9",+        "name": "VDD",+        "type": "power_in",+        "description": "Main supply voltage. Operating range 1.9-5.5 V (8 MHz at >=1.9 V, 16 MHz at >=2.7 V, IAP at >=2.7 V)."+      },+      {+        "number": "10",+        "name": "PB5/[LVDOUT]/TIM2_CH3/SPI_NSS/UART2_RX",+        "type": "bidirectional",+        "description": "GPIO PB5. Alt: LVDOUT (remap), TIM2 PWM channel 3, SPI slave-select NSS, UART2 RX data input."+      },+      {+        "number": "11",+        "name": "PB4/[LVDOUT]/I2C_SDA/TIM1_BKIN/UART2_TX",+        "type": "bidirectional",+        "description": "GPIO PB4. Alt: LVDOUT (remap), I2C SDA data line, TIM1 brake input, UART2 TX data output."+      },+      {+        "number": "12",+        "name": "PB3/[LVDOUT]/I2C_SCL/[ADC_ETR]/TIM1_ETR/UART2_CK",+        "type": "bidirectional",+        "description": "GPIO PB3. Alt: LVDOUT (remap), I2C SCL clock, ADC external trigger (remap), TIM1 external trigger, UART2 synchronous clock."+      },+      {+        "number": "13",+        "name": "PB2/TIM1_CH3/[SPI_SCK]/[TIM1_CH1N]",+        "type": "bidirectional",+        "description": "GPIO PB2. Alt: TIM1 PWM channel 3, SPI clock SCK (remap), TIM1 PWM CH1 complementary output (remap)."+      },+      {+        "number": "14",+        "name": "PB1/AN0/TIM1_CH4/CLKO/TIM1_CH2N",+        "type": "bidirectional",+        "description": "GPIO PB1. Alt: ADC input AN0, TIM1 PWM channel 4 output, internal clock output CLKO, TIM1 PWM CH2 complementary output."+      },+      {+        "number": "15",+        "name": "PB0/[TIM1_CH2]/SPI_CK/TIM1_CH3N/[TIM2_CH1]",+        "type": "bidirectional",+        "description": "GPIO PB0. Alt: TIM1 CH2 (remap), SPI clock, TIM1 PWM CH3 complementary output, TIM2 PWM CH1 (remap)."+      },+      {+        "number": "16",+        "name": "PA0/SPI_MOSI/TIM1_CH1/VREFN",+        "type": "bidirectional",+        "description": "GPIO PA0. Alt: SPI MOSI, TIM1 PWM channel 1, ADC external negative reference VREFN."+      },+      {+        "number": "17",+        "name": "PA1/SPI_MISO/TIM1_CH2/VREFP",+        "type": "bidirectional",+        "description": "GPIO PA1. Alt: SPI MISO, TIM1 PWM channel 2, ADC external positive reference VREFP."+      },+      {+        "number": "18",+        "name": "PA2/[TIM1_CH4]/[I2C_SCL]/[UART1_RX]/ISPCK",+        "type": "bidirectional",+        "description": "GPIO PA2. Alt: TIM1 CH4 (remap), I2C SCL (remap), UART1 RX (remap), ISP programming clock ISPCK."+      },+      {+        "number": "19",+        "name": "PA3/AN1/[TIM2_CH3]/[UART2_TX]",+        "type": "bidirectional",+        "description": "GPIO PA3. Alt: ADC input AN1, TIM2 PWM CH3 (remap), UART2 TX (remap)."+      },+      {+        "number": "20",+        "name": "PA4/AN2/TIM2_CH2/ADC_ETR/[UART2_RX]",+        "type": "bidirectional",+        "description": "GPIO PA4. Alt: ADC input AN2, TIM2 PWM channel 2, ADC external trigger input, UART2 RX (remap)."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}