← Commit history

fp6715s6ctr: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·88b1eb7c2d · ·parent b13ed15
1 file changed +62−1
page.json+62−1
@@ -33,5 +33,66 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "FP6715S6CTR",+    "manufacturer": "Fitipower Integrated Tech",+    "package": "SOT-23-6",+    "pin_count": 6,+    "category": "DC-DC Converters",+    "parts": {+      "symbol": "fp6715s6ctr.kicad_sym",+      "footprint": "fp6715s6ctr.kicad_mod",+      "model_3d": "fp6715s6ctr-etched.glb",+      "model_3d_plain": "fp6715s6ctr.glb",+      "model_3d_step": "fp6715s6ctr-etched.step",+      "model_3d_step_plain": "fp6715s6ctr.step",+      "lbr": "fp6715s6ctr.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "LX",+        "type": "power_out",+        "description": "Power switching node. Connects to the boost inductor and the internal synchronous rectifier (NMOS to GND / PMOS to OUT). Absolute max VLX = -0.3V to +6.5V."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground return for the power stage and control circuitry. Tie to the common ground plane close to the input/output capacitors."+      },+      {+        "number": "3",+        "name": "FB",+        "type": "input",+        "description": "Voltage feedback input. Connect an external resistor divider from VOUT so that FB regulates to the internal 0.8V (±2%) reference. Typical FB bias current is ~0.01µA; recommended divider low-side ~800kΩ for ~1µA divider current."+      },+      {+        "number": "4",+        "name": "EN",+        "type": "input",+        "description": "Logic-controlled shutdown/enable input. VEN(L) ≤ 0.4V shuts the converter down (load disconnected from input); VEN(H) ≥ 1.4V enables switching. EN input current ~2µA at VIN=3.3V. Do not float."+      },+      {+        "number": "5",+        "name": "OUT",+        "type": "power_out",+        "description": "Output of the internal synchronous rectifier (PMOS drain). Connect to the boost output capacitor and load. OVP threshold ~6V with ~500mV hysteresis; maximum programmable VOUT = 5.25V."+      },+      {+        "number": "6",+        "name": "VIN",+        "type": "power_in",+        "description": "Power supply input pin. Recommended operating range 2.5V to 5.5V (absolute max 6.5V). UVLO rising threshold ~1.85V with 0.2V hysteresis. Bypass with 10µF plus 100nF close to the IC."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}