component
DRV8860PWR
Public Made by Adomby adom
Texas Instruments Stepper Motor Driver, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+11−8@@ -38,25 +38,25 @@ "number": "1", "name": "VM", "type": "power_in",- "description": "Motor power supply plus pin; supply voltage range 8 to 38 V, bypass to GND with 0.1 \u03bcF ceramic and 10 \u03bcF electrolytic capacitors."+ "description": "Motor power supply plus pin; supply voltage range 8 to 38 V, bypass to GND with 0.1 μF ceramic and 10 μF electrolytic capacitors." }, { "number": "2", "name": "DIN", "type": "input",- "description": "Serial data input from controller with internal pulldown resistance of 100 k\u03a9."+ "description": "Serial data input from controller with internal pulldown resistance of 100 kΩ." }, { "number": "3", "name": "CLK", "type": "input",- "description": "Serial clock input; rising edge clocks data into device for write operations, falling edge clocks data out for read operations; internal pulldown resistance of 100 k\u03a9."+ "description": "Serial clock input; rising edge clocks data into device for write operations, falling edge clocks data out for read operations; internal pulldown resistance of 100 kΩ." }, { "number": "4", "name": "LATCH", "type": "input",- "description": "Serial latch signal for latching data into output register; internal pulldown resistance of 100 k\u03a9."+ "description": "Serial latch signal for latching data into output register; internal pulldown resistance of 100 kΩ." }, { "number": "5",@@ -68,19 +68,19 @@ "number": "6", "name": "DOUT", "type": "output",- "description": "Serial data output to controller; open-drain output with internal pullup resistance of 1.4 k\u03a9 to internal 5.7 V."+ "description": "Serial data output to controller; open-drain output with internal pullup resistance of 1.4 kΩ to internal 5.7 V." }, { "number": "7", "name": "nFAULT", "type": "tri_state",- "description": "Fault output driven logic low when in fault condition (OCP, OTS, UVLO, OL); open-drain output requiring external pullup to V3P3, typical pullup resistor greater than 4.7 k\u03a9."+ "description": "Fault output driven logic low when in fault condition (OCP, OTS, UVLO, OL); open-drain output requiring external pullup to V3P3, typical pullup resistor greater than 4.7 kΩ." }, { "number": "8", "name": "ENABLE", "type": "input",- "description": "Logic high enables output drivers, logic low disables outputs and allows internal logic and control register read/write operations; internal pulldown resistance of 100 k\u03a9."+ "description": "Logic high enables output drivers, logic low disables outputs and allows internal logic and control register read/write operations; internal pulldown resistance of 100 kΩ." }, { "number": "9",@@ -206,5 +206,8 @@ "docs/drv8860pwr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }