component
eg3002
Public Made by Adomby adom
EG Micro Isolators - Gate Drivers, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+44@@ -0,0 +1,44 @@+# EG3002++**EG Micro** · Isolators - Gate Drivers · SOP-8++EG3002 from EG Micro, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VCP- | input | Inverting input of the internal fast comparator. Used with VCP+ to sense a current-shunt voltage for short-circuit / overcurrent protection; when VCP- > VCP+ the driver output follows IN, when VCP- < VCP+ the output is forced low. Input range -0.3V to VCC+0.3V. |+| 2 | VCP+ | input | Non-inverting input of the internal fast comparator. Typically tied to a reference (~0.1V) for shunt-based overcurrent sensing. Input range -0.3V to VCC+0.3V; input offset voltage ~1mV typ (10mV max), bias current ~0.3µA typ. |+| 3 | IN | input | Logic drive input controlling turn-on/turn-off of the external power MOSFET. High (VIH ≥ 2.5V, typ 5V, up to 30V) turns the MOSFET on; low (VIL ≤ 1.0V) turns it off. Input current ~200µA typ at Vin=5V (logic 1), ~0µA at logic 0. Absolute range -0.3V to VCC+0.3V (pin tolerates up to +30V per features list). |+| 4 | SD | input | Shutdown / output-disable control. Logic '0' enables the driver output; logic '1' forces the output low and disables the driver. Implements cycle-by-cycle shutdown for short-circuit / overcurrent protection: after a shutdown, the output stays off until IN transitions low-to-high again. VIH ≥ 2.5V, VIL ≤ 1.0V; input current ~210µA typ at 5V. |+| 5 | GND | power_in | Common ground for input and output stages. Must be routed close to the source terminal of the driven MOSFET to minimize gate-loop inductance. |+| 6 | OUTS | output | Sink (pull-down) driver output for the external MOSFET gate. Sinks up to 1.2A peak (PW ≤ 10µs). Typically tied to OUTD through a turn-off resistor to independently set the MOSFET gate fall time. Absolute range -0.3V to 35V. |+| 7 | OUTD | output | Source (pull-up) driver output for the external MOSFET gate. Sources up to 1A peak (PW ≤ 10µs). Typically tied to OUTS through a turn-on resistor to independently set the MOSFET gate rise time. Absolute range -0.3V to 35V. |+| 8 | Vcc | power_in | Chip supply and MOSFET gate-drive supply. Operating range 3V-30V (recommended 8V-20V for driving N-channel power MOSFETs); absolute max 35V. Quiescent current ~2mA typ (3.5mA max) at 12V with input floating. Bypass with a local ceramic (and bulk) capacitor to GND. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | EG Micro |+| Package | SOP-8 |+| Category | PMIC |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `EG3002`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [EG Micro datasheet](docs/eg3002-datasheet.pdf) (None pp, sha256 `713fe883f81686f0`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/eg3002-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "eg3002",+ "version": "0.1.0",+ "type": "component",+ "description": "EG Micro Isolators - Gate Drivers, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "eg3002"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "eg3002.kicad_sym",+ "eg3002.kicad_mod",+ "eg3002.glb",+ "eg3002.step",+ "eg3002.lbr",+ "docs/hero.png",+ "docs/eg3002-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}