component
DS1302Z
Public Made by Adomby adom
JSMSEMI Real-time Clocks (RTC), SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+7−4@@ -56,19 +56,19 @@ "number": "5", "name": "CE", "type": "input",- "description": "Chip enable input. Must be driven high to initiate any read or write transaction on the 3-wire serial interface; driving CE low terminates the transfer and places I/O in high-impedance. Internally pulled down to GND through a typical 40 k\u03a9 resistor."+ "description": "Chip enable input. Must be driven high to initiate any read or write transaction on the 3-wire serial interface; driving CE low terminates the transfer and places I/O in high-impedance. Internally pulled down to GND through a typical 40 kΩ resistor." }, { "number": "6", "name": "I/O", "type": "bidirectional",- "description": "Bidirectional data pin of the 3-wire serial interface (push-pull output). Carries command/address and data bytes to/from the DS1302. Internally pulled down to GND through a typical 40 k\u03a9 resistor."+ "description": "Bidirectional data pin of the 3-wire serial interface (push-pull output). Carries command/address and data bytes to/from the DS1302. Internally pulled down to GND through a typical 40 kΩ resistor." }, { "number": "7", "name": "SCLK", "type": "input",- "description": "Serial clock input used to synchronize data movement on the 3-wire interface. Internally pulled down to GND through a typical 40 k\u03a9 resistor. Maximum clock rate is 2.0 MHz at VCC = 5.0 V (0.5 MHz at VCC = 2.0 V)."+ "description": "Serial clock input used to synchronize data movement on the 3-wire interface. Internally pulled down to GND through a typical 40 kΩ resistor. Maximum clock rate is 2.0 MHz at VCC = 5.0 V (0.5 MHz at VCC = 2.0 V)." }, { "number": "8",@@ -138,5 +138,8 @@ "docs/ds1302z-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }