← Commit history
Publish 0.1.1
7 files changed
+344−367
README.md+10−10@@ -8,15 +8,15 @@ FDMC3612 from onsemi, in a Power-33. Pinout and pin descriptions extracted from | Pin | Name | Type | Function | |---|---|---|---|-| 1 | S | passive | Source terminal of the N-channel MOSFET, tied with pins 2 and 3 on the package. |-| 2 | S | passive | Source terminal of the N-channel MOSFET, tied with pins 1 and 3 on the package. |-| 3 | S | passive | Source terminal of the N-channel MOSFET, tied with pins 1 and 2 on the package. |-| 4 | G | input | Gate terminal, rated for a maximum gate-to-source voltage of ±20 V, with rDS(on) specified at VGS = 10 V and 6 V. |-| 5 | D | passive | Drain terminal, rated for 100 V drain-to-source and 12 A continuous at TC = 25°C, tied with pins 6 to 8. |-| 6 | D | passive | Drain terminal, rated for 100 V drain-to-source and 12 A continuous at TC = 25°C, tied with pins 5, 7 and 8. |-| 7 | D | passive | Drain terminal, rated for 100 V drain-to-source and 12 A continuous at TC = 25°C, tied with pins 5, 6 and 8. |-| 8 | D | passive | Drain terminal, rated for 100 V drain-to-source and 12 A continuous at TC = 25°C, tied with pins 5 to 7. |-| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |+| 1 | S | passive | Source |+| 2 | S | passive | Source |+| 3 | S | passive | Source |+| 4 | G | input | Gate |+| 5 | D | passive | Drain |+| 6 | D | passive | Drain |+| 7 | D | passive | Drain |+| 8 | D | passive | Drain |+| 9 | D | passive | Drain (exposed drain pad, joined to leads 5-8) | ## Key specifications @@ -83,7 +83,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing: - **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/fdmc3612-d.pdf) (10 pp, sha256 `ca609e5d2a4d1b3d`, retrieved 2026-11-17, tier: manufacturer)-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. [Datasheet PDF](docs/fdmc3612-datasheet.pdf)
fdmc3612-hero.glb⋯ 1 unchanged line ⋯
fdmc3612-hero.overlay.json+273−278@@ -1,283 +1,278 @@ {- "spec": "adom-hero 1.4",- "mpn": "FDMC3612",- "kind": "component + footprint reference art",- "board_use": false,- "plane_z_mm": -0.02,- "units": "metre",- "upAxis": "Z",- "layers": {- "pad_outlines": {- "material": "Footprint pads - teal dashed outlines - 50 percent opacity",- "rgba": [- 0.0,- 0.902,- 0.863,- 0.5- ],- "pads": 9,- "span_mm": 4.625,- "dash_mm": 0.12,- "gap_mm": 0.072,- "pad_stroke_mm": 0.03+ "spec": "adom-hero 1.4",+ "mpn": "FDMC3612",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 9,+ "span_mm": 4.625,+ "dash_mm": 0.12,+ "gap_mm": 0.072,+ "pad_stroke_mm": 0.03+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 1,+ "pin1": {+ "source": "added dot (AI)",+ "pad": "1",+ "center_mm": [+ -0.975,+ 2.05+ ],+ "r_mm": 0.1+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 8,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ } },- "silkscreen": {- "material": "Silkscreen reference lines - 30 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.3- ],- "footprint_items": 1,- "pin1": {- "source": "added dot (AI)",- "pad": "1",- "center_mm": [- -0.975,- 2.05+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.28,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -1.65,+ 1.65,+ -1.66,+ 1.66 ],- "r_mm": 0.1- }- },- "signal_names": {- "material": "Signal names - 50 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.5- ],- "font": "DejaVu Sans Mono",- "labels": 8,- "sides": "top + mirrored underside (single-sided)",- "omitted": null,- "fallback_to_pad_number": 0- }- },- "align": {- "ok": true,- "board_underside": true,- "electrical_pads_without_contact": [],- "mounting_pads_left_out": [],- "centre_offset_mm": 0.0,- "over_pads": true,- "tolerance_mm": 0.28,- "orientation_flipped": false,- "contacts_bbox_mm": [- -1.65,- 1.65,- -1.66,- 1.66- ],- "pads_bbox_mm": [- -1.185,- 