component
ES8316
Public Made by Adomby adom
Everest semi Everest Semiconductor ADCs/DACs - Special Purpose, QFN-32-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+69@@ -0,0 +1,69 @@+# ES8316++**Everest semi Everest Semiconductor** · ADCs/DACs - Special Purpose · QFN-32-EP(4x4)++ES8316 from Everest semi Everest Semiconductor, in a QFN-32-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CCLK | input | I²C clock input for serial configuration interface; SCL line, 400 kbps maximum |+| 2 | MCLK | input | Master clock input; supports 256/384Fs audio clocks and 12/24 MHz USB clocks |+| 3 | DVDD | power_in | Digital core supply voltage; recommended range 1.6V to 3.6V |+| 4 | PVDD | power_in | Digital IO supply voltage; recommended range 1.6V to 3.6V |+| 5 | DGND | power_in | Digital ground reference |+| 6 | SCLK | bidirectional | Serial audio bit clock; master/slave mode selectable, maximum frequency 26 MHz |+| 7 | DSDIN | input | DAC serial data input for I²S/PCM audio formats |+| 8 | DLRCK | bidirectional | DAC left/right clock signal for frame synchronization, maximum frequency 200 kHz |+| 9 | ASDOUT | output | ADC serial data output; 24-bit 92 dB SNR audio data |+| 10 | GPIO1 | bidirectional | Configurable general purpose input/output pin |+| 11 | GPIO2 | bidirectional | Configurable general purpose input/output pin |+| 12 | GPIO3 | bidirectional | Configurable general purpose input/output pin |+| 13 | CPVSSP | passive | Charge pump supply filter pin; connect to 1µF decoupling capacitor |+| 14 | CPVDD | power_in | Charge pump power supply; recommended 1.6V to 2.0V |+| 15 | CPTOP | passive | Charge pump upper capacitor terminal; external 1µF capacitor required |+| 16 | CPBOT | passive | Charge pump lower capacitor terminal; external 1µF capacitor required |+| 17 | CPGND | power_in | Charge pump ground reference |+| 18 | CPGNDREF | passive | Charge pump ground reference filter pin; must connect to analog ground at headphone output |+| 19 | ROUT | output | Right analog output; 93 dB SNR ground-centered headphone driver |+| 20 | LOUT | output | Left analog output; 93 dB SNR ground-centered headphone driver |+| 21 | DACVREF | output | DAC reference voltage output; requires 1µF decoupling capacitor to ground |+| 22 | AVDD | power_in | Analog supply voltage; recommended range 2.0V to 3.6V |+| 23 | AGND | power_in | Analog ground reference |+| 24 | ADCVREF | output | ADC reference voltage output; requires 1µF decoupling capacitor to ground |+| 25 | VMID | output | Mid-supply reference output (AVDD/2); requires 1µF decoupling capacitor for stability |+| 26 | MICBIAS | output | Microphone bias output for electret microphone elements |+| 27 | RIN2 | input | Right input channel 2; 20 kΩ input impedance |+| 28 | LIN2 | input | Left input channel 2; 20 kΩ input impedance |+| 29 | RIN1 | input | Right input channel 1; 20 kΩ input impedance |+| 30 | LIN1 | input | Left input channel 1; 20 kΩ input impedance |+| 31 | CE | input | I²C chip address select; pull low for address 0x10, high for address 0x11 |+| 32 | CDATA | bidirectional | I²C data line; open-drain bidirectional interface, 400 kbps maximum |+| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Everest semi Everest Semiconductor |+| Package | QFN-32-EP(4x4) |+| Category | Data Acquisition |+| Pins | 33 |++## CAD (KiCad official)++- Symbol: `ES8316`+- Footprint: `Package_DFN_QFN:QFN-32-1EP_4x4mm_P0.4mm_EP2.9x2.9mm`+- 3D model: QFN-32-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `es8316-etched.step` / `es8316-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `es8316.step` / `es8316.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Everest semi Everest Semiconductor datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588883895215394816) (12 pp, sha256 `87fd94615aea6f5c`, retrieved 2026-09-17, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/es8316-datasheet.pdf)
page.jsonadded+294@@ -0,0 +1,294 @@+{+ "slug": "es8316",+ "version": "0.1.0",+ "type": "component",+ "description": "Everest semi Everest Semiconductor ADCs/DACs - Special Purpose, QFN-32-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "data acquisition",+ "es8316",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "es8316.kicad_sym",+ "es8316.kicad_mod",+ "es8316.glb",+ "es8316.step",+ "es8316.lbr",+ "docs/hero.png",+ "docs/es8316-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "ES8316",+ "manufacturer": "Everest semi Everest Semiconductor",+ "package": "QFN-32-EP(4x4)",+ "pin_count": 33,+ "category": "Data Acquisition",+ "subcategory": "ADCs/DACs - Special Purpose",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588883895215394816",+ "parts": {+ "symbol": "es8316.kicad_sym",+ "footprint": "es8316.kicad_mod",+ "model_3d": "es8316-etched.glb",+ "model_3d_plain": "es8316.glb",+ "model_3d_step": "es8316-etched.step",+ "model_3d_step_plain": "es8316.step",+ "lbr": "es8316.lbr"+ },+ "distributor_links": {+ "lcsc": "C365735"+ },+ "pins": [+ {+ "number": "1",+ "name": "CCLK",+ "type": "input",+ "description": "I²C clock input for serial configuration interface; SCL line, 400 kbps maximum"+ },+ {+ "number": "2",+ "name": "MCLK",+ "type": "input",+ "description": "Master clock input; supports 256/384Fs audio clocks and 12/24 MHz USB clocks"+ },+ {+ "number": "3",+ "name": "DVDD",+ "type": "power_in",+ "description": "Digital core supply voltage; recommended range 1.6V to 3.6V"+ },+ {+ "number": "4",+ "name": "PVDD",+ "type": "power_in",+ "description": "Digital IO supply voltage; recommended range 1.6V to 3.6V"+ },+ {+ "number": "5",+ "name": "DGND",+ "type": "power_in",+ "description": "Digital ground reference"+ },+ {+ "number": "6",+ "name": "SCLK",+ "type": "bidirectional",+ "description": "Serial audio bit clock; master/slave mode selectable, maximum frequency 26 MHz"+ },+ {+ "number": "7",+ "name": "DSDIN",+ "type": "input",+ "description": "DAC serial data input for I²S/PCM audio formats"+ },+ {+ "number": "8",+ "name": "DLRCK",+ "type": "bidirectional",+ "description": "DAC left/right clock signal for frame synchronization, maximum frequency 200 kHz"+ },+ {+ "number": "9",+ "name": "ASDOUT",+ "type": "output",+ "description": "ADC serial data output; 24-bit 92 dB SNR audio data"+ },+ {+ "number": "10",+ "name": "GPIO1",+ "type": "bidirectional",+ "description": "Configurable general purpose input/output pin"+ },+ {+ "number": "11",+ "name": "GPIO2",+ "type": "bidirectional",+ "description": "Configurable general purpose input/output pin"+ },+ {+ "number": "12",+ "name": "GPIO3",+ "type": "bidirectional",+ "description": "Configurable general purpose input/output pin"+ },+ {+ "number": "13",+ "name": "CPVSSP",+ "type": "passive",+ "description": "Charge pump supply filter pin; connect to 1µF decoupling capacitor"+ },+ {+ "number": "14",+ "name": "CPVDD",+ "type": "power_in",+ "description": "Charge pump power supply; recommended 1.6V to 2.0V"+ },+ {+ "number": "15",+ "name": "CPTOP",+ "type": "passive",+ "description": "Charge pump upper capacitor terminal; external 1µF capacitor required"+ },+ {+ "number": "16",+ "name": "CPBOT",+ "type": "passive",+ "description": "Charge pump lower capacitor terminal; external 1µF capacitor required"+ },+ {+ "number": "17",+ "name": "CPGND",+ "type": "power_in",+ "description": "Charge pump ground reference"+ },+ {+ "number": "18",+ "name": "CPGNDREF",+ "type": "passive",+ "description": "Charge pump ground reference filter pin; must connect to analog ground at headphone output"+ },+ {+ "number": "19",+ "name": "ROUT",+ "type": "output",+ "description": "Right analog output; 93 dB SNR ground-centered headphone driver"+ },+ {+ "number": "20",+ "name": "LOUT",+ "type": "output",+ "description": "Left analog output; 93 dB SNR ground-centered headphone driver"+ },+ {+ "number": "21",+ "name": "DACVREF",+ "type": "output",+ "description": "DAC reference voltage output; requires 1µF decoupling capacitor to ground"+ },+ {+ "number": "22",+ "name": "AVDD",+ "type": "power_in",+ "description": "Analog supply voltage; recommended range 2.0V to 3.6V"+ },+ {+ "number": "23",+ "name": "AGND",+ "type": "power_in",+ "description": "Analog ground reference"+ },+ {+ "number": "24",+ "name": "ADCVREF",+ "type": "output",+ "description": "ADC reference voltage output; requires 1µF decoupling capacitor to ground"+ },+ {+ "number": "25",+ "name": "VMID",+ "type": "output",+ "description": "Mid-supply reference output (AVDD/2); requires 1µF decoupling capacitor for stability"+ },+ {+ "number": "26",+ "name": "MICBIAS",+ "type": "output",+ "description": "Microphone bias output for electret microphone elements"+ },+ {+ "number": "27",+ "name": "RIN2",+ "type": "input",+ "description": "Right input channel 2; 20 kΩ input impedance"+ },+ {+ "number": "28",+ "name": "LIN2",+ "type": "input",+ "description": "Left input channel 2; 20 kΩ input impedance"+ },+ {+ "number": "29",+ "name": "RIN1",+ "type": "input",+ "description": "Right input channel 1; 20 kΩ input impedance"+ },+ {+ "number": "30",+ "name": "LIN1",+ "type": "input",+ "description": "Left input channel 1; 20 kΩ input impedance"+ },+ {+ "number": "31",+ "name": "CE",+ "type": "input",+ "description": "I²C chip address select; pull low for address 0x10, high for address 0x11"+ },+ {+ "number": "32",+ "name": "CDATA",+ "type": "bidirectional",+ "description": "I²C data line; open-drain bidirectional interface, 400 kbps maximum"+ },+ {+ "number": "33",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Exposed pad (EP) of QFN-32-EP package not formally documented in pin table. QFN-EP packages typicall",+ "exposed pad 33 added from the footprint"+ ],+ "pages_sent": 12,+ "cost_usd": 0.2522,+ "at": "2026-09-17T21:27:58"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588883895215394816",+ "pages": 12,+ "sha256": "87fd94615aea6f5c",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 33,+ "described": 33,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}