← Commit history

Initial commit: component/fsvp532

Ray ·ac37fae4f2 ·
2 files changed +418
README.mdadded+77
@@ -0,0 +1,77 @@+# FSVP532++**Forsinve** · RFID ICs · QFN-40(6x6)++FSVP532 from Forsinve, in a QFN-40(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | DVSS | power_in | Digital ground. |+| 2 | LOADMOD | output | Load modulation signal output referenced to DVDD. |+| 3 | TVSS1 | power_in | Transmitter ground. |+| 4 | TX1 | output | Transmitter output 1 transmitting modulated 13.56 MHz energy carrier. |+| 5 | TVDD | power_in | Transmitter power supply. |+| 6 | TX2 | output | Transmitter output 2 transmitting modulated 13.56 MHz energy carrier. |+| 7 | TVSS2 | power_in | Transmitter ground. |+| 8 | AVDD | power_in | Analog power supply. |+| 9 | VMID | output | Internally generated reference voltage to bias the receiving path. |+| 10 | RX | input | Receiver input referenced to AVDD. |+| 11 | AVSS | power_in | Analog ground. |+| 12 | AUX1 | output | Auxiliary output 1 for analog and digital test signals. |+| 13 | AUX2 | output | Auxiliary output 2 for analog and digital test signals. |+| 14 | OSCIN | input | Crystal oscillator input to oscillator inverting amplifier. |+| 15 | OSCOUT | output | Crystal oscillator output from oscillator inverting amplifier. |+| 16 | I0 | input | Host interface selector 0 referenced to DVDD. |+| 17 | I1 | input | Host interface selector 1 referenced to DVDD. |+| 18 | TESTEN | input | Reserved for test, connect to ground for normal operation. |+| 19 | P35 | bidirectional | General purpose IO referenced to DVDD. |+| 20 | N.C. | unconnected | Not connected. |+| 21 | N.C. | unconnected | Not connected. |+| 22 | N.C. | unconnected | Not connected. |+| 23 | PVDD | power_in | Pad power supply. |+| 24 | P30/UART_RX | bidirectional | General purpose IO or debug UART receive input referenced to PVDD. |+| 25 | P70_IRQ | bidirectional | General purpose IO or interrupt request to host referenced to PVDD. |+| 26 | RSTOUT_N | output | Reset indicator output, active low when circuit is in reset state. |+| 27 | NSS/P50_SCL/HSU_RX | bidirectional | Host interface pin for SPI NSS, I2C SCL, or HSU receive referenced to PVDD. |+| 28 | MOSI/SDA/HSU_TX | bidirectional | Host interface pin for SPI MOSI, I2C SDA, or HSU transmit referenced to PVDD. |+| 29 | MISO/P71 | bidirectional | Host interface pin for SPI MISO or general purpose IO referenced to PVDD. |+| 30 | SCK/P72 | bidirectional | Host interface serial clock or general purpose IO referenced to PVDD. |+| 31 | P31/UART_TX | bidirectional | General purpose IO or debug UART transmit referenced to PVDD. |+| 32 | P32_INT0 | bidirectional | General purpose IO or interrupt source INT0 referenced to PVDD. |+| 33 | P33_INT1 | bidirectional | General purpose IO or interrupt source INT1 referenced to PVDD. |+| 34 | P34/SIC_CLK | bidirectional | General purpose IO or secure IC clock referenced to SVDD. |+| 35 | SIGOUT | output | Contactless communication interface output delivering serial data stream according to NFCIP-1 to secure IC. |+| 36 | SIGIN | input | Contactless communication interface input accepting serial data stream according to NFCIP-1 from secure IC. |+| 37 | SVDD | power_out | Switchable output power for secure IC power supply with overload detection and reference voltage for secure IC communication. |+| 38 | RSTPD_N | input | Reset and Power-Down active low input, disables current sources, oscillator, and input pads when low. |+| 39 | DVDD | power_out | Internal digital power supply output. |+| 40 | VBAT | power_in | Main external power supply input, 2.7 to 5.5 V. |+| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Forsinve |+| Package | QFN-40(6x6) |+| Category | RF And Wireless |+| Pins | 41 |++## CAD (KiCad official)++- Symbol: `FSVP532`+- Footprint: `Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm`+- 3D model: QFN-40(6x6) (KiCad packages3D, STEP)+- 3D model files: `fsvp532-etched.step` / `fsvp532-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `fsvp532.step` / `fsvp532.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Forsinve datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590905464635150336) (20 pp, sha256 `32c7bfdb7a4f9d78`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/fsvp532-datasheet.pdf)