1.185,- -1.75,- 1.75- ],- "seating_z_mm": 0.0- },- "sources": {- "glb": "fdmc3612-etched.glb",- "glb_sha256": "69cbe7f27706be01a3923023a1ec85f7b7a26d1fb60f53caf8e0b82af38a993a",- "footprint": "fdmc3612.kicad_mod",- "footprint_sha256": "b2973266c747cf9ba15c3dfee953936a7d6eb78fff7d83c8d091f4451fc9c38a",- "pins": "page.json component.pins",- "pins_sha256": "6365301ff64be75f78390c01346ac8ebc349fce3280d35c096bd9e2a3026b2fe"- },- "generator": "factory/hero_glb.py",- "labels": [- {- "pad": "1",- "text": "S",- "x": -1.795,- "y": 1.4,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "2",- "text": "S",- "x": -0.325,- "y": 1.85,- "align": "right",- "vertical": true,- "h": 0.325- },- {- "pad": "3",- "text": "S",- "x": 0.325,- "y": 1.85,- "align": "right",- "vertical": true,- "h": 0.325- },- {- "pad": "4",- "text": "G",- "x": 1.335,- "y": 1.4,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "5",- "text": "D",- "x": 1.335,- "y": -1.525,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "6",- "text": "D",- "x": 0.325,- "y": -1.85,- "align": "left",- "vertical": true,- "h": 0.325- },- {- "pad": "7",- "text": "D",- "x": -0.325,- "y": -1.85,- "align": "left",- "vertical": true,- "h": 0.325- },- {- "pad": "8",- "text": "D",- "x": -1.335,- "y": -1.525,- "align": "right",- "vertical": false,- "h": 0.6- }- ],- "pads": [- {- "number": "1",- "shape": "rect",- "center_mm": [- -0.975,- 1.4- ],- "size_mm": [- 0.42,- 0.7- ],- "rot": 0.0- },- {- "number": "2",- "shape": "rect",- "center_mm": [- -0.325,- 1.4- ],- "size_mm": [- 0.42,- 0.7- ],- "rot": 0.0- },- {- "number": "3",- "shape": "rect",- "center_mm": [- 0.325,- 1.4- ],- "size_mm": [- 0.42,- 0.7- ],- "rot": 0.0- },- {- "number": "4",- "shape": "rect",- "center_mm": [- 0.975,- 1.4- ],- "size_mm": [- 0.42,- 0.7- ],- "rot": 0.0- },- {- "number": "5",- "shape": "rect",- "center_mm": [- 0.975,- -1.525- ],- "size_mm": [- 0.42,- 0.45- ],- "rot": 0.0- },- {- "number": "6",- "shape": "rect",- "center_mm": [- 0.325,- -1.525- ],- "size_mm": [- 0.42,- 0.45- ],- "rot": 0.0- },- {- "number": "7",- "shape": "rect",- "center_mm": [- -0.325,- -1.525- ],- "size_mm": [- 0.42,- 0.45- ],- "rot": 0.0+ "pads_bbox_mm": [+ -1.185,+ 1.185,+ -1.75,+ 1.75+ ],+ "seating_z_mm": 0.0 },- {- "number": "8",- "shape": "rect",- "center_mm": [- -0.975,- -1.525- ],- "size_mm": [- 0.42,- 0.45- ],- "rot": 0.0+ "sources": {+ "glb": "fdmc3612-etched.glb",+ "glb_sha256": "69cbe7f27706be01a3923023a1ec85f7b7a26d1fb60f53caf8e0b82af38a993a",+ "footprint": "fdmc3612.kicad_mod",+ "footprint_sha256": "b2973266c747cf9ba15c3dfee953936a7d6eb78fff7d83c8d091f4451fc9c38a",+ "pins": "page.json component.pins",+ "pins_sha256": "2ff8a1c047935607117bd43e9a097724924557864e5b6c969bb779aa30329b73" },- {- "number": "9",- "shape": "rect",- "center_mm": [- 0.0,- -0.45- ],- "size_mm": [- 2.37,- 1.7- ],- "rot": 0.0- }- ]-}+ "generator": "adom-wiki 1.8.25 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "S",+ "x": -1.795,+ "y": 1.4,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "S",+ "x": -0.325,+ "y": 1.85,+ "align": "right",+ "vertical": true,+ "h": 0.325+ },+ {+ "pad": "3",+ "text": "S",+ "x": 0.325,+ "y": 1.85,+ "align": "right",+ "vertical": true,+ "h": 0.325+ },+ {+ "pad": "4",+ "text": "G",+ "x": 1.335,+ "y": 1.4,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "5",+ "text": "D",+ "x": 1.335,+ "y": -1.525,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "6",+ "text": "D",+ "x": 0.325,+ "y": -1.85,+ "align": "left",+ "vertical": true,+ "h": 0.325+ },+ {+ "pad": "7",+ "text": "D",+ "x": -0.325,+ "y": -1.85,+ "align": "left",+ "vertical": true,+ "h": 0.325+ },+ {+ "pad": "8",+ "text": "D",+ "x": -1.335,+ "y": -1.525,+ "align": "right",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "rect",+ "center_mm": [+ -0.975,+ 