component
eV1527
Public Made by Adomby adom
Vollgo Signal Switches / Encoders & Decoders / Multiplexers, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+7−4@@ -32,13 +32,13 @@ "number": "1", "name": "OSC", "type": "passive",- "description": "Oscillator resistor input. Connect an external resistor (recommended 330 k\u03a9) from this pin to VCC to set the internal oscillator frequency (typ. Fop = 80 kHz). Timing/delay varies with Rosc per the datasheet resistor table."+ "description": "Oscillator resistor input. Connect an external resistor (recommended 330 kΩ) from this pin to VCC to set the internal oscillator frequency (typ. Fop = 80 kHz). Timing/delay varies with Rosc per the datasheet resistor table." }, { "number": "2", "name": "VCC", "type": "power_in",- "description": "Positive supply rail. Operating range 3.0 V to 13 V (absolute max 14 V). Operating current ~0.5 mA typ; static current <1.0 \u00b5A (OSC stopped, output unloaded)."+ "description": "Positive supply rail. Operating range 3.0 V to 13 V (absolute max 14 V). Operating current ~0.5 mA typ; static current <1.0 µA (OSC stopped, output unloaded)." }, { "number": "3",@@ -50,7 +50,7 @@ "number": "4", "name": "TXD", "type": "output",- "description": "Serial encoded data output. Transmits the sync bit, the 20-bit pre-burned ID code (C0-C19) and the 4 data bits (D0-D3) mapped from K0-K3. Source current Ioh \u2265 5 mA and sink current Iol \u2265 3 mA at VCC=12 V, VO=6 V."+ "description": "Serial encoded data output. Transmits the sync bit, the 20-bit pre-burned ID code (C0-C19) and the 4 data bits (D0-D3) mapped from K0-K3. Source current Ioh ≥ 5 mA and sink current Iol ≥ 3 mA at VCC=12 V, VO=6 V." }, { "number": "5",@@ -138,5 +138,8 @@ "docs/ev1527-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }