← Commit history

fp6755s6ctr: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·212bb76e85 · ·parent b6a0b9b
1 file changed +62−1
page.json+62−1
@@ -33,5 +33,66 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "FP6755S6CTR",+    "manufacturer": "Fitipower Integrated Tech",+    "package": "SOT-23-6",+    "pin_count": 6,+    "category": "LED Drivers",+    "parts": {+      "symbol": "fp6755s6ctr.kicad_sym",+      "footprint": "fp6755s6ctr.kicad_mod",+      "model_3d": "fp6755s6ctr-etched.glb",+      "model_3d_plain": "fp6755s6ctr.glb",+      "model_3d_step": "fp6755s6ctr-etched.step",+      "model_3d_step_plain": "fp6755s6ctr.step",+      "lbr": "fp6755s6ctr.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "SW",+        "type": "output",+        "description": "Switch node pin. Drain of the internal N-MOS power switch; connect the boost inductor and Schottky diode here. Absolute max 34V; internal RDS(on) ~0.25Ω, current limit ~2A. Minimize trace area to reduce EMI."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Ground pin. Connect directly to the local ground plane, close to the input capacitor return."+      },+      {+        "number": "3",+        "name": "FB",+        "type": "input",+        "description": "Feedback pin. Regulates to a 195mV (typ, 185-205mV) reference by sensing the voltage across the LED current-set resistor from the cathode of the lowest LED to GND. LED current = 195mV / RFB. Absolute max 6V; input bias current -300nA."+      },+      {+        "number": "4",+        "name": "EN",+        "type": "input",+        "description": "Enable and PWM dimming control input. Logic high (>1.4V) enables the device; logic low (<0.3V) forces shutdown. Also accepts a 100Hz-50kHz PWM signal (amplitude >1.5V) for direct LED dimming. Absolute max 6V."+      },+      {+        "number": "5",+        "name": "OVP",+        "type": "input",+        "description": "Over-voltage protection sense input. Monitors the LED string output voltage for open-circuit protection; shuts off switching when VOUT rises above ~29V (28V min). Connect to the top of the LED string (VOUT)."+      },+      {+        "number": "6",+        "name": "VIN",+        "type": "power_in",+        "description": "Input supply pin. Operating range 2.5V to 5.5V (absolute max 6V). Must be locally bypassed with a ceramic capacitor (10µF X5R/X7R typical) close to the pin."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}