1.4+ ],+ "size_mm": [+ 0.42,+ 0.7+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "rect",+ "center_mm": [+ -0.325,+ 1.4+ ],+ "size_mm": [+ 0.42,+ 0.7+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "rect",+ "center_mm": [+ 0.325,+ 1.4+ ],+ "size_mm": [+ 0.42,+ 0.7+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "rect",+ "center_mm": [+ 0.975,+ 1.4+ ],+ "size_mm": [+ 0.42,+ 0.7+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "rect",+ "center_mm": [+ 0.975,+ -1.525+ ],+ "size_mm": [+ 0.42,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "rect",+ "center_mm": [+ 0.325,+ -1.525+ ],+ "size_mm": [+ 0.42,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "rect",+ "center_mm": [+ -0.325,+ -1.525+ ],+ "size_mm": [+ 0.42,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "rect",+ "center_mm": [+ -0.975,+ -1.525+ ],+ "size_mm": [+ 0.42,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "rect",+ "center_mm": [+ 0.0,+ -0.45+ ],+ "size_mm": [+ 2.37,+ 1.7+ ],+ "rot": 0.0+ }+ ]+}
fdmc3612.kicad_sym+1−1@@ -29,7 +29,7 @@ (number "5" (effects (font (size 1.27 1.27)))) ) (pin passive line (at 17.78 2.54 180) (length 5.08)- (name "EP" (effects (font (size 1.27 1.27))))+ (name "D" (effects (font (size 1.27 1.27)))) (number "9" (effects (font (size 1.27 1.27)))) ) (pin passive line (at 17.78 0.00 180) (length 5.08)
fdmc3612.lbr+22−11@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>onsemi MOSFETs, Power-33. Pinout cross-checked by two models against the datasheet</description> <packages> <package name="onsemi_FDMC3612_394866"> <description>9 pads, 2.4 x 3.5 mm. Generated from the onsemi datasheet land pattern (family R1719, spec 3948667d81)</description>@@ -74,6 +74,7 @@ </packages> <symbols> <symbol name="FDMC3612">+ <description>onsemi MOSFETs, Power-33. Pinout cross-checked by two models against the datasheet</description> <wire x1="-12.7" y1="7.62" x2="12.7" y2="7.62" width="0.254" layer="94"/> <wire x1="12.7" y1="7.62" x2="12.7" y2="-7.62" width="0.254" layer="94"/> <wire x1="12.7" y1="-7.62" x2="-12.7" y2="-7.62" width="0.254" layer="94"/>@@ -85,15 +86,15 @@ <pin name="S@3" x="-17.78" y="0" length="middle" direction="pas"/> <pin name="G" x="-17.78" y="-2.54" length="middle" direction="in"/> <pin name="D" x="-17.78" y="-5.08" length="middle" direction="pas"/>- <pin name="EP" x="17.78" y="2.54" length="middle" direction="pas" rot="R180"/>- <pin name="D@2" x="17.78" y="0" length="middle" direction="pas" rot="R180"/>- <pin name="D@3" x="17.78" y="-2.54" length="middle" direction="pas" rot="R180"/>- <pin name="D@4" x="17.78" y="-5.08" length="middle" direction="pas" rot="R180"/>+ <pin name="D@2" x="17.78" y="2.54" length="middle" direction="pas" rot="R180"/>+ <pin name="D@3" x="17.78" y="0" length="middle" direction="pas" rot="R180"/>+ <pin name="D@4" x="17.78" y="-2.54" length="middle" direction="pas" rot="R180"/>+ <pin name="D@5" x="17.78" y="-5.08" length="middle" direction="pas" rot="R180"/> </symbol> </symbols> <devicesets> <deviceset name="FDMC3612" prefix="U">- <description></description>+ <description>onsemi MOSFETs, Power-33. Pinout cross-checked by two models against the datasheet</description> <gates> <gate name="G$1" symbol="FDMC3612" x="0" y="0"/> </gates>@@ -105,12 +106,22 @@ <connect gate="G$1" pin="S@3" pad="3"/> <connect gate="G$1" pin="G" pad="4"/> <connect gate="G$1" pin="D" pad="5"/>- <connect gate="G$1" pin="EP" pad="9"/>- <connect gate="G$1" pin="D@2" pad="8"/>- <connect gate="G$1" pin="D@3" pad="7"/>- <connect gate="G$1" pin="D@4" pad="6"/>+ <connect gate="G$1" pin="D@2" pad="9"/>+ <connect gate="G$1" pin="D@3" pad="8"/>+ <connect gate="G$1" pin="D@4" pad="7"/>+ <connect gate="G$1" pin="D@5" pad="6"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="FDMC3612" constant="no"/>+ <attribute name="MANUFACTURER" value="onsemi" constant="no"/>+ <attribute name="DATASHEET" value="https://www.onsemi.com/pdf/datasheet/fdmc3612-d.pdf" constant="no"/>+ <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/fdmc3612" constant="no"/>+ <attribute name="MOUSER_PN" value="512-FDMC3612" constant="no"/>+ <attribute name="DIGIKEY_PN" value="FDMC3612CT-ND" constant="no"/>+ <attribute name="LCSC_PN" value="C455160" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>
package.json+15−31@@ -1,8 +1,8 @@ { "slug": "fdmc3612",- "version": "0.1.0",+ "version": "0.1.1", "type": "component",- "description": "onsemi MOSFETs, Power-33. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "description": "onsemi MOSFETs, Power-33. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.", "tags": [ "component", "transistors-thyristors",@@ -53,7 +53,7 @@ "mouser": "512-FDMC3612" }, "distributor_check": {- "checked_at": "2026-11-17T16:02:17Z",+ "checked_at": "2026-11-17T16:06:06Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "FDMC3612CT-ND",@@ -69,75 +69,59 @@ "number": "1", "name": "S", "type": "passive",- "description": "Source terminal of the N-channel MOSFET, tied with pins 2 and 3 on the package."+ "description": "Source" }, { "number": "2", "name": "S", "type": "passive",- "description": "Source terminal of the N-channel MOSFET, tied with pins 1 and 3 on the package."+ "description": "Source" }, { "number": "3", "name": "S", "type": "passive",- "description": "Source terminal of the N-channel MOSFET, tied with pins 1 and 2 on the package."+ "description": "Source" }, { "number": "4", "name": "G", "type": "input",- "description": "Gate terminal, rated for a maximum gate-to-source voltage of ±20 V, with rDS(on) specified at VGS = 10 V and 6 V."+ "description": "Gate" }, { "number": "5", "name": "D", "type": "passive",- "description": "Drain terminal, rated for 100 V drain-to-source and 12 A continuous at TC = 25°C, tied with pins 6 to 8."+ "description": "Drain" }, { "number": "6", "name": "D", "type": "passive",- "description": "Drain terminal, rated for 100 V drain-to-source and 12 A continuous at TC = 25°C, tied with pins 5, 7 and 8."+ "description": "Drain" }, { "number": "7", "name": "D", "type": "passive",- "description": "Drain terminal, rated for 100 V drain-to-source and 12 A continuous at TC = 25°C, tied with pins 5, 6 and 8."+ "description": "Drain" }, { "number": "8", "name": "D", "type": "passive",- "description": "Drain terminal, rated for 100 V drain-to-source and 12 A continuous at TC = 25°C, tied with pins 5 to 7."+ "description": "Drain" }, { "number": "9",- "name": "EP",+ "name": "D", "type": "passive",- "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ "description": "Drain (exposed drain pad, joined to leads 5-8)" } ], "provenance": {- "extractor": "extract_pins 0.3",- "factory_chain": {- "factory": "2.0.0",- "extractor": "extract_pins 0.3",- "primary_model": "claude-sonnet-5-5",- "primary_mode": "text",- "consensus_model": "claude-opus-5-5",- "consensus": "agreed",- "guards": "pin_guards 0.1: passed",- "guard_notes": [- "extractor flagged: The datasheet lists two case outlines for this package, 511DQ and 511DR, both WDFN8 3.3x3.3 0.65P. F; Pin types are inferred from the pin assignment diagram. A MOSFET's source and drain are mapped to pa",- "exposed pad 9 added from the footprint"- ],- "pages_sent": 10,- "cost_usd": 0.1376,- "at": "2026-11-17T16:02:09"- },+ "extractor": "ds2sf", "datasheet": { "url": "https://www.onsemi.com/pdf/datasheet/fdmc3612-d.pdf", "pages": 10,@@ -191,7 +175,7 @@ "zmin_mm": 0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "3642e6a13112a05a1557665f06d95b4e4a0a8996324b0f7350f9d40f51fe1ac6",+ "sha256": "ddb48b7a5dc3737e369b5e4af4cca0716947f21b44c63c9dbc62adcdda12f32c", "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }
