← Commit history

Initial commit: component/es7241d

Ray ·ff9cbab949 ·
2 files changed +90
README.mdadded+56
@@ -0,0 +1,56 @@+# ES7241D++**Everest semi Everest Semiconductor** · Audio Interface ICs · QFN-16-EP(3x3)++ES7241D from Everest semi Everest Semiconductor, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VDDP | power_in | Power supply for the digital input and output. Recommended 1.6 V to 3.6 V (typ 3.3 V). Decoupling capacitors (100 nF) should be placed close to the pin. |+| 2 | SDOUT | output | Serial data output from the ADC. Audio data output on the falling edge of SCLK. Format selection: pull-up resistor at SDOUT selects I2S; pull-down resistor selects left-justified format. |+| 3 | GNDD | power_in | Digital ground reference. Connect to system ground plane; in layout the chip should be treated as an analog device with AGND connected to system GND via 0Ω. |+| 4 | VDDD | power_in | Digital power supply. Recommended 3.0 V to 3.6 V (typ 3.3 V). Requires 100 nF decoupling capacitor close to the pin. |+| 5 | SCLK | bidirectional | Serial data bit clock. Direction depends on M1:M0 mode selection - output in master mode (derived internally from MCLK) or input in slave mode. SCLK/LRCK ratio is normally 64; maximum frequency 26 MHz. |+| 6 | LRCK | bidirectional | Serial data left/right channel frame clock (word clock). Output in master mode, input in slave mode. Maximum frequency 200 kHz; duty cycle 40-60%. |+| 7 | RESETb | input | Active-low chip reset. Drive low to place device in low-power reset/power-down. Must be held low during power-up until supplies, clocks and mode-select pins are stable. |+| 8 | AINL | input | Analog left channel input to the delta-sigma modulator. Full-scale input level 1.084 Vrms (3 Vpp); input impedance 20 kΩ. AC-couple with 1 µF capacitor. |+| 9 | REFQ | passive | Reference filtering capacitor connection. Connect a 1 µF filtering capacitor to AGND close to the pin for best performance. |+| 10 | AINR | input | Analog right channel input to the delta-sigma modulator. Full-scale input level 1.084 Vrms (3 Vpp); input impedance 20 kΩ. AC-couple with 1 µF capacitor. |+| 11 | VDDA | power_in | Analog power supply for the ADC and reference circuits. Recommended 3.0 V to 3.6 V (typ 3.3 V). Requires 1 µF (and optionally 100 nF parallel) decoupling to AGND close to the pin. |+| 12 | GNDA | power_in | Analog ground reference for the ADC. Connect to system ground plane via a 0 Ω link; chip is treated as an analog device in layout. |+| 13 | REFP | passive | Reference filtering capacitor connection. Connect a 1 µF filtering capacitor (optionally paralleled with 100 nF) to AGND close to the pin. |+| 14 | M1 | input | Mode selection bit 1. With M0 forms a 2-bit code: 00=master single speed, 01=master double speed, 10=master quad speed, 11=slave mode (all speeds). Sample the pin state at reset. |+| 15 | M0 | input | Mode selection bit 0. Together with M1 selects master/slave clock mode and single/double/quad speed operation (see Table 1). |+| 16 | MCLK | input | Master clock input to the clock manager / sample-rate detector. Maximum 51.2 MHz, duty cycle 40-60%. In master mode LRCK and SCLK are derived internally from MCLK. |+| 17 | PGND | power_in | Exposed thermal/ground pad on QFN bottom (center paddle). Connect to AGND for proper thermal dissipation and grounding. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Everest semi Everest Semiconductor |+| Package | QFN-16-EP(3x3) |+| Category | Interface |+| Pins | 17 |++## Ordering variants++- `ES7241D`++## CAD (KiCad official)++- Symbol: `ES7241D`+- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`+- 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Everest semi Everest Semiconductor datasheet](docs/es7241d-datasheet.pdf) (10 pp, sha256 `9ea48093a9982ecc`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/es7241d-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "es7241d",+  "version": "0.1.0",+  "type": "component",+  "description": "Everest semi Everest Semiconductor Audio Interface ICs, QFN-16-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "es7241d"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "es7241d.kicad_sym",+    "es7241d.kicad_mod",+    "es7241d.glb",+    "es7241d.step",+    "es7241d.lbr",+    "docs/hero.png",+    "docs/es7241d-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file