component
EUP3482ADIR1
Public Made by Adomby adom
Eutech Microelectronics DC-DC Converters, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+10−7@@ -32,19 +32,19 @@ "number": "1", "name": "IN", "type": "power_in",- "description": "Input supply pin. Operating range 4.5V to 30V (35V surge tolerant). Bypass locally to GND with a low-ESR ceramic capacitor (10\u00b5F in the typical application)."+ "description": "Input supply pin. Operating range 4.5V to 30V (35V surge tolerant). Bypass locally to GND with a low-ESR ceramic capacitor (10µF in the typical application)." }, { "number": "2", "name": "EN", "type": "input",- "description": "Enable input. Logic high enables the regulator; logic low places the part in shutdown (draws ~1\u00b5A from IN). Can be tied to IN through a resistor divider to program input UVLO."+ "description": "Enable input. Logic high enables the regulator; logic low places the part in shutdown (draws ~1µA from IN). Can be tied to IN through a resistor divider to program input UVLO." }, { "number": "3", "name": "SS", "type": "input",- "description": "Programmable soft-start pin. An external capacitor to GND (0.1\u00b5F typical, optional) sets the soft-start ramp time to limit inrush current and output overshoot at startup."+ "description": "Programmable soft-start pin. An external capacitor to GND (0.1µF typical, optional) sets the soft-start ramp time to limit inrush current and output overshoot at startup." }, { "number": "4",@@ -56,19 +56,19 @@ "number": "5", "name": "COMP", "type": "output",- "description": "Error-amplifier output / loop compensation node. Connect an external R-C (typ. 2.2k\u03a9 + 3.3nF) to GND to compensate the current-mode control loop."+ "description": "Error-amplifier output / loop compensation node. Connect an external R-C (typ. 2.2kΩ + 3.3nF) to GND to compensate the current-mode control loop." }, { "number": "6", "name": "FB", "type": "input",- "description": "Feedback input to the error amplifier. Internal reference ~0.923V; set output voltage with a resistor divider from VOUT to FB to GND (e.g. 26.1k\u03a9/10k\u03a9 for 3.3V, 44.2k\u03a9/10k\u03a9 for 5V)."+ "description": "Feedback input to the error amplifier. Internal reference ~0.923V; set output voltage with a resistor divider from VOUT to FB to GND (e.g. 26.1kΩ/10kΩ for 3.3V, 44.2kΩ/10kΩ for 5V)." }, { "number": "7", "name": "SW", "type": "output",- "description": "Switch node - the source of the internal high-side DMOS and drain of the internal low-side DMOS. Connect the external inductor (10\u00b5H typical) from SW to the output."+ "description": "Switch node - the source of the internal high-side DMOS and drain of the internal low-side DMOS. Connect the external inductor (10µH typical) from SW to the output." }, { "number": "8",@@ -144,5 +144,8 @@ "docs/eup3482adir1-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }