component

EP2RKU+

Public Made by Adom

Mini-Circuits Power Splitter/Combiner, 2-way 0 deg (DG1677-2 case), DG1677-2. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.

Verified EP2RKU+

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record, 5 retired · files match

SymbolFootprint3D modelPins

Verification log 6 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against Mini-Circuits EP2RKU+ datasheet (REV. B, ECO-012024, 2025-09-04), case style DG1677-2 and layout 98-PL-648 rev ORfiles match

SymbolFootprint3D modelPinsfor all variants

✓Datasheet: the page already carries Mini-Circuits' current edition (REV. B, ECO-012024, dated 250904); sha256 915836da matches minicircuits.com/pdfs/EP2RKU+.pdf fetched 2026-10-27
✓All 33 pads match the PAD CONNECTIONS table (p.2) by number and name: RF IN 21, RF OUT 1 12, RF OUT 2 29, GROUND 11/13/20/22/28/30 and the paddle (33), NOT USED (ground externally) 1-10, 14-19, 23-27, 31-32. Names already matched; descriptions re-cited from p.1 to p.2 (the table is on PDF page 2) and RF pins 12, 21, 29 described
✓Pin types: GROUND pads and paddle power_in; RF IN / RF OUT 1 / RF OUT 2 passive (passive GaAs splitter/combiner, ports work in both directions); NOT USED pads passive, not no_connect, because the datasheet says to ground them externally (was input on every pin)
✓Pad 1 corner: footprint numbers counter-clockwise from pin 1 at the top of the left column (1-8 left, 9-16 bottom, 17-24 right, 25-32 top), as the DG1677-2 outline (pin 1 index, pin 32 adjacent). 98-PL-648 draws the same package rotated 90° (PIN 1 at the right end of the top row, RF IN bottom, RF OUT 1 left, RF OUT 2 right), which is exactly where pads 21, 12 and 29 land after that rotation
•Footprint vs DG1677-2 suggested land pattern: 32 pads 0.30 x 0.89 mm (P 0.30, Q 0.89) at 0.50 mm pitch (K), pad rows at +-2.45 mm = 4.90 mm centre to centre (L = M = 4.90), thermal pad 2.79 x 2.79 mm (N = R = 2.79); pads 7, 10, 18, 31 sit 0.008 mm off the row line (negligible); the land pattern's S = 0.20 x 45° corner chamfer on the thermal pad is not drawn
✓3D body 5.00 x 5.00 x 0.90 mm against A = B = 5.00, C 0.80 to 1.00 mm (DG1677-2); Z-up, seated on z = 0, centred on the pads
✓DigiKey 3157-EP2RKU+TR-ND and Mouser 139-EP2RKU+ confirmed by part lookup 2026-10-27 (Mini-Circuits EP2RKU+)
✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
✓component-page-verify 0.2.0: all checks pass

Evidencedatasheet (Mini-Circuits)case style DG1677-2 suggested PCB layout 98-PL-648

Verified files✓ ep2rku.kicad_sym✓ ep2rku.kicad_mod✓ ep2rku.step

9 Oct 2026Claude (AI build)Datasheet pins not matched to a symbol pin: GND, GND(PAD), NC, RF-IN, RF-OUT1, RF-OUT2superseded

reviewfor all variants

•Datasheet pins not matched to a symbol pin: GND, GND(PAD), NC, RF-IN, RF-OUT1, RF-OUT2

9 Oct 2026Claude (AI build)Pin names differ between the board symbol and the datasheet (often equivalent naming; chec...superseded

reviewfor all variants

•Pin names differ between the board symbol and the datasheet (often equivalent naming; check): 1: symbol "NOT USED" vs datasheet "NC"; 2: symbol "NOT USED" vs datasheet "NC"; 3: symbol "NOT USED" vs datasheet "NC"; 4: symbol "NOT USED" vs datasheet "NC"; 5: symbol "NOT USED" vs datasheet "NC"; 6: symbol "NOT USED" vs datasheet "NC"; 7: symbol "NOT USED" vs datasheet "NC"; 8: symbol "NOT USED" vs datasheet "NC"; 9: symbol "NOT USED" vs datasheet "NC"; 10: symbol "NOT USED" vs datasheet "NC"; 11: symbol "GROUND" vs datasheet "GND"; 12: symbol "RF OUT 1" vs datasheet "RF-OUT1" ...

9 Oct 2026Claude (AI build)3 of 33 pins have no datasheet description yet (pins 12, 21, 29).superseded

reviewfor all variants

•3 of 33 pins have no datasheet description yet (pins 12, 21, 29).

9 Oct 2026Claude (AI build)The schematic value is DG1677-2, which is the Mini-Circuits case style; the part placed on...superseded

reviewfor all variants

•The schematic value is DG1677-2, which is the Mini-Circuits case style; the part placed on the board is EP2RKU+ (symbol lib Combiners:EP2RKU+).

9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded

SymbolFootprint3D modelPinsfor all variants

✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
✓adom-lbr generate + lint passed
•30 of 33 pins described from the datasheet (adom-ds2sf, page-cited)
•Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing

Evidencedatasheet

Verified files! ep2rku.kicad_sym! ep2rku.kicad_mod✓ ep2rku.step

Spot something wrong? Report it as an issue · Propose a fix Records are signed by members of adom.

Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

History of `ep2rku-hero.glb`

1 commit ← Back to file

Publish 0.1.1

Caleb · cea3393 · 2d ago

EP2RKU+

History of ep2rku-hero.glb

History of `ep2rku-hero.glb`