EDA Bridge Standard: one way for an AI to drive every PCB tool

@@ -60,12 +60,12 @@ verb by verb: [docs/coverage.md](docs/coverage.md). <!-- coverage:start (tools/generate.py writes this) --> | Tier | Verbs | Altium | KiCad | Fusion 360 | |---|---|---|---|---|-| **core** | 93 | 93 | 90 | 89 |-| **native** | 47 | 47 | 44 | 40 |+| **core** | 93 | 93 | 90 | 90 |+| **native** | 47 | 47 | 44 | 42 | | **checks** | 37 | 37 | 35 | 37 | | **app** | 62 | 62 | 45 | 53 | | **platform** | 18 | 18 | 0 | 1 |-| standard (all but platform) | 239 | 239 | 214 | 219 |+| standard (all but platform) | 239 | 239 | 214 | 222 | <!-- coverage:end -->  The **checks** tier is where the other bridges are furthest behind, and it is the cheapest to close: those verbs are@@ -158,6 +158,7 @@ Decisions so far (proposals from the KiCad and Fusion bridges, 2026-10-27; issue  ## Status +Version 0.24.1: coverage reads Fusion 360 bridge 1.13.24 (222 of 239: add_symbol_art, list_installed_libraries and install_library partial; uninstall_library, normalize_bodies and sch_sheet_symbol unsupported). Version 0.24.0: engine 0.21.0 adds `lint_library` (#28): the shared library rules (pads, courtyard, origin, pins against pads, part numbers) with a fixed severity each, from the footprints and symbols a bridge already reads. Version 0.23.8: coverage reads KiCad bridge 1.0.88 (214 of 239: variants, and sch_zoom partial). Version 0.23.7: coverage reads Fusion 360 bridge 1.13.23 (219 of 239: diagnostics, instances, progress, foreground; panel and selection unsupported).

@@ -1,17 +1,17 @@ # Coverage: every standard verb on each bridge -Altium bridge 0.2.83 (the reference), KiCad bridge 1.0.88, Fusion 360 bridge 1.13.23. 56 verbs came from other bridges' proposals (tools/proposed/); they are marked *proposed*.+Altium bridge 0.2.83 (the reference), KiCad bridge 1.0.88, Fusion 360 bridge 1.13.24. 56 verbs came from other bridges' proposals (tools/proposed/); they are marked *proposed*. `exact` is the same job under the same or an equivalent name; `partial` does part of it or does it differently (`verbs/coverage.json` names what in `note`); `unsupported` answers `not_supported` for the whole job and is not counted; blank is missing. Generated by `tools/generate.py` from `verbs/coverage.json`; do not edit by hand.  | Tier | Verbs | Altium | KiCad | Fusion 360 | |---|---|---|---|---|-| **core** | 93 | 93 | 90 | 89 |-| **native** | 47 | 47 | 44 | 40 |+| **core** | 93 | 93 | 90 | 90 |+| **native** | 47 | 47 | 44 | 42 | | **checks** | 37 | 37 | 35 | 37 | | **app** | 62 | 62 | 45 | 53 | | **platform** | 18 | 18 | 0 | 1 |-| standard (all but platform) | 239 | 239 | 214 | 219 |+| standard (all but platform) | 239 | 239 | 214 | 222 |  ## core @@ -21,7 +21,7 @@ Read and edit the design. Every bridge provides these: they are how an AI sees a |---|---|---|---|---| | `add_body` | Put a 3D body on a footprint of a PcbLib: a STEP model, or an extruded box when no step is given. It REPLACES the footprint's existing 3D bodies (a... | `altium_add_body` | `kicad_add_body` (partial) | `fusion_attach_3d_package` (partial) | | `add_models` | Attach one or more PCBLIB footprint models, parameters, comment and description to a SchLib component (Altium's several-footprints-per-symbol mechanism). | `altium_add_models` | `kicad_footprint_models` (partial) | `fusion_add_models` |-| `add_symbol_art` | Draw the chip-outline artwork (the chip-thumbnailer polylines adom-symbol baked into the KiCad symbol) into a SchLib component, fitted to its body... | `altium_add_symbol_art` |  |  |+| `add_symbol_art` | Draw the chip-outline artwork (the chip-thumbnailer polylines adom-symbol baked into the KiCad symbol) into a SchLib component, fitted to its body... | `altium_add_symbol_art` |  | `fusion_add_symbol_art` | | `align_parts` *proposed* | Line parts up on a common left, right, top, bottom or centre line, or space them evenly, by courtyard box or by anchor point. One undo step, with... | `altium_align_parts` | `kicad_align_parts` | `fusion_align_parts` | | `apply_silkscreen` | Land a silkscreen plan in one undo step: designators and comments moved, sized and turned (or hidden), free overlay texts and lines added (bottom texts... | `altium_apply_silkscreen` | `kicad_silk_fields_batch / kicad_silk_text_batch / kicad_silk_graphics_batch` | `fusion_apply_silkscreen` | | `board_outline` | Draw the board shape as tracks and arcs on a mechanical layer: the outline a fab house reads from the Gerbers. A board built by script has its shape but... | `altium_board_outline` | `kicad_board_outline` | `fusion_board_outline` |@@ -51,7 +51,7 @@ Read and edit the design. Every bridge provides these: they are how an AI sees a | `list_nets` | Every