← Commit history

ft4232hl-reel: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·ce66b061e5 · ·parent 21d7611
1 file changed +410−1
page.json+410−1
@@ -32,5 +32,414 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "FT4232HL-Reel",+    "manufacturer": "FTDI",+    "package": "LQFP-64(10x10)",+    "pin_count": 64,+    "category": "USB Converters",+    "parts": {+      "symbol": "ft4232hl-reel.kicad_sym",+      "footprint": "ft4232hl-reel.kicad_mod",+      "model_3d": "ft4232hl-reel-etched.glb",+      "model_3d_plain": "ft4232hl-reel.glb",+      "model_3d_step": "ft4232hl-reel-etched.step",+      "model_3d_step_plain": "ft4232hl-reel.step",+      "lbr": "ft4232hl-reel.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "0 V digital ground input."+      },+      {+        "number": "2",+        "name": "OSCI",+        "type": "input",+        "description": "Oscillator input. Connect the 12 MHz crystal here (or an external 12 MHz reference)."+      },+      {+        "number": "3",+        "name": "OSCO",+        "type": "output",+        "description": "Oscillator output. Connect the second terminal of the 12 MHz crystal here."+      },+      {+        "number": "4",+        "name": "VPHY",+        "type": "power_in",+        "description": "+3.3 V internal USB PHY power supply input. Must not be tied directly to VBUS; supply from a 3.3 V regulator, LC-filtered."+      },+      {+        "number": "5",+        "name": "GND",+        "type": "power_in",+        "description": "0 V digital ground input."+      },+      {+        "number": "6",+        "name": "REF",+        "type": "input",+        "description": "Bandgap current reference. Connect to GND via a 12 kΩ 1% resistor."+      },+      {+        "number": "7",+        "name": "DM",+        "type": "bidirectional",+        "description": "USB 2.0 data signal minus (D−). Connect to the USB connector D− via appropriate series resistors per USB compliance."+      },+      {+        "number": "8",+        "name": "DP",+        "type": "bidirectional",+        "description": "USB 2.0 data signal plus (D+). Connect to the USB connector D+ per USB compliance."+      },+      {+        "number": "9",+        "name": "VPLL",+        "type": "power_in",+        "description": "+3.3 V internal PHY PLL power supply input. Filter with an LC network."+      },+      {+        "number": "10",+        "name": "AGND",+        "type": "power_in",+        "description": "0 V analog ground."+      },+      {+        "number": "11",+        "name": "GND",+        "type": "power_in",+        "description": "0 V digital ground input."+      },+      {+        "number": "12",+        "name": "VCORE",+        "type": "power_in",+        "description": "+1.8 V core supply input. Tie to VREGOUT (pin 49) with a 3.3 µF filter capacitor."+      },+      {+        "number": "13",+        "name": "TEST",+        "type": "input",+        "description": "Factory test pin. Must be tied to GND for normal operation."+      },+      {+        "number": "14",+        "name": "RESET#",+        "type": "input",+        "description": "Active-low reset input. Pull high (via pull-up) for normal operation; assert low to reset the device."+      },+      {+        "number": "15",+        "name": "GND",+        "type": "power_in",+        "description": "0 V digital ground input."+      },+      {+        "number": "16",+        "name": "ADBUS0",+        "type": "bidirectional",+        "description": "Channel A bit 0. UART: TXD (output). Async/Sync bit-bang: D0. MPSSE: TCK/SK clock output."+      },+      {+        "number": "17",+        "name": "ADBUS1",+        "type": "bidirectional",+        "description": "Channel A bit 1. UART: RXD (input). Bit-bang: D1. MPSSE: TDI/DO output."+      },+      {+        "number": "18",+        "name": "ADBUS2",+        "type": "bidirectional",+        "description": "Channel A bit 2. UART: RTS# (output). Bit-bang: D2. MPSSE: TDO/DI input."+      },+      {+        "number": "19",+        "name": "ADBUS3",+        "type": "bidirectional",+        "description": "Channel A bit 3. UART: CTS# (input). Bit-bang: D3. MPSSE: TMS/CS output."