page.jsonadded+341
@@ -0,0 +1,341 @@+{+  "slug": "fsvp532",+  "version": "0.1.0",+  "type": "component",+  "description": "Forsinve RFID ICs, QFN-40(6x6). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "rf and wireless",+    "fsvp532",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "fsvp532.kicad_sym",+    "fsvp532.kicad_mod",+    "fsvp532.glb",+    "fsvp532.step",+    "fsvp532.lbr",+    "docs/hero.png",+    "docs/fsvp532-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "FSVP532",+    "manufacturer": "Forsinve",+    "package": "QFN-40(6x6)",+    "pin_count": 41,+    "category": "RF And Wireless",+    "subcategory": "RFID ICs",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590905464635150336",+    "parts": {+      "symbol": "fsvp532.kicad_sym",+      "footprint": "fsvp532.kicad_mod",+      "model_3d": "fsvp532-etched.glb",+      "model_3d_plain": "fsvp532.glb",+      "model_3d_step": "fsvp532-etched.step",+      "model_3d_step_plain": "fsvp532.step",+      "lbr": "fsvp532.lbr"+    },+    "distributor_links": {+      "lcsc": "C5336464"+    },+    "pins": [+      {+        "number": "1",+        "name": "DVSS",+        "type": "power_in",+        "description": "Digital ground."+      },+      {+        "number": "2",+        "name": "LOADMOD",+        "type": "output",+        "description": "Load modulation signal output referenced to DVDD."+      },+      {+        "number": "3",+        "name": "TVSS1",+        "type": "power_in",+        "description": "Transmitter ground."+      },+      {+        "number": "4",+        "name": "TX1",+        "type": "output",+        "description": "Transmitter output 1 transmitting modulated 13.56 MHz energy carrier."+      },+      {+        "number": "5",+        "name": "TVDD",+        "type": "power_in",+        "description": "Transmitter power supply."+      },+      {+        "number": "6",+        "name": "TX2",+        "type": "output",+        "description": "Transmitter output 2 transmitting modulated 13.56 MHz energy carrier."+      },+      {+        "number": "7",+        "name": "TVSS2",+        "type": "power_in",+        "description": "Transmitter ground."+      },+      {+        "number": "8",+        "name": "AVDD",+        "type": "power_in",+        "description": "Analog power supply."+      },+      {+        "number": "9",+        "name": "VMID",+        "type": "output",+        "description": "Internally generated reference voltage to bias the receiving path."+      },+      {+        "number": "10",+        "name": "RX",+        "type": "input",+        "description": "Receiver input referenced to AVDD."+      },+      {+        "number": "11",+        "name": "AVSS",+        "type": "power_in",+        "description": "Analog ground."+      },+      {+        "number": "12",+        "name": "AUX1",+        "type": "output",+        "description": "Auxiliary output 1 for analog and digital test signals."+      },+      {+        "number": "13",+        "name": "AUX2",+        "type": "output",+        "description": "Auxiliary output 2 for analog and digital test signals."+      },+      {+        "number": "14",+        "name": "OSCIN",+        "type": "input",+        "description": "Crystal oscillator input to oscillator inverting amplifier."+      },+      {+        "number": "15",+        "name": "OSCOUT",+        "type": "output",+        "description": "Crystal oscillator output from oscillator inverting amplifier."+      },+      {+        "number": "16",+        "name": "I0",+        "type": "input",+        "description": "Host interface selector 0 referenced to DVDD."+      },+      {+        "number": "17",+        "name": "I1",+        "type": "input",+        "description": "Host interface selector 1 referenced to DVDD."+      },+      {+        "number": "18",+        "name": "TESTEN",+        "type": "input",+        "description": "Reserved for test, connect to ground for normal operation."+      },+      {+        "number": "19",+        "name": "P35",+        "type": "bidirectional",+        "description": "General purpose IO referenced to DVDD."+      },+      {+        "number": "20",+        "name": "N.C.",+        "type": "unconnected",+        "description": "Not connected."