page.json+23−36@@ -4,7 +4,7 @@ "slug": "fdmc3612", "title": "FDMC3612", "brief": "onsemi MOSFETs, Power-33. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -36,7 +36,7 @@ "mouser": "512-FDMC3612" }, "distributor_check": {- "checked_at": "2026-11-17T16:02:17Z",+ "checked_at": "2026-11-17T16:06:06Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "FDMC3612CT-ND",@@ -52,75 +52,59 @@ "number": "1", "name": "S", "type": "passive",- "description": "Source terminal of the N-channel MOSFET, tied with pins 2 and 3 on the package."+ "description": "Source" }, { "number": "2", "name": "S", "type": "passive",- "description": "Source terminal of the N-channel MOSFET, tied with pins 1 and 3 on the package."+ "description": "Source" }, { "number": "3", "name": "S", "type": "passive",- "description": "Source terminal of the N-channel MOSFET, tied with pins 1 and 2 on the package."+ "description": "Source" }, { "number": "4", "name": "G", "type": "input",- "description": "Gate terminal, rated for a maximum gate-to-source voltage of ±20 V, with rDS(on) specified at VGS = 10 V and 6 V."+ "description": "Gate" }, { "number": "5", "name": "D", "type": "passive",- "description": "Drain terminal, rated for 100 V drain-to-source and 12 A continuous at TC = 25°C, tied with pins 6 to 8."+ "description": "Drain" }, { "number": "6", "name": "D", "type": "passive",- "description": "Drain terminal, rated for 100 V drain-to-source and 12 A continuous at TC = 25°C, tied with pins 5, 7 and 8."+ "description": "Drain" }, { "number": "7", "name": "D", "type": "passive",- "description": "Drain terminal, rated for 100 V drain-to-source and 12 A continuous at TC = 25°C, tied with pins 5, 6 and 8."+ "description": "Drain" }, { "number": "8", "name": "D", "type": "passive",- "description": "Drain terminal, rated for 100 V drain-to-source and 12 A continuous at TC = 25°C, tied with pins 5 to 7."+ "description": "Drain" }, { "number": "9",- "name": "EP",+ "name": "D", "type": "passive",- "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ "description": "Drain (exposed drain pad, joined to leads 5-8)" } ], "provenance": {- "extractor": "extract_pins 0.3",- "factory_chain": {- "factory": "2.0.0",- "extractor": "extract_pins 0.3",- "primary_model": "claude-sonnet-5-5",- "primary_mode": "text",- "consensus_model": "claude-opus-5-5",- "consensus": "agreed",- "guards": "pin_guards 0.1: passed",- "guard_notes": [- "extractor flagged: The datasheet lists two case outlines for this package, 511DQ and 511DR, both WDFN8 3.3x3.3 0.65P. F; Pin types are inferred from the pin assignment diagram. A MOSFET's source and drain are mapped to pa",- "exposed pad 9 added from the footprint"- ],- "pages_sent": 10,- "cost_usd": 0.1376,- "at": "2026-11-17T16:02:09"- },+ "extractor": "ds2sf", "datasheet": { "url": "https://www.onsemi.com/pdf/datasheet/fdmc3612-d.pdf", "pages": 10,@@ -152,8 +136,8 @@ 3.32, 0.75 ],- "zmin_mm": 0.0,- "centre_offset_mm": 0.0,+ "zmin_mm": 0,+ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "a90e4ac2fa5e5ca8ffa4fe1387818e232eb0411561347a18b93f180d01f5cb23", "checked": "2026-11-17",@@ -171,10 +155,10 @@ 3.32, 0.75 ],- "zmin_mm": 0.0,- "centre_offset_mm": 0.0,+ "zmin_mm": 0,+ "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "3642e6a13112a05a1557665f06d95b4e4a0a8996324b0f7350f9d40f51fe1ac6",+ "sha256": "ddb48b7a5dc3737e369b5e4af4cca0716947f21b44c63c9dbc62adcdda12f32c", "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }@@ -674,5 +658,8 @@ "viewers/footprint.html", "fdmc3612-hero.glb", "fdmc3612-hero.overlay.json"- ]-}+ ],+ "description": "onsemi MOSFETs, Power-33. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",+ "visibility": "private",+ "org": "adom"+}