+      },+      {+        "number": "20",+        "name": "VCCIO",+        "type": "power_in",+        "description": "+3.3 V I/O interface power supply input. Failure to connect all VCCIO pins will result in device failure."+      },+      {+        "number": "21",+        "name": "ADBUS4",+        "type": "bidirectional",+        "description": "Channel A bit 4. UART: DTR# (output). Bit-bang: D4. MPSSE: GPIOL0."+      },+      {+        "number": "22",+        "name": "ADBUS5",+        "type": "bidirectional",+        "description": "Channel A bit 5. UART: DSR# (input). Bit-bang: D5. MPSSE: GPIOL1."+      },+      {+        "number": "23",+        "name": "ADBUS6",+        "type": "bidirectional",+        "description": "Channel A bit 6. UART: DCD# (input). Bit-bang: D6. MPSSE: GPIOL2."+      },+      {+        "number": "24",+        "name": "ADBUS7",+        "type": "bidirectional",+        "description": "Channel A bit 7. UART: RI# input or TXDEN output (EEPROM-selectable; default RI#). Bit-bang: D7. MPSSE: GPIOL3."+      },+      {+        "number": "25",+        "name": "GND",+        "type": "power_in",+        "description": "0 V digital ground input."+      },+      {+        "number": "26",+        "name": "BDBUS0",+        "type": "bidirectional",+        "description": "Channel B bit 0. UART: TXD (output). Bit-bang: D0. MPSSE: TCK/SK."+      },+      {+        "number": "27",+        "name": "BDBUS1",+        "type": "bidirectional",+        "description": "Channel B bit 1. UART: RXD (input). Bit-bang: D1. MPSSE: TDI/DO."+      },+      {+        "number": "28",+        "name": "BDBUS2",+        "type": "bidirectional",+        "description": "Channel B bit 2. UART: RTS# (output). Bit-bang: D2. MPSSE: TDO/DI."+      },+      {+        "number": "29",+        "name": "BDBUS3",+        "type": "bidirectional",+        "description": "Channel B bit 3. UART: CTS# (input). Bit-bang: D3. MPSSE: TMS/CS."+      },+      {+        "number": "30",+        "name": "BDBUS4",+        "type": "bidirectional",+        "description": "Channel B bit 4. UART: DTR# (output). Bit-bang: D4. MPSSE: GPIOL0."+      },+      {+        "number": "31",+        "name": "VCCIO",+        "type": "power_in",+        "description": "+3.3 V I/O interface power supply input. All VCCIO pins must be connected."+      },+      {+        "number": "32",+        "name": "BDBUS5",+        "type": "bidirectional",+        "description": "Channel B bit 5. UART: DSR# (input). Bit-bang: D5. MPSSE: GPIOL1."+      },+      {+        "number": "33",+        "name": "BDBUS6",+        "type": "bidirectional",+        "description": "Channel B bit 6. UART: DCD# (input). Bit-bang: D6. MPSSE: GPIOL2."+      },+      {+        "number": "34",+        "name": "BDBUS7",+        "type": "bidirectional",+        "description": "Channel B bit 7. UART: RI# or TXDEN (EEPROM-selectable). Bit-bang: D7. MPSSE: GPIOL3."+      },+      {+        "number": "35",+        "name": "GND",+        "type": "power_in",+        "description": "0 V digital ground input."+      },+      {+        "number": "36",+        "name": "SUSPEND#",+        "type": "output",+        "description": "Active-low output; asserted when USB is in suspend mode. Useful for gating external circuitry when suspended."+      },+      {+        "number": "37",+        "name": "VCORE",+        "type": "power_in",+        "description": "+1.8 V core supply input. All VCORE pins must be tied together and to VREGOUT."+      },+      {+        "number": "38",+        "name": "CDBUS0",+        "type": "bidirectional",+        "description": "Channel C bit 0. UART: TXD. Bit-bang: D0. Channel C supports RS232/RS422/RS485 or bit-bang (no MPSSE)."+      },+      {+        "number": "39",+        "name": "CDBUS1",+        "type": "bidirectional",+        "description": "Channel C bit 1. UART: RXD. Bit-bang: D1."+      },+      {+        "number": "40",+        "name": "CDBUS2",+        "type": "bidirectional",+        "description": "Channel C bit 2. UART: RTS#. Bit-bang: D2."+      },+      {+        "number": "41",+        "name": "CDBUS3",+        "type": "bidirectional",+        "description": "Channel C bit 3. UART: CTS#. Bit-bang: D3."+      },+      {+        "number": "42",+        "name": "VCCIO",+        "type": "power_in",+        "description": "+3.3 V I/O interface power supply input. All VCCIO pins must be connected."+      },+      {+        "number": "43",+        "name": "CDBUS4",+        "type": "bidirectional",+        "description": "Channel C bit 4. UART: DTR#. Bit-bang: D4."+      },+      {+        "number": "44",+        "name": "CDBUS5",+        "type": "bidirectional",+        "description": "Channel C bit 5. UART: DSR#. Bit-bang: D5."+      },+      {+        "number": "45",+        "name": "CDBUS6",+        "type": "bidirectional",+        "description": "Channel C bit 6. UART: DCD#. Bit-bang: D6."+      },+      {+        "number": "46",+        "name": "CDBUS7",+        "type": "bidirectional",+        "description": "Channel C bit 7. UART: RI# or TXDEN (EEPROM-selectable). Bit-bang: D7."+      },+      {+        "number": "47",+        "name": "GND",+        "type": "power_in",+        "description": "0 V digital ground input."+      },+      {+        "number": "48",+        "name": "DDBUS0",+        "type": "bidirectional",+        "description": "Channel D bit 0. UART: TXD. Bit-bang: D0. Channel D supports RS232/RS422/RS485 or bit-bang (no MPSSE)."+      },+      {+        "number": "49",+        "name": "VREGOUT",+        "type": "power_out",+        "description": "+1.8 V output of the integrated LDO. Connect to all VCORE pins with a 3.3 µF filter capacitor."+      },+      {+        "number": "50",+        "name": "VREGIN",+        "type": "power_in",+        "description": "+3.3 V input to the integrated 1.8 V LDO regulator."+      },+      {+        "number": "51",+        "name": "GND",+        "type": "power_in",+        "description": "0 V digital ground input."+      },+      {+        "number": "52",+        "name": "DDBUS1",+        "type": "bidirectional",+        "description": "Channel D bit 1. UART: RXD. Bit-bang: D1."+      },+      {+        "number": "53",+        "name": "DDBUS2",+        "type": "bidirectional",+        "description": "Channel D bit 2. UART: RTS#. Bit-bang: D2."+      },+      {+        "number": "54",+        "name": "DDBUS3",+        "type": "bidirectional",+        "description": "Channel D bit 3. UART: CTS#. Bit-bang: D3."+      },+      {+        "number": "55",+        "name": "DDBUS4",+        "type": "bidirectional",+        "description": "Channel D bit 4. UART: DTR#. Bit-bang: D4."+      },+      {+        "number": "56",+        "name": "VCCIO",+        "type": "power_in",+        "description": "+3.3 V I/O interface power supply input. All VCCIO pins must be connected."+      },+      {+        "number": "57",+        "name": "DDBUS5",+        "type": "bidirectional",+        "description": "Channel D bit 5. UART: DSR#. Bit-bang: D5."+      },+      {+        "number": "58",+        "name": "DDBUS6",+        "type": "bidirectional",+        "description": "Channel D bit 6. UART: DCD#. Bit-bang: D6."+      },+      {+        "number": "59",+        "name": "DDBUS7",+        "type": "bidirectional",+        "description": "Channel D bit 7. UART: RI# or TXDEN (EEPROM-selectable). Bit-bang: D7."+      },+      {+        "number": "60",+        "name": "PWREN#",+        "type": "output",+        "description": "Active-low power-enable output. Low = normal operation; high = USB suspend or device not yet configured. Useful for gating external supplies."+      },+      {+        "number": "61",+        "name": "EEDATA",+        "type": "bidirectional",+        "description": "External serial EEPROM data I/O. Connects to the EEPROM DI directly and to EEPROM DO through a 2.2 kΩ resistor; DO also pulled up to VCC with 10 kΩ. Tri-state during device reset."+      },+      {+        "number": "62",+        "name": "EECLK",+        "type": "output",+        "description": "External serial EEPROM clock output. Tri-state during device reset."+      },+      {+        "number": "63",+        "name": "EECS",+        "type": "bidirectional",+        "description": "External serial EEPROM chip-select. Tri-state during device reset."+      },+      {+        "number": "64",+        "name": "VCORE",+        "type": "power_in",+        "description": "+1.8 V core supply input. Tie to VREGOUT (pin 49) with the other VCORE pins."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}