ds8201-33f8

@@ -33,5 +33,84 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "DS8201-33F8",+    "manufacturer": "DSTECH",+    "package": "ESOP-8",+    "pin_count": 9,+    "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "parts": {+      "symbol": "ds8201-33f8.kicad_sym",+      "footprint": "ds8201-33f8.kicad_mod",+      "model_3d": "ds8201-33f8-etched.glb",+      "model_3d_plain": "ds8201-33f8.glb",+      "model_3d_step": "ds8201-33f8-etched.step",+      "model_3d_step_plain": "ds8201-33f8.step",+      "lbr": "ds8201-33f8.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "VOUT",+        "type": "power_out",+        "description": "Regulated 3.3V power output (±1% accuracy, up to 80mA). Requires a 1µF to 22µF output capacitor placed close to VOUT and GND for stability and improved PSRR/transient response."+      },+      {+        "number": "2",+        "name": "SNS",+        "type": "input",+        "description": "Output voltage sense input; tie to VOUT for fixed 3.3V operation, or connect to a resistor divider from VOUT to GND for adjustable output. Abs-max on the -33 option is -0.3V to 6V; typical SNS input current ~0.85µA."+      },+      {+        "number": "3",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; leave floating."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground reference. Should be tied to the exposed pad and to the ground planes with short, wide traces near input/output capacitors for best performance."+      },+      {+        "number": "5",+        "name": "EN",+        "type": "input",+        "description": "Active-high enable input. VIH ≥ 3.0V enables regulation; VIL ≤ 0.6V drives shutdown mode (ISD ≈ 100nA typical, 500nA max). EN input current ~10nA (VEN = 36V)."+      },+      {+        "number": "6",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; leave floating."+      },+      {+        "number": "7",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; leave floating."+      },+      {+        "number": "8",+        "name": "VIN",+        "type": "power_in",+        "description": "High-voltage supply input, 3.0V to 110V recommended (abs-max 125V to GND). Requires a 1µF or larger input capacitor placed close to VIN and GND."+      },+      {+        "number": "9",+        "name": "EP",+        "type": "passive",+        "description": "Exposed thermal pad on the ESOP-8 package. May be left floating or connected to GND; connecting to a copper ground pour is recommended to reduce θJA (55°C/W) and improve power dissipation (PD_max ≈ 1.82W at TA=25°C)."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}