component
EG1151
Public Made by Adomby adom
EG Micro DC-DC Converters, QFN-32-EP(5x5). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+68@@ -0,0 +1,68 @@+# EG1151++**EG Micro** · DC-DC Converters · QFN-32-EP(5x5)++EG1151 from EG Micro, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VDD12 | power_in | Gate-driver module power supply input (nominally 12 V rail feeding the half-bridge drivers). |+| 2 | IFB+ | input | Positive input of the output-current sense op-amp; connect across the current-sense resistor. |+| 3 | IFB- | input | Negative input of the output-current sense op-amp; connect across the current-sense resistor. |+| 4 | NC | unconnected | No connect. Leave floating. |+| 5 | NC | unconnected | No connect. Leave floating. |+| 6 | SWCLK | input | Firmware upgrade clock (SWD-style programming interface). |+| 7 | SWDIO | input | Firmware upgrade data (SWD-style programming interface). |+| 8 | VINFB | input | Input-voltage sense/feedback. Connect via divider to VIN for input-voltage monitoring and UVLO. |+| 9 | RSTN | input | Chip reset input, active low. |+| 10 | AVSS | power_in | Analog/chip ground. |+| 11 | AVDD | power_in | Analog/chip power supply input. |+| 12 | LDO15 | power_out | Internal 1.5 V LDO output; requires an external 0.1 µF decoupling capacitor to GND. |+| 13 | VOUTFB | input | Output-voltage feedback input; connect via resistor divider from VOUT to set the regulation setpoint. |+| 14 | TFB | input | Temperature-sense feedback input (typically for an external NTC). |+| 15 | NC | unconnected | No connect. Leave floating. |+| 16 | NC | unconnected | No connect. Leave floating. |+| 17 | NC | unconnected | No connect. Leave floating. |+| 18 | NC | unconnected | No connect. Leave floating. |+| 19 | NC | unconnected | No connect. Leave floating. |+| 20 | PGND | power_in | Power ground for the gate-driver module. |+| 21 | Reserved | unconnected | Reserved pin per datasheet. Leave unconnected unless otherwise noted. |+| 22 | LO2 | output | Right-bridge low-side gate driver output (drives low-side MOSFET of the right half-bridge). |+| 23 | LO1 | output | Left-bridge low-side gate driver output (drives low-side MOSFET of the left half-bridge). |+| 24 | Reserved | unconnected | Reserved pin per datasheet. Leave unconnected unless otherwise noted. |+| 25 | Reserved | unconnected | Reserved pin per datasheet. Leave unconnected unless otherwise noted. |+| 26 | Reserved | unconnected | Reserved pin per datasheet. Leave unconnected unless otherwise noted. |+| 27 | VS2 | output | Right-bridge high-side floating source/switch node (bootstrap reference for HO2). |+| 28 | HO2 | output | Right-bridge high-side gate driver output (drives high-side MOSFET of the right half-bridge). |+| 29 | VB2 | power_in | Right-bridge high-side bootstrap supply; connect an external bootstrap capacitor between VB2 and VS2. |+| 30 | VS1 | output | Left-bridge high-side floating source/switch node (bootstrap reference for HO1). |+| 31 | HO1 | output | Left-bridge high-side gate driver output (drives high-side MOSFET of the left half-bridge). |+| 32 | VB1 | power_in | Left-bridge high-side bootstrap supply; connect an external bootstrap capacitor between VB1 and VS1. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | EG Micro |+| Package | QFN-32-EP(5x5) |+| Category | PMIC |+| Pins | 32 |++## CAD (KiCad official)++- Symbol: `EG1151`+- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`+- 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [EG Micro datasheet](docs/eg1151-datasheet.pdf) (12 pp, sha256 `4f75e18e89102be4`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/eg1151-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "eg1151",+ "version": "0.1.0",+ "type": "component",+ "description": "EG Micro DC-DC Converters, QFN-32-EP(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "eg1151"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "eg1151.kicad_sym",+ "eg1151.kicad_mod",+ "eg1151.glb",+ "eg1151.step",+ "eg1151.lbr",+ "docs/hero.png",+ "docs/eg1151-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}