← Commit history

Initial commit: component/fdc1004dgsr

Ray ·d371e63ead ·
2 files changed +88
README.mdadded+54
@@ -0,0 +1,54 @@+# FDC1004DGSR++**Texas Instruments** · Touch Sensors · MSOP-10++FDC1004DGSR from Texas Instruments, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SHLD1 | output | Capacitive Input Active AC Shielding driver output. Drives a shield conductor synchronously with the excitation signal to reduce parasitic capacitance and EMI on the CIN sensor lines. Drive capability up to 400 pF at 25 kHz. |+| 2 | CIN1 | input | Capacitive Input channel 1. The measured capacitance is connected between the CIN1 pin and GND. If not used, leave this pin as an open circuit. Input conversion range ±15 pF with up to 100 pF offset capacitance. |+| 3 | CIN2 | input | Capacitive Input channel 2. The measured capacitance is connected between the CIN2 pin and GND. If not used, leave this pin as an open circuit. |+| 4 | CIN3 | input | Capacitive Input channel 3. The measured capacitance is connected between the CIN3 pin and GND. If not used, leave this pin as an open circuit. |+| 5 | CIN4 | input | Capacitive Input channel 4. The measured capacitance is connected between the CIN4 pin and GND. If not used, leave this pin as an open circuit. |+| 6 | SHLD2 | output | Capacitive Input Active AC Shielding driver output. Second shield driver synchronous with excitation. Drive capability up to 400 pF at 25 kHz. |+| 7 | GND | power_in | Device ground reference. Must always be connected to system ground. |+| 8 | VDD | power_in | Power supply voltage input, 3.0-3.6 V (3.3 V nominal). Decouple this pin to GND with a low-impedance capacitor, for example a 1 µF tantalum in combination with a 0.1 µF multilayer ceramic. |+| 9 | SCL | input | I2C serial clock input. Connects to the controller clock line. Requires an external pull-up resistor to VDD if not already provided elsewhere. Supports standard/fast mode up to 400 kHz. |+| 10 | SDA | bidirectional | I2C bidirectional serial data line. Connects to the controller data line. Requires an external pull-up resistor to VDD if not already provided elsewhere. Open-drain output. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | MSOP-10 |+| Category | Sensors |+| Pins | 10 |++## Ordering variants++Same part, different packaging or reel option.++- `FDC1004DGSR`+- `FDC1004DGSRDSCR`+- `FDC1004DGSRDSC`++## CAD (KiCad official)++- Symbol: `FDC1004DGSR`+- Footprint: `Package_SO:MSOP-10_3x3mm_P0.5mm`+- 3D model: MSOP-10 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/fdc1004) (36 pp, sha256 `d197ccb9a19b0637`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/fdc1004dgsr-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "fdc1004dgsr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Touch Sensors, MSOP-10. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "sensors",+    "fdc1004dgsr"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "fdc1004dgsr.kicad_sym",+    "fdc1004dgsr.kicad_mod",+    "fdc1004dgsr.glb",+    "fdc1004dgsr.step",+    "fdc1004dgsr.lbr",+    "docs/hero.png",+    "docs/fdc1004dgsr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file