component
DRV8847PWPR
Public Made by Adomby adom
Texas Instruments Stepper Motor Driver, HTSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+54@@ -0,0 +1,54 @@+# DRV8847PWPR++**Texas Instruments** · Stepper Motor Driver · HTSSOP-16-EP++DRV8847PWPR from Texas Instruments, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | nSLEEP | input | Sleep mode input; set high to enable device or low to enter low-power sleep mode. |+| 2 | OUT1 | output | Half-bridge output 1. |+| 3 | ISEN12 | output | Full-bridge 12 current sense; connect to current sensing resistor or GND if current regulation not required. |+| 4 | OUT2 | output | Half-bridge output 2. |+| 5 | OUT4 | output | Half-bridge output 4. |+| 6 | ISEN34 | output | Full-bridge 34 current sense; connect to current sensing resistor or GND if current regulation not required. |+| 7 | OUT3 | output | Half-bridge output 3. |+| 8 | nFAULT | tri_state | Fault indicator pin pulled to logic low under fault conditions; requires external pull-up resistor. |+| 9 | IN3 | input | Half-bridge input 3. |+| 10 | IN4 | input | Half-bridge input 4. |+| 11 | TRQ | input | Torque current scalar input pin for dynamic current adjustment. |+| 12 | VM | power_in | Power supply pin; bypass to ground with 0.1µF ceramic and 10µF minimum capacitor rated for VM. |+| 13 | GND | power_in | Device ground; connect GND pin and device thermal pad to ground. |+| 14 | MODE | input | Three-state pin for selecting driver operating mode configuration. |+| 15 | IN2 | input | Half-bridge input 2. |+| 16 | IN1 | input | Half-bridge input 1. |+| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-16-EP |+| Category | Motor Driver ICs |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `DRV8847PWPR`+- Footprint: `Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)+- 3D model files: `drv8847pwpr-etched.step` / `drv8847pwpr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `drv8847pwpr.step` / `drv8847pwpr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/drv8847) (86 pp, sha256 `d437440025a3c724`, retrieved 2026-09-23, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/drv8847pwpr-datasheet.pdf)
page.jsonadded+198@@ -0,0 +1,198 @@+{+ "slug": "drv8847pwpr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Stepper Motor Driver, HTSSOP-16-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "motor driver ics",+ "drv8847pwpr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "drv8847pwpr.kicad_sym",+ "drv8847pwpr.kicad_mod",+ "drv8847pwpr.glb",+ "drv8847pwpr.step",+ "drv8847pwpr.lbr",+ "docs/hero.png",+ "docs/drv8847pwpr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "DRV8847PWPR",+ "manufacturer": "Texas Instruments",+ "package": "HTSSOP-16-EP",+ "pin_count": 17,+ "category": "Motor Driver ICs",+ "subcategory": "Stepper Motor Driver",+ "datasheet": "https://www.ti.com/cn/lit/gpn/drv8847",+ "parts": {+ "symbol": "drv8847pwpr.kicad_sym",+ "footprint": "drv8847pwpr.kicad_mod",+ "model_3d": "drv8847pwpr-etched.glb",+ "model_3d_plain": "drv8847pwpr.glb",+ "model_3d_step": "drv8847pwpr-etched.step",+ "model_3d_step_plain": "drv8847pwpr.step",+ "lbr": "drv8847pwpr.lbr"+ },+ "distributor_links": {+ "lcsc": "C544361"+ },+ "pins": [+ {+ "number": "1",+ "name": "nSLEEP",+ "type": "input",+ "description": "Sleep mode input; set high to enable device or low to enter low-power sleep mode."+ },+ {+ "number": "2",+ "name": "OUT1",+ "type": "output",+ "description": "Half-bridge output 1."+ },+ {+ "number": "3",+ "name": "ISEN12",+ "type": "output",+ "description": "Full-bridge 12 current sense; connect to current sensing resistor or GND if current regulation not required."+ },+ {+ "number": "4",+ "name": "OUT2",+ "type": "output",+ "description": "Half-bridge output 2."+ },+ {+ "number": "5",+ "name": "OUT4",+ "type": "output",+ "description": "Half-bridge output 4."+ },+ {+ "number": "6",+ "name": "ISEN34",+ "type": "output",+ "description": "Full-bridge 34 current sense; connect to current sensing resistor or GND if current regulation not required."+ },+ {+ "number": "7",+ "name": "OUT3",+ "type": "output",+ "description": "Half-bridge output 3."+ },+ {+ "number": "8",+ "name": "nFAULT",+ "type": "tri_state",+ "description": "Fault indicator pin pulled to logic low under fault conditions; requires external pull-up resistor."+ },+ {+ "number": "9",+ "name": "IN3",+ "type": "input",+ "description": "Half-bridge input 3."+ },+ {+ "number": "10",+ "name": "IN4",+ "type": "input",+ "description": "Half-bridge input 4."+ },+ {+ "number": "11",+ "name": "TRQ",+ "type": "input",+ "description": "Torque current scalar input pin for dynamic current adjustment."+ },+ {+ "number": "12",+ "name": "VM",+ "type": "power_in",+ "description": "Power supply pin; bypass to ground with 0.1µF ceramic and 10µF minimum capacitor rated for VM."+ },+ {+ "number": "13",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground; connect GND pin and device thermal pad to ground."+ },+ {+ "number": "14",+ "name": "MODE",+ "type": "input",+ "description": "Three-state pin for selecting driver operating mode configuration."+ },+ {+ "number": "15",+ "name": "IN2",+ "type": "input",+ "description": "Half-bridge input 2."+ },+ {+ "number": "16",+ "name": "IN1",+ "type": "input",+ "description": "Half-bridge input 1."+ },+ {+ "number": "17",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: MODE pin (14) is described as three-state input in datasheet; standard KiCad input type used but ver",+ "exposed pad 17 added from the footprint"+ ],+ "pages_sent": 86,+ "cost_usd": 0.8342,+ "at": "2026-09-23T05:50:44"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/drv8847",+ "pages": 86,+ "sha256": "d437440025a3c724",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 17,+ "described": 17,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}