component
DRV8848PWPR
Public Made by Adomby adom
Texas Instruments Stepper Motor Driver, HTSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+54@@ -0,0 +1,54 @@+# DRV8848PWPR++**Texas Instruments** · Stepper Motor Driver · HTSSOP-16-EP++DRV8848PWPR from Texas Instruments, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | nSLEEP | input | Sleep mode control input with logic high enabling device and logic low activating low-power sleep mode via internal pull-down. |+| 2 | AOUT1 | output | Motor winding A output 1. |+| 3 | AISEN | output | Winding A current sense output connecting to external sense resistor to GND or left open if current regulation not required. |+| 4 | AOUT2 | output | Motor winding A output 2. |+| 5 | BOUT2 | output | Motor winding B output 2. |+| 6 | BISEN | output | Winding B current sense output connecting to external sense resistor to GND or left open if current regulation not required. |+| 7 | BOUT1 | output | Motor winding B output 1. |+| 8 | nFAULT | tri_state | Fault indicator open-drain output pulled low on fault condition and requiring external pull-up resistor. |+| 9 | BIN1 | input | Bridge B input 1 controlling BOUT1 with internal 200 kΩ pull-down and up to 400 ns propagation delay. |+| 10 | BIN2 | input | Bridge B input 2 controlling BOUT2 with internal 200 kΩ pull-down and up to 400 ns propagation delay. |+| 11 | VREF | power_in | Full-scale current reference input accepting 1 to 3.3 V or connecting to VINT if external reference not provided. |+| 12 | VM | power_in | Motor power supply input from 4 to 18 V bypassed with 10 µF bulk and 0.1 µF ceramic capacitors to GND. |+| 13 | GND | power_in | Device ground with PowerPAD also connecting to GND for proper operation. |+| 14 | VINT | power_out | Internal regulated voltage output at 3.3 V nominal bypassed to GND with 2.2 µF 6.3 V capacitor. |+| 15 | AIN2 | input | Bridge A three-level input 2 controlling AOUT2 with support for high-impedance state via internal pull-up. |+| 16 | AIN1 | input | Bridge A three-level input 1 controlling AOUT1 with support for high-impedance state via internal pull-up. |+| 17 | PPAD | power_in | Exposed thermal pad for thermal management connected to device ground for proper operation and heat dissipation. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-16-EP |+| Category | Motor Driver ICs |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `DRV8848PWPR`+- Footprint: `Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)+- 3D model files: `drv8848pwpr-etched.step` / `drv8848pwpr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `drv8848pwpr.step` / `drv8848pwpr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/drv8848) (31 pp, sha256 `176625145c08167f`, retrieved 2026-09-27, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/drv8848pwpr-datasheet.pdf)
page.jsonadded+211@@ -0,0 +1,211 @@+{+ "slug": "drv8848pwpr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Stepper Motor Driver, HTSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "motor driver ics",+ "drv8848pwpr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "drv8848pwpr.kicad_sym",+ "drv8848pwpr.kicad_mod",+ "drv8848pwpr.glb",+ "drv8848pwpr.step",+ "drv8848pwpr.lbr",+ "docs/hero.png",+ "docs/drv8848pwpr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "DRV8848PWPR",+ "manufacturer": "Texas Instruments",+ "package": "HTSSOP-16-EP",+ "pin_count": 17,+ "category": "Motor Driver ICs",+ "subcategory": "Stepper Motor Driver",+ "datasheet": "https://www.ti.com/cn/lit/gpn/drv8848",+ "parts": {+ "symbol": "drv8848pwpr.kicad_sym",+ "footprint": "drv8848pwpr.kicad_mod",+ "model_3d": "drv8848pwpr-etched.glb",+ "model_3d_plain": "drv8848pwpr.glb",+ "model_3d_step": "drv8848pwpr-etched.step",+ "model_3d_step_plain": "drv8848pwpr.step",+ "lbr": "drv8848pwpr.lbr"+ },+ "distributor_links": {+ "lcsc": "C131079",+ "digikey": "296-47770-2-ND",+ "mouser": "595-DRV8848PWPR"+ },+ "distributor_check": {+ "checked_at": "2026-09-27T03:38:34Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-47770-2-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-DRV8848PWPR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "nSLEEP",+ "type": "input",+ "description": "Sleep mode control input with logic high enabling device and logic low activating low-power sleep mode via internal pull-down."+ },+ {+ "number": "2",+ "name": "AOUT1",+ "type": "output",+ "description": "Motor winding A output 1."+ },+ {+ "number": "3",+ "name": "AISEN",+ "type": "output",+ "description": "Winding A current sense output connecting to external sense resistor to GND or left open if current regulation not required."+ },+ {+ "number": "4",+ "name": "AOUT2",+ "type": "output",+ "description": "Motor winding A output 2."+ },+ {+ "number": "5",+ "name": "BOUT2",+ "type": "output",+ "description": "Motor winding B output 2."+ },+ {+ "number": "6",+ "name": "BISEN",+ "type": "output",+ "description": "Winding B current sense output connecting to external sense resistor to GND or left open if current regulation not required."+ },+ {+ "number": "7",+ "name": "BOUT1",+ "type": "output",+ "description": "Motor winding B output 1."+ },+ {+ "number": "8",+ "name": "nFAULT",+ "type": "tri_state",+ "description": "Fault indicator open-drain output pulled low on fault condition and requiring external pull-up resistor."+ },+ {+ "number": "9",+ "name": "BIN1",+ "type": "input",+ "description": "Bridge B input 1 controlling BOUT1 with internal 200 kΩ pull-down and up to 400 ns propagation delay."+ },+ {+ "number": "10",+ "name": "BIN2",+ "type": "input",+ "description": "Bridge B input 2 controlling BOUT2 with internal 200 kΩ pull-down and up to 400 ns propagation delay."+ },+ {+ "number": "11",+ "name": "VREF",+ "type": "power_in",+ "description": "Full-scale current reference input accepting 1 to 3.3 V or connecting to VINT if external reference not provided."+ },+ {+ "number": "12",+ "name": "VM",+ "type": "power_in",+ "description": "Motor power supply input from 4 to 18 V bypassed with 10 µF bulk and 0.1 µF ceramic capacitors to GND."+ },+ {+ "number": "13",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground with PowerPAD also connecting to GND for proper operation."+ },+ {+ "number": "14",+ "name": "VINT",+ "type": "power_out",+ "description": "Internal regulated voltage output at 3.3 V nominal bypassed to GND with 2.2 µF 6.3 V capacitor."+ },+ {+ "number": "15",+ "name": "AIN2",+ "type": "input",+ "description": "Bridge A three-level input 2 controlling AOUT2 with support for high-impedance state via internal pull-up."+ },+ {+ "number": "16",+ "name": "AIN1",+ "type": "input",+ "description": "Bridge A three-level input 1 controlling AOUT1 with support for high-impedance state via internal pull-up."+ },+ {+ "number": "17",+ "name": "PPAD",+ "type": "power_in",+ "description": "Exposed thermal pad for thermal management connected to device ground for proper operation and heat dissipation."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: PPAD (pin 17) is referenced in pin 13 (GND) description and shown in mechanical package outlines but"+ ],+ "pages_sent": 31,+ "cost_usd": 0.4377,+ "at": "2026-09-27T03:38:16"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/drv8848",+ "pages": 31,+ "sha256": "176625145c08167f",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 17,+ "described": 17,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}