← Commit history

fm2117l: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·6e70889a9c · ·parent 1b47259
1 file changed +62−1
page.json+62−1
@@ -33,5 +33,66 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "FM2117L",+    "manufacturer": "Shenzhen Fuman",+    "package": "SOT-23-6",+    "pin_count": 6,+    "category": "Battery Management",+    "parts": {+      "symbol": "fm2117l.kicad_sym",+      "footprint": "fm2117l.kicad_mod",+      "model_3d": "fm2117l-etched.glb",+      "model_3d_plain": "fm2117l.glb",+      "model_3d_step": "fm2117l-etched.step",+      "model_3d_step_plain": "fm2117l.step",+      "lbr": "fm2117l.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "DOUT",+        "type": "output",+        "description": "Discharge control output. Connects to the gate (G) of the external discharge control N-MOS transistor Q2. Outputs high (~VDD) in normal state and low (VSS level) when in over-discharge/over-current/short-circuit protection to turn Q2 off."+      },+      {+        "number": "2",+        "name": "VM",+        "type": "input",+        "description": "Charge/discharge current sense input. Connects through a current-limit resistor (typ. 1 kΩ, 2.2 kΩ shown in Fig.3) to the source (S) of external charge-control N-MOS Q1 to sense the voltage drop across Q1+Q2 during charge/discharge. Used for charger detection (VCHG), over-current discharge (VEDI) and battery short (VSHORT) detection."+      },+      {+        "number": "3",+        "name": "COUT",+        "type": "output",+        "description": "Charge control output. Connects to the gate (G) of the external charge control N-MOS transistor Q1. Outputs high (~VDD) in normal state and low (VM level) during over-voltage charge protection to turn Q1 off."+      },+      {+        "number": "4",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection. Pin is left floating (悬空)."+      },+      {+        "number": "5",+        "name": "VDD",+        "type": "power_in",+        "description": "Power supply input. Connect to the positive terminal of the battery through a series resistor R1 (typ. 330 Ω). Requires a 0.1 μF ceramic decoupling capacitor to VSS. Absolute maximum -0.3 V to +10 V; operating range 1.5 V to 10 V."+      },+      {+        "number": "6",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground / power return. Connect to the negative terminal of the battery. Reference for all internal voltage thresholds."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}