+      },+      {+        "number": "21",+        "name": "N.C.",+        "type": "unconnected",+        "description": "Not connected."+      },+      {+        "number": "22",+        "name": "N.C.",+        "type": "unconnected",+        "description": "Not connected."+      },+      {+        "number": "23",+        "name": "PVDD",+        "type": "power_in",+        "description": "Pad power supply."+      },+      {+        "number": "24",+        "name": "P30/UART_RX",+        "type": "bidirectional",+        "description": "General purpose IO or debug UART receive input referenced to PVDD."+      },+      {+        "number": "25",+        "name": "P70_IRQ",+        "type": "bidirectional",+        "description": "General purpose IO or interrupt request to host referenced to PVDD."+      },+      {+        "number": "26",+        "name": "RSTOUT_N",+        "type": "output",+        "description": "Reset indicator output, active low when circuit is in reset state."+      },+      {+        "number": "27",+        "name": "NSS/P50_SCL/HSU_RX",+        "type": "bidirectional",+        "description": "Host interface pin for SPI NSS, I2C SCL, or HSU receive referenced to PVDD."+      },+      {+        "number": "28",+        "name": "MOSI/SDA/HSU_TX",+        "type": "bidirectional",+        "description": "Host interface pin for SPI MOSI, I2C SDA, or HSU transmit referenced to PVDD."+      },+      {+        "number": "29",+        "name": "MISO/P71",+        "type": "bidirectional",+        "description": "Host interface pin for SPI MISO or general purpose IO referenced to PVDD."+      },+      {+        "number": "30",+        "name": "SCK/P72",+        "type": "bidirectional",+        "description": "Host interface serial clock or general purpose IO referenced to PVDD."+      },+      {+        "number": "31",+        "name": "P31/UART_TX",+        "type": "bidirectional",+        "description": "General purpose IO or debug UART transmit referenced to PVDD."+      },+      {+        "number": "32",+        "name": "P32_INT0",+        "type": "bidirectional",+        "description": "General purpose IO or interrupt source INT0 referenced to PVDD."+      },+      {+        "number": "33",+        "name": "P33_INT1",+        "type": "bidirectional",+        "description": "General purpose IO or interrupt source INT1 referenced to PVDD."+      },+      {+        "number": "34",+        "name": "P34/SIC_CLK",+        "type": "bidirectional",+        "description": "General purpose IO or secure IC clock referenced to SVDD."+      },+      {+        "number": "35",+        "name": "SIGOUT",+        "type": "output",+        "description": "Contactless communication interface output delivering serial data stream according to NFCIP-1 to secure IC."+      },+      {+        "number": "36",+        "name": "SIGIN",+        "type": "input",+        "description": "Contactless communication interface input accepting serial data stream according to NFCIP-1 from secure IC."+      },+      {+        "number": "37",+        "name": "SVDD",+        "type": "power_out",+        "description": "Switchable output power for secure IC power supply with overload detection and reference voltage for secure IC communication."+      },+      {+        "number": "38",+        "name": "RSTPD_N",+        "type": "input",+        "description": "Reset and Power-Down active low input, disables current sources, oscillator, and input pads when low."+      },+      {+        "number": "39",+        "name": "DVDD",+        "type": "power_out",+        "description": "Internal digital power supply output."+      },+      {+        "number": "40",+        "name": "VBAT",+        "type": "power_in",+        "description": "Main external power supply input, 2.7 to 5.5 V."+      },+      {+        "number": "41",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 41 added from the footprint"+        ],+        "pages_sent": 20,+        "cost_usd": 0.3215,+        "at": "2026-09-22T06:32:52"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590905464635150336",+        "pages": 20,+        "sha256": "32c7bfdb7a4f9d78",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 41,+        "described": 41,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file