component
eg21364
Public Made by Adomby adom
EG Micro Isolators - Gate Drivers, SOP-28. Datasheet-verified pinout, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+64@@ -0,0 +1,64 @@+# EG21364++**EG Micro** · Isolators - Gate Drivers · SOP-28++EG21364 from EG Micro, in a SOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VCC | power_in | Low-side supply voltage. Recommended operating range 10 V to 25 V (absolute max 25 V); typically 15 V. Referenced to VSS/COM. |+| 2 | HIN1 | input | High-side input for channel 1. Logic input in-phase with HO1. VIH ≥ 3.0 V, VIL ≤ 0.8 V, compatible with 3.3 V/5 V logic. |+| 3 | HIN2 | input | High-side input for channel 2. Logic input in-phase with HO2. VIH ≥ 3.0 V, VIL ≤ 0.8 V. |+| 4 | HIN3 | input | High-side input for channel 3. Logic input in-phase with HO3. VIH ≥ 3.0 V, VIL ≤ 0.8 V. |+| 5 | LIN1 | input | Low-side input for channel 1. Logic input in-phase with LO1. VIH ≥ 3.0 V, VIL ≤ 0.8 V. |+| 6 | LIN2 | input | Low-side input for channel 2. Logic input in-phase with LO2. VIH ≥ 3.0 V, VIL ≤ 0.8 V. |+| 7 | LIN3 | input | Low-side input for channel 3. Logic input in-phase with LO3. VIH ≥ 3.0 V, VIL ≤ 0.8 V. |+| 8 | FAULT | output | Active-low fault indicator (open-drain, RONFAULT 50-100 Ω). Asserts low on over-current (ITRIP) or low-side under-voltage lockout; released to high-Z after the RCIN fault-clear timer expires. |+| 9 | ITRIP | input | Over-current protection sense input. Threshold VITTH ≈ 0.50 V (hysteresis ≈ 0.09 V). Exceeding threshold shuts off all six outputs and asserts FAULT. |+| 10 | EN | input | Enable input. VTH+ ≤ 3.0 V asserts enable, VTH- ≥ 0.8 V disables. When low, all six outputs are forced low. |+| 11 | RCIN | input | External RC network sets the fault-clear delay (tFLTCLR ≈ 1.65 ms typ). Rising threshold VRCINTH ≈ 8 V, hysteresis ≈ 3 V, internal pull-down RONRCIN 50-100 Ω. |+| 12 | VSS | power_in | Logic/signal ground reference for the IC. |+| 13 | COM | power_in | Low-side gate driver common (power ground) return. All voltage limits are referenced to COM. |+| 14 | LO3 | output | Low-side gate drive output for channel 3. Referenced to COM; VOH ≈ VCC−0.8 V @ 25 mA, VOL ≈ 0.2 V @ 25 mA; source 200 mA / sink 350 mA. |+| 15 | LO2 | output | Low-side gate drive output for channel 2. Referenced to COM; source 200 mA / sink 350 mA typical. |+| 16 | LO1 | output | Low-side gate drive output for channel 1. Referenced to COM; source 200 mA / sink 350 mA typical. |+| 17 | NC | unconnected | No connection. Leave floating. |+| 18 | VS3 | power_in | High-side floating return (source of the external high-side MOSFET) for channel 3. Bootstrap capacitor connects between VB3 and VS3. |+| 19 | HO3 | output | High-side gate drive output for channel 3. Swings between VS3 and VB3; source 200 mA / sink 350 mA typical. |+| 20 | VB3 | power_in | High-side floating bootstrap supply for channel 3. Absolute max 650 V with respect to COM; VBS operating range referenced to VS3. |+| 21 | NC | unconnected | No connection. Leave floating. |+| 22 | VS2 | power_in | High-side floating return (source of the external high-side MOSFET) for channel 2. Bootstrap capacitor connects between VB2 and VS2. |+| 23 | HO2 | output | High-side gate drive output for channel 2. Swings between VS2 and VB2; source 200 mA / sink 350 mA typical. |+| 24 | VB2 | power_in | High-side floating bootstrap supply for channel 2. Absolute max 650 V with respect to COM. |+| 25 | NC | unconnected | No connection. Leave floating. |+| 26 | VS1 | power_in | High-side floating return (source of the external high-side MOSFET) for channel 1. Bootstrap capacitor connects between VB1 and VS1. |+| 27 | HO1 | output | High-side gate drive output for channel 1. Swings between VS1 and VB1; source 200 mA / sink 350 mA typical. |+| 28 | VB1 | power_in | High-side floating bootstrap supply for channel 1. Absolute max 650 V with respect to COM. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | EG Micro |+| Package | SOP-28 |+| Category | PMIC |+| Pins | 28 |++## CAD (KiCad official)++- Symbol: `EG21364`+- Footprint: `Package_SO:SOP-28_8.4x18.16mm_P1.27mm`+- 3D model: SOP-28 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [EG Micro datasheet](docs/eg21364-datasheet.pdf) (None pp, sha256 `7c2ae6cdb382fca9`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/eg21364-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "eg21364",+ "version": "0.1.0",+ "type": "component",+ "description": "EG Micro Isolators - Gate Drivers, SOP-28. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "eg21364"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "eg21364.kicad_sym",+ "eg21364.kicad_mod",+ "eg21364.glb",+ "eg21364.step",+ "eg21364.lbr",+ "docs/hero.png",+ "docs/eg21364-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}