net on the current board with its pad count. | `altium_list_nets` | `kicad_list_nets` | `fusion_list_nets` | | `move_parts` | Move, rotate and flip placed components (side top or bottom; flip:true turns a part over); each part is read back to 0.001 mm, the exact rotation and its... | `altium_move_parts` | `kicad_move_footprint / kicad_flip_footprint` | `fusion_move_parts` | | `net_connections` | Every pad on the board with its net and owner (Designator.Pad), plus a bounding span and the airline length (minimum spanning tree over its pads, airlineMm)... | `altium_net_connections` | `kicad_trace_net / kicad_find_connections` (partial) | `fusion_net_connections` |-| `normalize_bodies` | Move every 3D body of a PcbLib's footprints (or one footprint) onto its pad cluster. A body added through the canvas lands 50000 mil from the pads in the... | `altium_normalize_bodies` |  |  |+| `normalize_bodies` | Move every 3D body of a PcbLib's footprints (or one footprint) onto its pad cluster. A body added through the canvas lands 50000 mil from the pads in the... | `altium_normalize_bodies` |  | unsupported | | `part_parameters` | The parameter names a project's parts carry (with how many parts carry each), or with name, that parameter's value on every part. | `altium_part_parameters` | `kicad_part_parameters` | `fusion_part_parameters` | | `place_on_pcb` | Place ONE footprint from a PcbLib on a new board and return a proof frame. The single-part predecessor of altium_test_board. | `altium_place_on_pcb` | `kicad_place_footprint / kicad_add_footprint` | `fusion_test_board` (partial) | | `place_on_sch` | Place one symbol, or a ';' list of symbols, from the open SchLib on ONE new sheet (sheet sized FROM the measured parts: 500 mil gaps, 600 mil margins, A4... | `altium_place_on_sch` | `kicad_place_on_sch` | `fusion_make_showcase_project` (partial) |@@ -95,7 +95,7 @@ Read and edit the design. Every bridge provides these: they are how an AI sees a | `sch_place_part` | Place a component from a .SchLib onto an EXISTING sheet at a position, with its library parameters (MPN, Manufacturer, distributor numbers) and its... | `altium_sch_place_part` | `kicad_sch_place_symbol` | `fusion_sch_place_part` (partial) | | `sch_reset_fields` *proposed* | Put parts' designator and value text (or the named fields) back where the library symbol places them, through each part's rotation and mirror. One undo step. | `altium_sch_reset_fields` | `kicad_sch_reset_fields` | `fusion_sch_reset_fields` | | `sch_sheet_pins` *proposed* | A sheet symbol's pins: list, add, edit (rename, kind, move along an edge) or delete. import:true adds a pin for every hierarchical port inside the child... | `altium_sch_sheet_pins` | `kicad_sch_sheet_pins` | `fusion_sch_sheet_pins` (partial) |-| `sch_sheet_symbol` | Make a design hierarchical: a sheet symbol on the parent sheet for a child sheet, its entries joined to the parent's nets, and matching ports on the child.... | `altium_sch_sheet_symbol` | `kicad_sch_sheet_symbol` (partial) |  |+| `sch_sheet_symbol` | Make a design hierarchical: a sheet symbol on the parent sheet for a child sheet, its entries joined to the parent's nets, and matching ports on the child.... | `altium_sch_sheet_symbol` | `kicad_sch_sheet_symbol` (partial) | unsupported | | `sch_split_wire` *proposed* | Split the wire through a point into two wires there, with a junction dot at the cut, so a new branch can end on a wire end. One undo step. | `altium_sch_split_wire` | `kicad_sch_split_wire` | `fusion_sch_split_wire` (partial) | | `sch_swap_part` | Replace a placed part with another library part (a different value, package or symbol) at the same place, designator and rotation, keeping its connections:... | `altium_sch_swap_part` | `kicad_sch_replace_symbol` (partial) | `fusion_sch_swap_part` (partial) | | `sch_text` *proposed* | Add free text to a sheet (a note, a title, a design comment) with size, angle, justification, bold and italic. Text has no electrical meaning. One undo step. | `altium_sch_text` | `kicad_sch_text` | `fusion_sch_text` |@@ -140,9 +140,9 @@ Wraps the EDA tool's own feature (its DRC, ERC, Gerbers, pours, Update PCB). Eve | `export_odb` *proposed* | Export the board as ODB++ (copper, drill, stack-up, netlist and parts in one archive) through the tool's own exporter. | `altium_export_odb` | `kicad_export_odb` | `fusion_export_odb` | | `export_pdf` | Every sheet of a project as one PDF, plus on request the board's composite print, Altium's assembly drawings (top and bottom, designators on the parts) and... | `altium_export_pdf` | `kicad_export_pdf` | `fusion_export_pdf` (partial) | | `export_step` | Headless STEP export of a board. Default