← Commit history
page.json+170−8@@ -1,13 +1,180 @@ {+ "schema_version": 1,+ "type": "component", "slug": "es7241d",+ "title": "ES7241D",+ "brief": "Everest semi Everest Semiconductor Audio Interface ICs, QFN-16-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Everest semi Everest Semiconductor Audio Interface ICs, QFN-16-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "interface", "es7241d" ],+ "component": {+ "mpn": "ES7241D",+ "manufacturer": "Everest semi Everest Semiconductor",+ "package": "QFN-16-EP(3x3)",+ "pin_count": 17,+ "category": "Interface",+ "subcategory": "Audio Interface ICs",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/3ec3876c08929b8fc67e7ff1abd4058c.pdf",+ "parts": {+ "symbol": "es7241d.kicad_sym",+ "footprint": "es7241d.kicad_mod",+ "model_3d": "es7241d.glb",+ "model_3d_step": "es7241d.step",+ "lbr": "es7241d.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "VDDP",+ "type": "power_in",+ "description": "Power supply for the digital input and output. Recommended 1.6 V to 3.6 V (typ 3.3 V). Decoupling capacitors (100 nF) should be placed close to the pin."+ },+ {+ "number": "2",+ "name": "SDOUT",+ "type": "output",+ "description": "Serial data output from the ADC. Audio data output on the falling edge of SCLK. Format selection: pull-up resistor at SDOUT selects I2S; pull-down resistor selects left-justified format."+ },+ {+ "number": "3",+ "name": "GNDD",+ "type": "power_in",+ "description": "Digital ground reference. Connect to system ground plane; in layout the chip should be treated as an analog device with AGND connected to system GND via 0\u03a9."+ },+ {+ "number": "4",+ "name": "VDDD",+ "type": "power_in",+ "description": "Digital power supply. Recommended 3.0 V to 3.6 V (typ 3.3 V). Requires 100 nF decoupling capacitor close to the pin."+ },+ {+ "number": "5",+ "name": "SCLK",+ "type": "bidirectional",+ "description": "Serial data bit clock. Direction depends on M1:M0 mode selection - output in master mode (derived internally from MCLK) or input in slave mode. SCLK/LRCK ratio is normally 64; maximum frequency 26 MHz."+ },+ {+ "number": "6",+ "name": "LRCK",+ "type": "bidirectional",+ "description": "Serial data left/right channel frame clock (word clock). Output in master mode, input in slave mode. Maximum frequency 200 kHz; duty cycle 40-60%."+ },+ {+ "number": "7",+ "name": "RESETb",+ "type": "input",+ "description": "Active-low chip reset. Drive low to place device in low-power reset/power-down. Must be held low during power-up until supplies, clocks and mode-select pins are stable."+ },+ {+ "number": "8",+ "name": "AINL",+ "type": "input",+ "description": "Analog left channel input to the delta-sigma modulator. Full-scale input level 1.084 Vrms (3 Vpp); input impedance 20 k\u03a9. AC-couple with 1 \u00b5F capacitor."+ },+ {+ "number": "9",+ "name": "REFQ",+ "type": "passive",+ "description": "Reference filtering capacitor connection. Connect a 1 \u00b5F filtering capacitor to AGND close to the pin for best performance."+ },+ {+ "number": "10",+ "name": "AINR",+ "type": "input",+ "description": "Analog right channel input to the delta-sigma modulator. Full-scale input level 1.084 Vrms (3 Vpp); input impedance 20 k\u03a9. AC-couple with 1 \u00b5F capacitor."+ },+ {+ "number": "11",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog power supply for the ADC and reference circuits. Recommended 3.0 V to 3.6 V (typ 3.3 V). Requires 1 \u00b5F (and optionally 100 nF parallel) decoupling to AGND close to the pin."+ },+ {+ "number": "12",+ "name": "GNDA",+ "type": "power_in",+ "description": "Analog ground reference for the ADC. Connect to system ground plane via a 0 \u03a9 link; chip is treated as an analog device in layout."+ },+ {+ "number": "13",+ "name": "REFP",+ "type": "passive",+ "description": "Reference filtering capacitor connection. Connect a 1 \u00b5F filtering capacitor (optionally paralleled with 100 nF) to AGND close to the pin."+ },+ {+ "number": "14",+ "name": "M1",+ "type": "input",+ "description": "Mode selection bit 1. With M0 forms a 2-bit code: 00=master single speed, 01=master double speed, 10=master quad speed, 11=slave mode (all speeds). Sample the pin state at reset."+ },+ {+ "number": "15",+ "name": "M0",+ "type": "input",+ "description": "Mode selection bit 0. Together with M1 selects master/slave clock mode and single/double/quad speed operation (see Table 1)."+ },+ {+ "number": "16",+ "name": "MCLK",+ "type": "input",+ "description": "Master clock input to the clock manager / sample-rate detector. Maximum 51.2 MHz, duty cycle 40-60%. In master mode LRCK and SCLK are derived internally from MCLK."+ },+ {+ "number": "17",+ "name": "PGND",+ "type": "power_in",+ "description": "Exposed thermal/ground pad on QFN bottom (center paddle). Connect to AGND for proper thermal dissipation and grounding."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/3ec3876c08929b8fc67e7ff1abd4058c.pdf",+ "pages": 10,+ "sha256": "9ea48093a9982ecc",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 17,+ "described": 17,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Everest semi Everest Semiconductor",+ "Package": "QFN-16-EP(3x3)",+ "Category": "Interface",+ "Pins": "17"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "es7241d"+ ],+ "discovery_pitch": "ES7241D (Everest semi Everest Semiconductor) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +192,5 @@ "docs/es7241d-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }