← Commit history

eg3002: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·493f611523 · ·parent 93c4ab3
1 file changed +74−1
page.json+74−1
@@ -33,5 +33,78 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "EG3002",+    "manufacturer": "EG Micro",+    "package": "SOP-8",+    "pin_count": 8,+    "category": "Isolators - Gate Drivers",+    "parts": {+      "symbol": "eg3002.kicad_sym",+      "footprint": "eg3002.kicad_mod",+      "model_3d": "eg3002-etched.glb",+      "model_3d_plain": "eg3002.glb",+      "model_3d_step": "eg3002-etched.step",+      "model_3d_step_plain": "eg3002.step",+      "lbr": "eg3002.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "VCP-",+        "type": "input",+        "description": "Inverting input of the internal fast comparator. Used with VCP+ to sense a current-shunt voltage for short-circuit / overcurrent protection; when VCP- > VCP+ the driver output follows IN, when VCP- < VCP+ the output is forced low. Input range -0.3V to VCC+0.3V."+      },+      {+        "number": "2",+        "name": "VCP+",+        "type": "input",+        "description": "Non-inverting input of the internal fast comparator. Typically tied to a reference (~0.1V) for shunt-based overcurrent sensing. Input range -0.3V to VCC+0.3V; input offset voltage ~1mV typ (10mV max), bias current ~0.3µA typ."+      },+      {+        "number": "3",+        "name": "IN",+        "type": "input",+        "description": "Logic drive input controlling turn-on/turn-off of the external power MOSFET. High (VIH ≥ 2.5V, typ 5V, up to 30V) turns the MOSFET on; low (VIL ≤ 1.0V) turns it off. Input current ~200µA typ at Vin=5V (logic 1), ~0µA at logic 0. Absolute range -0.3V to VCC+0.3V (pin tolerates up to +30V per features list)."+      },+      {+        "number": "4",+        "name": "SD",+        "type": "input",+        "description": "Shutdown / output-disable control. Logic '0' enables the driver output; logic '1' forces the output low and disables the driver. Implements cycle-by-cycle shutdown for short-circuit / overcurrent protection: after a shutdown, the output stays off until IN transitions low-to-high again. VIH ≥ 2.5V, VIL ≤ 1.0V; input current ~210µA typ at 5V."+      },+      {+        "number": "5",+        "name": "GND",+        "type": "power_in",+        "description": "Common ground for input and output stages. Must be routed close to the source terminal of the driven MOSFET to minimize gate-loop inductance."+      },+      {+        "number": "6",+        "name": "OUTS",+        "type": "output",+        "description": "Sink (pull-down) driver output for the external MOSFET gate. Sinks up to 1.2A peak (PW ≤ 10µs). Typically tied to OUTD through a turn-off resistor to independently set the MOSFET gate fall time. Absolute range -0.3V to 35V."+      },+      {+        "number": "7",+        "name": "OUTD",+        "type": "output",+        "description": "Source (pull-up) driver output for the external MOSFET gate. Sources up to 1A peak (PW ≤ 10µs). Typically tied to OUTS through a turn-on resistor to independently set the MOSFET gate rise time. Absolute range -0.3V to 35V."+      },+      {+        "number": "8",+        "name": "Vcc",+        "type": "power_in",+        "description": "Chip supply and MOSFET gate-drive supply. Operating range 3V-30V (recommended 8V-20V for driving N-channel power MOSFETs); absolute max 35V. Quiescent current ~2mA typ (3.5mA max) at 12V with input floating. Bypass with a local ceramic (and bulk) capacitor to GND."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}