lane 'outjob': Altium's own ExportSTEP output run from a throwaway project in %TEMP% that points at the board - no... | `altium_export_step` | `kicad_export_step` | `fusion_export_step` |-| `install_library` | Register a library file in Altium's Installed Libraries (IntegratedLibraryManager.InstallLibrary) so its parts appear in the Components panel. | `altium_install_library` | `kicad_install_library` |  |+| `install_library` | Register a library file in Altium's Installed Libraries (IntegratedLibraryManager.InstallLibrary) so its parts appear in the Components panel. | `altium_install_library` | `kicad_install_library` | `fusion_install_library_bundle` (partial) | | `install_library_bundle` | One-click install of a wiki library bundle (zip of .SchLib/.PcbLib): unpack, register, open the library, prove it with a frame. | `altium_install_library_bundle` | `kicad_install_library_bundle` | `fusion_install_library_bundle` |-| `list_installed_libraries` | Every library in Altium's Installed Libraries list (read-only). | `altium_list_installed_libraries` | `kicad_list_installed_libraries` |  |+| `list_installed_libraries` | Every library in Altium's Installed Libraries list (read-only). | `altium_list_installed_libraries` | `kicad_list_installed_libraries` | `fusion_list_installed_libraries` (partial) | | `net_classes` | Net classes on the current board: list them with their nets, or make one (replacing a class of that name) with an optional width and clearance rule scoped... | `altium_net_classes` | `kicad_net_classes` | `fusion_net_classes` | | `netlist` | The compiled netlist of a project: every net with its pins (Designator.Pin) across every sheet, the hierarchy resolved; or one net; or compare with the nets... | `altium_netlist` | `kicad_netlist` | `fusion_netlist` | | `panelize` | Step and repeat a board into a manufacturing panel: a new .PcbDoc holding Altium's own embedded board array of the board (rows x cols), with rails, the... | `altium_panelize` | `kicad_panelize` (partial) | `fusion_panelize` |@@ -163,7 +163,7 @@ Wraps the EDA tool's own feature (its DRC, ERC, Gerbers, pours, Update PCB). Eve | `silkscreen_prep` | Clean the silkscreen off the copper with Altium's own Tools > Silkscreen Preparation: silk clipped clear of every mask opening (pad) by the board's silk... | `altium_silkscreen_prep` | `kicad_silkscreen_prep` | `fusion_silkscreen_prep` (partial) | | `symbol_mode` | Show one display mode (0 = Normal, 1.. = alternates) of the CURRENT SchLib component in the editor and capture a frame. Drives the editor's own mode toggle,... | `altium_symbol_mode` |  | unsupported | | `teardrops` | Add (or remove) teardrops with Altium's own Tools > Teardrops: on vias and through-hole pads, SMD pads, track width changes and T-junctions, for the whole... | `altium_teardrops` | `kicad_teardrops` (partial) | `fusion_teardrops` (partial) |-| `uninstall_library` | Remove libraries from Altium's Installed Libraries: the inverse of install_library / install_library_bundle. Library files are never touched. | `altium_uninstall_library` | `kicad_uninstall_library` |  |+| `uninstall_library` | Remove libraries from Altium's Installed Libraries: the inverse of install_library / install_library_bundle. Library files are never touched. | `altium_uninstall_library` | `kicad_uninstall_library` | unsupported | | `update_pcb` | Design > Update PCB Document from the schematic (the engineering change order): parts added, removed or renamed, nets and footprints updated on the board.... | `altium_update_pcb` | `kicad_update_pcb` (partial) | `fusion_cross_check` (partial) | | `variants` | Assembly variants of a project (which parts are fitted on which build): list them, make or change one with not-fitted parts (or put parts back), or remove... | `altium_variants` | `kicad_variants` | `fusion_variants` (partial) | 

@@ -1,6 +1,6 @@ {   "slug": "eda-bridge-standard",-  "version": "0.24.0",+  "version": "0.24.1",   "type": "skill",   "title": "EDA Bridge Standard: one way for an AI to drive every PCB tool",   "description": "The standard every Adom EDA bridge follows so one AI can drive Altium, KiCad, Fusion 360 and any future PCB tool the same way: shared verb names in tiers, the board model JSON, reply and refusal conventions, and a coverage table of each bridge against the Altium reference.",

@@ -1,5 +1,5 @@ {- "standard": "0.24.0",+ "standard": "0.24.1",  "reference": {   "bridge": "altium",   "version": "0.2.83"@@ -7,7 +7,7 @@  "proposed": 56,  "compared": {   "kicad": "1.0.88",-  "fusion360": "1.13.23"+  "fusion360": "1.13.24"  },  "tiers": {   "core": "Read and edit the design. Every bridge provides these: they are how an AI sees and changes a board.",