FM8002A

@@ -32,6 +32,20 @@ FM8002A from Shenzhen Fuman, in a SOP-8. Pinout and pin descriptions extracted f - Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm` - 3D model: SOP-8 (KiCad packages3D, STEP) +## 3D model downloads++Two STEP files. Same geometry, different body top:++| File | Size | Use it when |+|---|---|---|+| [`fm8002a.step`](fm8002a.step) | 122 KB | You want the bare part, or you mark your own boards. |+| [`fm8002a-etched.step`](fm8002a-etched.step) | 1.8 MB | You want the part with `FM8002A` already on it. |++The marking in the etched file is real recessed geometry cut into the solid, not a+texture or a decal: 433 faces against 147 in the bare model. It+survives export, section views, and rendering in any CAD tool, and it drops straight+into KiCad or Fusion with no extra setup.+ ## Provenance  Data extracted from the manufacturer datasheet, not a distributor listing:

@@ -1,6 +1,6 @@ {   "slug": "fm8002a",-  "version": "0.1.0",+  "version": "0.2.0",   "type": "component",   "description": "Shenzhen Fuman Elec Audio Power OpAmps, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "tags": [

@@ -4,7 +4,7 @@   "slug": "fm8002a",   "title": "FM8002A",   "brief": "Shenzhen Fuman Audio Power OpAmps, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.2.0",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -34,13 +34,13 @@         "number": "1",         "name": "SHUTDOWN",         "type": "input",-        "description": "Shutdown control input. Drive high (=VDD) to disable the amplifier and drop supply current to ~4.2\u00b5A; drive low (0V) for normal operation. Requires a valid logic level (do not float); an external pull-up resistor may be used with a single-throw switch to keep it in a defined state."+        "description": "Shutdown control input. Drive high (=VDD) to disable the amplifier and drop supply current to ~4.2µA; drive low (0V) for normal operation. Requires a valid logic level (do not float); an external pull-up resistor may be used with a single-throw switch to keep it in a defined state."       },       {         "number": "2",         "name": "BYPASS",         "type": "passive",-        "description": "Internal bias reference node (VDD/2). Connect a 1.0\u00b5F bypass capacitor from this pin to GND as close as possible to the device to stabilize the internal bias voltage and improve PSRR. Larger CBY further improves PSRR."+        "description": "Internal bias reference node (VDD/2). Connect a 1.0µF bypass capacitor from this pin to GND as close as possible to the device to stabilize the internal bias voltage and improve PSRR. Larger CBY further improves PSRR."       },       {         "number": "3",@@ -52,7 +52,7 @@         "number": "4",         "name": "-IN",         "type": "input",-        "description": "Inverting analog audio input of the first op-amp stage. Closed-loop differential gain is set as AVD = 2\u00d7(Rf/Ri) using an external feedback resistor Rf from VO1 to this pin and an input resistor Ri from the AC-coupled audio source."+        "description": "Inverting analog audio input of the first op-amp stage. Closed-loop differential gain is set as AVD = 2×(Rf/Ri) using an external feedback resistor Rf from VO1 to this pin and an input resistor Ri from the AC-coupled audio source."       },       {         "number": "5",@@ -64,7 +64,7 @@         "number": "6",         "name": "VDD",         "type": "power_in",-        "description": "Positive supply input. Operating range 1.6V to 6V (absolute max 6V). Decouple with a 1.0\u00b5F (tantalum) capacitor to GND close to the pin."+        "description": "Positive supply input. Operating range 1.6V to 6V (absolute max 6V). Decouple with a 1.0µF (tantalum) capacitor to GND close to the pin."       },       {         "number": "7",@@ -150,6 +150,9 @@     "docs/hero.png",     "docs/fm8002a-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"-  ]+    "viewers/footprint.html",+    "pads.json"+  ],+  "description": "Shenzhen Fuman Elec Audio Power OpAmps, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "visibility": "public" }\ No newline at end of file