← Commit history

f280025ptsr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·a61b788018 · ·parent 0abe438
2 files changed +89−9
package.json+47−7
@@ -80,7 +80,7 @@         "number": "3",         "name": "XRSn",         "type": "bidirectional",-        "description": "Device Reset input and Watchdog Reset output, open-drain with internal pull-up; 2.2k\u03a9 to 10k\u03a9 external pull-up recommended with optional 100nF noise filter capacitor to VSS"+        "description": "Device Reset input and Watchdog Reset output, open-drain with internal pull-up; 2.2kΩ to 10kΩ external pull-up recommended with optional 100nF noise filter capacitor to VSS"       },       {         "number": "4",@@ -92,7 +92,7 @@         "number": "5",         "name": "A3/C5/VDAC",         "type": "input",-        "description": "ADC-A Input 3 / ADC-C Input 5 / Optional external reference voltage for on-chip CMPSS DAC; internal capacitor (connected to VSSA) requires minimum 1\u00b5F external capacitor if used as DAC reference"+        "description": "ADC-A Input 3 / ADC-C Input 5 / Optional external reference voltage for on-chip CMPSS DAC; internal capacitor (connected to VSSA) requires minimum 1µF external capacitor if used as DAC reference"       },       {         "number": "6",@@ -134,7 +134,7 @@         "number": "12",         "name": "VREFHI",         "type": "input",-        "description": "ADC High Reference Voltage (external or internally generated); 2.2\u00b5F minimum capacitor required between VREFHI and VREFLO placed as close to device as possible"+        "description": "ADC High Reference Voltage (external or internally generated); 2.2µF minimum capacitor required between VREFHI and VREFLO placed as close to device as possible"       },       {         "number": "13",@@ -170,7 +170,7 @@         "number": "18",         "name": "VDDA",         "type": "power_in",-        "description": "3.3V Analog Power Supply; minimum 2.2\u00b5F decoupling capacitor required on each pin"+        "description": "3.3V Analog Power Supply; minimum 2.2µF decoupling capacitor required on each pin"       },       {         "number": "19",@@ -242,7 +242,7 @@         "number": "30",         "name": "TMS",         "type": "bidirectional",-        "description": "JTAG Test Mode Select input with internal pull-up resistor; external 2.2k\u03a9 pull-up to VDDIO recommended for normal operation"+        "description": "JTAG Test Mode Select input with internal pull-up resistor; external 2.2kΩ pull-up to VDDIO recommended for normal operation"       },       {         "number": "31",@@ -387,6 +387,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "f280025ptsr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          9.0,+          9.0,+          1.5+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "9dea352d93177c2904afd7d7b68ea8855ce1ab691f69f8b3e13655600514b6bf",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "f280025ptsr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          9.0,+          9.0,+          1.5+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "ccd0aaa41c27e2ce0832448fd4750e2215b14742c4e216532fbc686544c46129",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -372,7 +372,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "f280025ptsr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          9.0,+          9.0,+          1.5+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "9dea352d93177c2904afd7d7b68ea8855ce1ab691f69f8b3e13655600514b6bf",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "f280025ptsr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          9.0,+          9.0,+          1.5+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "ccd0aaa41c27e2ce0832448fd4750e2215b14742c4e216532fbc686544c46129",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -419,4 +459,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}