← Commit history

Initial commit: component/fsv9563

Ray ·e4e8d99c5f ·
2 files changed +102
README.mdadded+68
@@ -0,0 +1,68 @@+# FSV9563++**Forsinve** · RFID ICs · QFN-32(5x5)++FSV9563 from Forsinve, in a QFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | TDO | output | Test data output for boundary scan (JTAG) interface. |+| 2 | TDI | input | Test data input for boundary scan (JTAG) interface. |+| 3 | TMS | input | Test mode select for boundary scan (JTAG) interface. |+| 4 | TCK | input | Test clock for boundary scan (JTAG) interface. |+| 5 | SIGIN | input | Contactless communication interface input signal. |+| 6 | SIGOUT | output | Contactless communication interface output signal. |+| 7 | DVDD | power_in | Digital power supply buffer. Requires an external buffer capacitor; do not connect a supply voltage. |+| 8 | VDD | power_in | Main power supply, 3.0 V to 5.5 V (typ 5 V). |+| 9 | AVDD | power_in | Analog power supply buffer. Requires an external buffer capacitor; do not connect a supply voltage. |+| 10 | AUX1 | output | Auxiliary output; used for analog test signal. |+| 11 | AUX2 | output | Auxiliary output; used for analog test signal. |+| 12 | RXP | input | Receiver input (positive) for the received RF signal from the antenna. |+| 13 | RXN | input | Receiver input (negative) for the received RF signal from the antenna. |+| 14 | VMID | power_out | Internal receiver reference voltage. Requires an external buffer capacitor; do not connect a supply voltage. |+| 15 | TX2 | output | Transmitter output 2; delivers the modulated 13.56 MHz carrier to the antenna matching network. |+| 16 | TVSS | power_in | Transmitter ground; supplies the output stage of TX1 and TX2. |+| 17 | TX1 | output | Transmitter output 1; delivers the modulated 13.56 MHz carrier to the antenna matching network. |+| 18 | TVDD | power_in | Transmitter voltage supply for the TX1/TX2 output stage; 3.0 V to 5.5 V (typ 5 V). |+| 19 | XTAL1 | input | Crystal oscillator input to the inverting amplifier. Also the input for an externally generated clock (fosc = 27.12 MHz). |+| 20 | XTAL2 | output | Crystal oscillator output from the inverting amplifier (27.12 MHz). |+| 21 | PDOWN | input | Power Down input. Drive HIGH to place the device into hard power-down (Ipd ~8 nA). |+| 22 | CLKOUT | output | Clock output derived from the internal PLL/oscillator, available to drive an external host or peripheral. |+| 23 | SCL | output | Dedicated I2C serial clock line for the connection of a Secure Access Module (SAM). |+| 24 | SDA | bidirectional | Dedicated I2C serial data line for the connection of a Secure Access Module (SAM). |+| 25 | PVDD | power_in | Pad power supply; sets the I/O voltage level. Must be equal to or lower than VDD (3.0 V to VDD). |+| 26 | IFSEL0 | input | Host interface selection 0. Combined with IFSEL1 selects the host interface protocol assigned to IF0-IF3 (RS232 UART, SPI, I2C, or I2C-L). |+| 27 | IFSEL1 | input | Host interface selection 1. Combined with IFSEL0 selects the host interface protocol assigned to IF0-IF3 (RS232 UART, SPI, I2C, or I2C-L). |+| 28 | IF0 | bidirectional | Multifunction host interface pin. Function assigned by IFSEL0/IFSEL1: RS232 UART, SPI, I2C or I2C-L. |+| 29 | IF1 | bidirectional | Multifunction host interface pin. Function assigned by IFSEL0/IFSEL1: SPI, I2C or I2C-L. |+| 30 | IF2 | bidirectional | Multifunction host interface pin. Function assigned by IFSEL0/IFSEL1: RS232 UART, SPI, I2C or I2C-L. |+| 31 | IF3 | bidirectional | Multifunction host interface pin. Function assigned by IFSEL0/IFSEL1: RS232 UART, SPI, I2C or I2C-L. |+| 32 | IRQ | output | Interrupt request output; asserted to signal an interrupt event to the host. |+| 33 | VSS | power_in | Ground and central heatsink (exposed pad) connection. Must be soldered to the PCB ground for thermal and electrical grounding. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Forsinve |+| Package | QFN-32(5x5) |+| Category | RF And Wireless |+| Pins | 33 |++## CAD (KiCad official)++- Symbol: `FSV9563`+- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`+- 3D model: QFN-32(5x5) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Forsinve datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589838220533006336) (126 pp, sha256 `afcac6211805fff2`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/fsv9563-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "fsv9563",+  "version": "0.1.0",+  "type": "component",+  "description": "Forsinve RFID ICs, QFN-32(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "rf and wireless",+    "fsv9563"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "fsv9563.kicad_sym",+    "fsv9563.kicad_mod",+    "fsv9563.glb",+    "fsv9563.step",+    "fsv9563.lbr",+    "docs/hero.png",+    "docs/fsv9563-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file