component

ERJ2RKF8873X

Public Made by Adom

by adom

Panasonic Chip Resistor - Surface Mount, 0402. KiCad symbol, footprint and 3D as used on Adom boards.

Verified ERJ2RKF8873X

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match

SymbolFootprint3D modelPins

Verification log 2 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against Panasonic's ERJ type datasheet (AOA0000C304, pages dated 29-May-25)files match

SymbolFootprint3D modelPinsfor all variants

✓Datasheet: replaced the LCSC/JLCPCB copy (7 pages) with Panasonic's current 'ERJ type' datasheet (Precision Thick Film Chip Resistors, AOA0000C304; product pages 1-4 dated 29-May-25, precaution pages 5-8 dated 10-May-24 and 30-Jun-23), downloaded 2026-10-27 from the Datasheet link on industrial.panasonic.com/ww/products/pt/general-purpose-chip-resistors/models/ERJ2RKF8873X (https://industrial.panasonic.com/cdbs/www-data/pdf/RDA0000/AOA0000C304.pdf); DigiKey links the same file
✓Part number decoded with 'Explanation of part numbers' for the ±1% series (p.2): ERJ = thick film chip resistor; 2RK = 0402, 0.1 W; F = ±1%; 8873 = 887 x 10^3 Ω = 887 kΩ; X = punched carrier taping, 2 mm pitch, 10,000 pcs. The Panasonic model page lists ERJ2RKF8873X as 0.100 W, 1.0 x 0.5 mm (EIA 0402), 887000 Ω, ±1%, punched (paper) taping 2 mm pitch, T.C.R. ±100
✓Ratings for ERJ2RK, ±1% (p.3): 0.1 W at 70 °C, limiting element voltage 50 V, maximum overload voltage 100 V, resistance range 10 Ω to 1 MΩ (E24, E96) covers 887 kΩ, T.C.R. ±100 x 10^-6/K, category temperature -55 to +155 °C, AEC-Q200 Grade 0
✓Pins: unpolarized two-terminal part; pins 1 and 2 keep empty names, type passive and the library descriptions (the datasheet has no pin table; both electrodes are identical, Construction p.3)
✓Footprint vs Dimensions (p.4) for ERJ2R (L 1.00±0.05, W 0.50±0.05, bottom electrode b 0.25±0.05, top a 0.20±0.10 mm): pads 0.54 x 0.64 mm at x = ±0.51 mm (inner edges ±0.24, outer ±0.78 mm) cover both electrodes; pad width 0.64 mm exceeds the maximum body width 0.55 mm; pins 1/2 on the long axis
•Footprint vs Panasonic's 'Surface Mount Resistors Land Pattern' (DMM0000COL17, dated 24-Dec-25, linked from the same model page; general purpose ERJ, 1005 (0402): gap a 0.5 to 0.6, overall b 1.4 to 1.6, width c 0.4 to 0.6 mm): the KiCad pads give gap 0.48, overall 1.56, width 0.64 mm, so 0.02 mm narrower gap and 0.04 mm wider pads than the recommendation; they still cover the electrodes and are kept as built on Adom boards
✓3D body 1.00 x 0.50 x 0.35 mm against ERJ2R L 1.00±0.05, W 0.50±0.05, T 0.35±0.05 mm (p.4): nominal; Z-up, seated on z = 0, centred on the pads
✓Distributors: DigiKey was false (the 2026-10-08 search missed the hyphenated listing); DigiKey lists it as ERJ-2RKF8873X, Panasonic Industry, P887KLTR-ND (tape and reel, RES SMD 887K OHM 1% 1/10W 0402), confirmed by part lookup on 2026-10-27. Mouser 667-ERJ-2RKF8873X kept (lookup returns Panasonic Industry ERJ-2RKF8873X, 0402 887 kΩ 1% AEC-Q200)
✓Symbol and footprint Datasheet properties point at the manufacturer datasheet URL
✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
✓component-page-verify: all checks pass

Evidencedatasheet (Panasonic)

Verified files✓ erj2rkf8873x.kicad_sym✓ erj2rkf8873x.kicad_mod✓ erj2rkf8873x.step

8 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded

SymbolFootprint3D modelPinsfor all variants

✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
✓adom-lbr generate + lint passed
✓2 of 2 pins described
•Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing

Evidencedatasheet

Verified files! erj2rkf8873x.kicad_sym! erj2rkf8873x.kicad_mod✓ erj2rkf8873x.step

Spot something wrong? Report it as an issue · Propose a fix Records are signed by members of adom.

Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

← Commit history

Remove viewer slots until viewers are generated

Caleb ·158916a29c ·21d ago ·parent cace049

1 file changed +1−7

page.json+1−7

@@ -76,10 +76,6 @@         "refuses_to_fabricate": true       }     },-    "viewers": {-      "symbol": "viewers/symbol.html",-      "footprint": "viewers/footprint.html"-    },     "models_3d": [       {         "file": "erj2rkf8873x.step",@@ -162,9 +158,7 @@     "erj2rkf8873x.step",     "erj2rkf8873x.lbr",     "docs/hero.png",-    "docs/erj2rkf8873x-datasheet.pdf",-    "viewers/symbol.html",-    "viewers/footprint.html"+    "docs/erj2rkf8873x-datasheet.pdf"   ],   "visibility": {     "public": false