component
EG4003C
Public Made by Adomby adom
EG Micro Ambient Light Sensors, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+116−8@@ -1,13 +1,126 @@ {+ "schema_version": 1,+ "type": "component", "slug": "eg4003c",+ "title": "EG4003C",+ "brief": "EG Micro Ambient Light Sensors, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "EG Micro Ambient Light Sensors, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "sensor", "eg4003c" ],+ "component": {+ "mpn": "EG4003C",+ "manufacturer": "EG Micro",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "Sensor",+ "subcategory": "Ambient Light Sensors",+ "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2201121400_EG-Micro-EG4003C_C2929101.pdf",+ "parts": {+ "symbol": "eg4003c.kicad_sym",+ "footprint": "eg4003c.kicad_mod",+ "model_3d": "eg4003c.glb",+ "model_3d_step": "eg4003c.step",+ "lbr": "eg4003c.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "1OUT",+ "type": "output",+ "description": "Output of the internal first-stage op-amp (OP1). Used as the feedback node for the external gain-setting network (R2, R3, C3) driving the inverting input 1IN-."+ },+ {+ "number": "2",+ "name": "1IN-",+ "type": "input",+ "description": "Inverting input of the internal first-stage op-amp (OP1). The PIR/microwave signal is AC-coupled here through C2/R2; overall analog gain A = A1*A2 = (R3/R2)*30 (typical 9000)."+ },+ {+ "number": "3",+ "name": "VC",+ "type": "input",+ "description": "Trigger-inhibit input. When V(VC) < 0.2*VDD triggering is disabled and OUT is forced low; when V(VC) > 0.2*VDD the trigger path is enabled and OUT follows Vs. Typically driven by a CdS/LDR divider for dusk-only operation."+ },+ {+ "number": "4",+ "name": "A",+ "type": "input",+ "description": "Retrigger mode select. A='1' (tied to VDD) enables retriggerable mode (Tx timer restarts on each Vs pulse during Tx). A='0' (tied to GND) selects non-retriggerable mode. VAH=3.5 V min @VDD=5 V; VAL=1 V max @VDD=5 V."+ },+ {+ "number": "5",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground reference (0 V)."+ },+ {+ "number": "6",+ "name": "OUT",+ "type": "output",+ "description": "Active-high control signal output driving the load (relay, transistor, MCU). Drive capability \u00b125 mA at VDD=5 V and \u00b110 mA at VDD=3 V; VOH=4.5 V min @ILOAD=10 mA / VDD=5 V."+ },+ {+ "number": "7",+ "name": "CT",+ "type": "passive",+ "description": "Oscillator timing node. Connect an external capacitor CT to GND and a pull-up resistor RT (>=100 k\u03a9) to VDD; Tosc \u2248 0.4\u00b7RT\u00b7CT\u00b7RT/(RT-20k). Example: RT=100 k\u03a9, CT=1 nF \u2192 Tosc\u224850 \u03bcs (f\u224820 kHz). Sets Tx and Ti timer periods."+ },+ {+ "number": "8",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive supply input, +3 V to +6 V operating range (7 V absolute max). Quiescent current typ 35 uA @3 V, 65 uA @5 V."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2201121400_EG-Micro-EG4003C_C2929101.pdf",+ "pages": 14,+ "sha256": "b037c27db8b148b3",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "EG Micro",+ "Package": "SOP-8",+ "Category": "Sensor",+ "Pins": "8"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "eg4003c"+ ],+ "discovery_pitch": "EG4003C (EG Micro) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +138,5 @@ "docs/eg4003c-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }