← Commit history

ft24c128a-esr-t: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·314f91f7fa · ·parent 9c967a2
1 file changed +74−1
page.json+74−1
@@ -33,5 +33,78 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "FT24C128A-ESR-T",+    "manufacturer": "FMD Fremont Micro Devices",+    "package": "SOP-8",+    "pin_count": 8,+    "category": "EEPROM",+    "parts": {+      "symbol": "ft24c128a-esr-t.kicad_sym",+      "footprint": "ft24c128a-esr-t.kicad_mod",+      "model_3d": "ft24c128a-esr-t-etched.glb",+      "model_3d_plain": "ft24c128a-esr-t.glb",+      "model_3d_step": "ft24c128a-esr-t-etched.step",+      "model_3d_step_plain": "ft24c128a-esr-t.step",+      "lbr": "ft24c128a-esr-t.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "A0",+        "type": "input",+        "description": "Device address input bit 0. Hardwired to VIH or VIL to set the chip's 3-bit slave address (matches bit 5 of the 8-bit device address word 1010_A2A1A0_RW). Internally pulled to VIL if left unconnected."+      },+      {+        "number": "2",+        "name": "A1",+        "type": "input",+        "description": "Device address input bit 1. Hardwired to VIH or VIL to set the chip's slave address. Internally recognized as VIL if left unconnected."+      },+      {+        "number": "3",+        "name": "A2",+        "type": "input",+        "description": "Device address input bit 2. Hardwired to VIH or VIL to set the chip's slave address. Internally recognized as VIL if left unconnected."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Ground / VSS return for the device."+      },+      {+        "number": "5",+        "name": "SDA",+        "type": "bidirectional",+        "description": "Serial data line for the 2-wire (I2C-compatible) bus. Open-drain bidirectional signal requiring an external pull-up resistor to VCC (typ. 1.3kΩ for AC characterization). Can be wire-ORed with other open-drain devices."+      },+      {+        "number": "6",+        "name": "SCL",+        "type": "input",+        "description": "Serial clock input for the 2-wire bus. Rising edge latches data into the EEPROM; falling edge clocks data out. Schmitt-trigger, filtered input."+      },+      {+        "number": "7",+        "name": "WP",+        "type": "input",+        "description": "Write Protect input. Tie to VIL (or leave unconnected) to allow programming of the EEPROM array; tie to VIH or VCC to disable all write operations. Read operations are unaffected by WP."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply voltage, 1.8V to 5.5V. Typical read current 0.4 mA and write current 2.0 mA at VCC = 5.0V, SCL = 100 kHz; standby current typically < 1µA."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}